similar to: Config serial/contact on Cyberpower UPS PR1500LCDRTXL2U

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

Hello, I have a UPS connected to my server with the following: Server is Suse 10.1 Nut version is?Network UPS Tools - Generic UPS driver 1.32 (2.0.4) I installed this around 2005 and cannot remember how I installed the software. ups.conf: [sdrups] driver = genericups port = /dev/ttyS0 desc = "For Server & Backup" upstype = 9 upsd.conf: ACL all 0.0.0.0/0 ACL localhost

Hi, Nut version 2.2.2, Opensuse 11.0 using serial connection using Cyberpower cable. Have 2 servers connected directly using serial. Looking for a way to get this ups and nut to work together. Have tried with powerpanel and cyberpower and they both do not like to talk to the ups. The upsd fails to start. Can somebody guide me to what I do wrong or how I can find the issue. The port is

Is anyone working on anything to support the Cyberpower CP550SL/AE550 Serial? Any idea if it uses the same or similar protocol as the other Cyberpower models? I have an HP 4952A Serial Protocol Analyzer and a Cyberpower CP550SL. Once I get the CP550SL up and working in Windows over RS232 I'll hook up the 4952A and see whats going on. I'm not sure what it uses for default baud rate.

I tried to find a search button for the mailing list but could not. So rtfm me with the link please. If not.. I have an old Deltec PowerRite Pro 2 UPS which has a 9 pin serial cable. By trial and error Im pretty sure I found LB = DCD, but can not get the combination for OB / OL. No matter what I do I get the results below. driver.name: genericups driver.parameter.CP: CTS driver.parameter.LB:

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

I'm running NUT 2.6.3 on Debian wheezy [ with a 3.3.0 i686 kernel ] I've installed NUT via Debian APT [ package nut version 2.6.3-1 ] I have a REDi Blazer 600VA (BLAZER600c) UPS and I want to detect power failures. I have tried the following drivers: * gamatronic: Can't talk to UPS on port /dev/ttyS1! * bestups: Unable to detect a Best/SOLA or Phoenix protocol UPS * blazer_ser: No

I have a Gamatronic Smart Compact 750. I have it connected to my linux machine via serial cable and am running nut 2.0.3. There is no interruption in power, but the ups is reporting OB (on battery). Is there a configuration option I am missing? The relevant ups.conf entry is: [Gamatronic] port = /dev/ttyS1 desc = "Home Gamatronic UPS" driver = genericups

I'm trying to get nut to work with a Cyberpower 900AVR. There are many different products known by this name, but this one has the extra name 'BC900D'. I am told by a cyberpower tech that this one should talk exactly the same USB protocol as the 685AVR, which was recently made to work with newhidups. Unfortunately, when I run the SVN checkout (trunk) of nut-2.1, I get: sstreet

Hello * Trying to get above serial UPS to work gives my some troubles. With upstype=21 [CP=RTS] [OL=CTS] [LB=-DCD] [SD=RTS+DTR] and/or upstype=4 [CP=RTS] [OL=CTS] [LB=-DCD] [SD=-RTS] I do get OL OB LB ok, but shutting down the UPS does not work. Direct call w/ command genericups ... -k and from lowbatt/ initscripts doesnt do. The UPS claims to be capable of and the software shipped (RUPS2000)

Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine. I've followed all the basic guides on setting up NUT and UPS' but have had no luck. My current ups.conf is: [cyberpower-gentoo] driver = cyberpower port = /dev/ttyS0 desc = Workstation Upon running /etc/init.d/upsd start or upsdrv start I get: * Starting

I'm trying to get a CyberPower PP1100 working with NUT on a Fedora 16 system and not having much luck. Kernel: 3.4.4-4.fc16.x86_64 #1 SMP Thu Jul 5 20:01:38 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux NUT (installed from Fedora RPM): nut-client-2.6.4-1.fc16.x86_64 nut-2.6.4-1.fc16.x86_64 libusb: libusb-devel-0.1.3-9.fc16.x86_64 libusb1-1.0.9-0.6.rc1.fc16.x86_64

Hi Is there anybody that knows the protocol for the new UPS's serial interface?

> +22 = Gamatronic UPSs with alarm interface > + [CP=RTS] [OL=CTS] [LB=\-DCD] [SD=DTR] > + > +22 = CyberPower SL seriess > + [CP=RTS] [OL=CTS] [LB=\-CAR] [SD=DTR] > + > + This part of the patch is no good. While TIOCM_CAR is equivalent to TIOCM_CD (at least in some implementations) CAR certainly isn't handled the same as DCD by genericups. It won't be

>> On Nov 21, 2015, at 2:43 AM, R?bert SZAKSZ <robert at szaksz.eu> wrote: >> >> I mesured it and on DC and it shows 0 V (zero V). >> May be the information (pls. see attachment) that UPS PIN1 should bee keept HI is mandatory. Should I connect it to PC PIN4 DTR? > >Certainly possible. blazer_ser and nutdrv_qx should set DTR high and RTS low by default, but

All, I have a Cyberpower UPS that I have been working with for about a year. I have used NUT in the past with good results, but as of late have been seeing issues with nut talking to the UPS. I will start with the information on the server that is running NUT, and has the UPS connected VIA an RS232 cable. O/S : Fedora 9 Kernal (uname -a): Linux haruhi 2.6.26.5-45.fc9.x86_64 #1 SMP Sat

All, I have a Cyberpower UPS that I have been working with for about a year. I have used NUT in the past with good results, but as of late have been seeing issues with nut talking to the UPS. I will start with the information on the server that is running NUT, and has the UPS connected VIA an RS232 cable. O/S : Fedora 9 Kernal (uname -a): Linux haruhi 2.6.26.5-45.fc9.x86_64 #1 SMP Sat

I recently bought a new UPS, and I''m attempting to use nut to monitor it. Following setup instructions everything seemed to go well until it came to testing the connection, which failed. There is just one serial connector on the computer, so I set it to monitor /dev/ttyS0. Either that is wrong, or communication is failing. I''ve been told to try minicom to monitor it,

Hi, I wanted to report some success with monitoring this UPS, a "Geek Squad" brand GS-700U that I purchased earlier this year from Best Buy Canada. Information about this... thing is very scarce so here is what I know: The unit itself is probably made by Cyberpower. It has a 9-pin serial port on the UPS, as well as a serial-USB adapter thing. I cracked open the serial-USB