similar to: Eaton PW5110 + nut-2.4.1 + OpenBSD

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

Hi, I have set up a RaspberryPi computer to do monitoring of two UPSs. One is an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being monitored by another Linux (Ubuntu 12.04) computer, and I just copied and pasted in the relevant nut config and it works just fine with nut. I've tried to set up the Powerware 5110 with nut, and the bcmxcp_usb driver can't communicate

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Citeren "Daniel O'Connor" <doconnor at gsoft.com.au>: > usb_control_msg: 161 1 769 0 0x813310c 2 4000 > USB error: error sending control message: Input/output error > Can't retrieve Report 1: Input/output error > upsdrv_updateinfo... > Got to reconnect! > > usb_set_debug: Setting debugging level to 3 (on) > usb_os_find_busses: Found /dev/usb0 >

Hi Please could someone assist me? I?e got a 3g usb dongle - Huawei E1552. [root@]# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus

Hi! all. I have been reading every mail and news about nut and 06da:0002 Phoenixtec but not found a solution. I have a very nice working ups from: CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" It has COM3 and USB plugs, I don't know if it needs a standar RS232 I have test with varius drivers in ups.conf [MyUPS] driver = bcmxcp_usb | usbhid-ups |

Hi All, I have a powerware UPS 5110 connected to an openindiana server with the bcmxcp_usb driver and running nut 2.65 compiled and installed as root to avoid permission issues. On running the following debug code to test the UPS's communication it fails at the same time with the following error. ./bcmxcp_usb -u root -DDD -a 5110 ....... 2.523879 get_answer: (128 bytes)

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

List: I have an Eaton (Powerware) Model 5115 and am using the bcmxcp_usb driver on a OpenBSD 4.9 system. The upsdrvctl start appears to work and I get a message in my daemon log stating that it successfully started. I can successfully start the upsd daemon. I get a successful start messaage from the upsmon program, but it soon complains of 'stale' data. It looks like the driver

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

Hi, I have got a Powerware 5110 UPS which has a usb interface on it. I have downloaded and compiled nut-2.0.3-pre2 with the usb drivers enabled on RedHat Enterprise V3 however I have been unable to get nut to connect to the UPS. I have tried executing the driver directly (using bcmxcp_usb -DD -u root /proc/bus/usb/002/002) as well as using upsdrvctl with the port set to auto (am I correct in

On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote: > USB error: error sending control message: Invalid or incomplete > multibyte or wide character This is a wild guess, but what about using the option "langid_fix=0x0409"? -- Charles Lepple clepple at gmail

corrupted checksums happen all the time with the 6-port serial card, even when only using one port (and I don't give a shit about the other ports, if anybody has a one-port laying around...) so stop whining already. $OpenBSD$ --- drivers/bcmxcp_ser.c.orig Wed Aug 23 11:15:54 2006 +++ drivers/bcmxcp_ser.c Wed Aug 23 11:26:37 2006 @@ -168,8 +168,8 @@ int get_answer(unsigned char *data, unsi

I am having trouble using the realtek wifi chip in my new tp-link usb wifi dongle. Upon plugging it, the device gets registered by the kernel (in /var/log/messages), but that's about it, no network device is being created (iwconfig does not see it, nothing else works). A few google searches later I found out that this realtek chip is not supported by the kernel and requires a driver, and that

Hi Charles. I have got this output with driver usbhid-ups ups.conf [Phoenixtec] driver = usbhid-ups vendorid = 06da productid = 0002 port = auto #~ langid_fix=0x0409 desc = "CENER ONLINE 1000VA" # export USB_DEBUG=5 # ./usbhid-ups -a Phoenixtec Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '3' 0.000557

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hi, folks! There is FreeBSD 7.1, NUT 2.4.1, UPS APC Smart 2200 XL. NUT is compiled from ports with following options: --------------------------------------- _OPTIONS_READ=nut-2.4.1_5 WITH_SERIAL=true WITH_USB=true WITH_SNMP=true WITHOUT_NEON=true WITHOUT_PDU=true WITHOUT_HAL=true WITHOUT_IPV6=true WITHOUT_CGI=true --------------------------------------- UPS is successfully recognized by OS