similar to: New problem, new thread (I think)

I bought a new CyberPower CP850AVRLCD ups, connected it to a usb port and I'm trying to use it with hal. I installed [root at phoenix ~]# rpm -q nut nut-client nut-2.2.0-6.1.fc8 nut-client-2.2.0-6.1.fc8 lsusb sees it: [root at phoenix docs]# lsusb Bus 001 Device 001: ID 0000:0000 Bus 005 Device 002: ID 0c45:1050 Microdia Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000

I've tried several recipes found with google, but hal likes to grab the USB ups before nut can get it. There are a number of klugey workarounds, like turn off port power until ready to start nut (so that hal doesn't see the UPS). Or killall hal-addon-hid-ups before starting nut. Here is one of recipes I googled: https://github.com/sdgathman/trippfix/blob/master/halpolicy.fdi It

Hi All, I've been trying to trace the cause of a hang on a 5.6 i386 system. After running for almost a year, it hung last week, when I plugged in a screen it was blank, machine was unresponsive to the keyboard, over the network ssh and other daemons didn't respond but the thing has two network cards and routing from one to the other was still working. So the kernel was up and I

Hi fellows, I'm really pleased to announce that a first stage of NUT and HAL [1] integration has been reached: NUT drivers (in fact, only newhidups, tripplite_usb and bcmxcp_usb for the moment) can feed HAL data. It's a "quick and dirty" hack, as a proof of concept, and there is still lots of things to be done, both on NUT and HAL sides. But it's a good base, and very

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

Hi, I am trying to get a tripp-lite UPS monitored. It is connected to a system through usb. Here is my ups.conf: [myups] driver = hidups port = /dev/usb/hiddev0 Here is what lsusb shows: Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 09ae:0001 Tripp Lite Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Here is what reports when I

Hi again, I've succeeded in compiling the svn trunk with the automake tools and wish to say thank you to Charles Lepple for his help. After fixing some parameters in the hotplug script I can now get access to the UPS on /dev/usb/hiddev0 (I added productid and vendorid of my ups to the usermap). I've decided to try the newhidups driver with -x generic parameter and got this response :

Ping? -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) What does "it" mean in the sentence "What time is it?"?

Network UPS Tools version 2.4.3 has been released. http://www.networkupstools.org/ Note: this is only a bugfix release that only solves the regression on IPv6 activation. Direct access: - Download: http://www.networkupstools.org/source/2.4/nut-2.4.3.tar.gz - News: http://www.networkupstools.org/source/2.4/new-2.4.3.txt - ChangeLog: http://www.networkupstools.org/source/2.4/ChangeLog the NUT

Hi, I am wanting to use NUT to connect to an Eaton Powerware 5110 UPS using USB to connect. - I am using NUT 2.0.2 - I have compiled it with USB support - I can see that the UPS is registered as connecting in /var/log/messages eg usb 3-1: USB disconnect, address 3 usb 3-2: new low speed USB device using uhci_hcd and address 4 But I don't know how to progress from here.

Hi all, I just got myself 2 APC Back-UPS CS 350 I downloaded the stable nut tar.gz installed it. This is not the first time i install and configure nut so i used the same configuration as on my other server as i always did. Then i made the 2 required modification. I changed these 2 thing: driver = apcsmart port = /dev/hiddev0 # ls -al /dev/hiddev0 crw------- 1 nut nut 180, 96

some notes: - for this kind of discussion, please cc upsdev list (I've added it), - I've fwded the full thread to upsdev, - this subject is part of what I call NUT-NG (next gen.), aka nut 3.0... - I'll study in depth the thread this week end, and complete with my thoughts, - thanks to Stan to have put us all in touch Arnaud 2006/3/10, Stanislav Brabec <sbrabec@suse.cz>: >

Dear All: I have succeeded in fitting a GAMLSS.dist model to growth data I am working with it. My aim is to create a matrix of predicted percentiles and the corresponding the fitted model's sigma mu nu by agebins. Q: How do it generate these parameters as in L M S per Cole and Green 1992? Here are my working codes. Name of fitted model is gamlssfit > Agebin<-seq(6,36,6)

hi i have a belkin ups here some setting chmod 0600 /dev/hiddev0 chown nut:root /dev/hiddev0 linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No matching USB/HID UPS found Driver failed to start (exit status=1) linux:/home/sonia # /usr/lib/ups/driver/upsdrvctl -u root start

On 7/10/2015 10:23 AM, Sky Flyer wrote: > Many thanks for your prompt reply. > > I mean, imagine you have 3 bits for condition flags in your instruction > (e.g. overflow, zero, carry set, ...) for conditional executions AND > there is no direct access to the Status Register, is it even possible to > implement such scenario? > There doesn't have to be any explicit status

is there a way to override the productid (like -x productid=1234) when using newhidups? just thought i'd try it with the F6C1500-TW-RK over usb. i was able to get hidups to work using the below settings, but it provides limited information. my ups.conf entry: [belkin] driver = hidups port = /dev/usb/hiddev0 and the output of upsc: gateway:/etc/nut# upsc

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

Greetings: I've been following through the instructions on how to connect an APC BackUPS 650 ES to USB, and have it monitored with NUT... I know my system can SEE the UPS, as DMESG shows this: hiddev96: USB HID v1.10 Device [APC Back-UPS ES 650 FW:818.w1.D USB FW:w1] on usb-0000:00:04.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver I can see

ut 2.4.1 works with megatec_usb driver. It tries to interact with a device in /dev/bus/usb/X/Y, but there are root:root 664 access rights. When I try to set port /dev/hiddev0 with write access in config file, in strace there are no records about accessing /dev/hiddev, but still only /dev/bus/usb/X/Y How to explain such a behavior? execve("./megatec_usb",