similar to: Call to NUT RHEL users

FYI, I've fixed the below error in the log, directly on the server. The "pre-revprop-change" hook is not in place, so "svn propedit / propset" do not work. 2010/8/28 Arnaud Quette > Author: aquette > Date: Sat Aug 28 00:23:05 2010 > New Revision: 2504 > URL: http://trac.networkupstools.org/projects/nut/changeset/2504 > > Log: > Fix page titles for

FYI Arnaud ---------- Forwarded message ---------- From: Silvino Benevides Magalhaes <sbm2yk at gmail.com> Date: 2009/10/14 Subject: Re: about solis and rhino To: Arnaud Quette <aquette.dev at gmail.com> Hi Arnaud, I was on holiday, so I only answer you now. About rhino, I received a document contains the its protocol and a little box with rhino firmware to testing driver

Hi Patrick, 2010/11/15 Patrick O'Malley > I've confirmed that the CyberPower CP1350AVRLCD works with nut using > the USB port and the usbhid-ups driver. It is not on your list. > Thanks! > have you checked all variables, and most of all that shutdown works as expected? ie http://new.networkupstools.org/user-manual.html#Testing_shutdowns please also send us an upsc output.

2009/5/16 Arnaud Quette <aquette.dev at gmail.com> > > > 2009/5/7 Daniel O'Connor <doconnor at gsoft.com.au> > >> On Wed, 6 May 2009, Arnaud Quette wrote: >> > I think I've found something, but I would need an upsd debug output >> > (level 3) to see what going on the state socket. >> >> I've attached a log for you. >>

thanks for these info. 2009/3/19 Artyom Mikhailov <artyom.mikhailov at gmail.com> > Hi there, > > Great project you have - NUT, thx for the development! > I just thought it might be usefull to let you know that APC SC1500I ups can > be found supported by NUT. > I used the following settings: > [sc1500i] > driver = apcsmart > port = /dev/ttyUSB0

Hey Jarett, 2009/2/24 <jarett.stevens at usermail.com> > After upgrading to the 2.4.1 version, I wasn't able to read as many > variables from my UPS. After a bit of experimentation, I determined that > the firmware on my UPS was different than what is currently in the > apcsmart driver, though it had worked before. I located my firmware > version (5ZM), and added in

Hey, I'm scheduling a 2.6.2 release for max. September 15. The content will be lighter than first expected with 2.8.0 (see below). This includes the current trunk plus: - merge the nut-scanner branch, - some snmp-ups improvements (sysOID matching for init stage) and some more MIBs, - a first complete version of the nut-ipmipsu driver, - the new jNut Java binding, - preliminary support of

Network UPS Tools version 2.4.1 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.4/nut-2.4.1.tar.gz - News: http://www.networkupstools.org/source/2.4/new-2.4.1.txt - ChangeLog: http://www.networkupstools.org/source/2.4/ChangeLog Arnaud and the NUT team -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops

2009/4/28 mvochin <mvochin at elcom.pub.ro> > Hi Arnaud, > Hi > > Regarding ups compatibility list, Apollo 1000A, and 1000F Line > Interactive Series is also supported as genericups upstype=4 (I guess the > whole apollo family is supported with this driver) > http://www.apollotw.com/products-li.html I have some hard time trying to access it. anyway, I've

Hi Saulius, The spec you sent me is simply a Megatec excerpt: http://www.networkupstools.org/protocols/megatec.html So Socomec is simply a megatec rebranding (selling by simply putting its name on). As per the NUT compatibility list (http://www.networkupstools.org/compat/stable.html), Sicon are supported by the powercom driver. But since it's a megatec unit, you should preferably try the

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Dear users and developers, just a small mail to inform you that: * EATON protocols library is now mostly complete! UPSCode II has been published for some time now. I've just released this morning a full set for the XCP protocol (Powerware), including the general information, and Alarm / Meters maps. The MGE section was already complete for long. * some more development units have been

2010/10/13 Vitaly Lavrov > I found bug in nut/drivers/megatec.c - force shutdown may dont work. > See patch. > could you please give a try to blazer, since it is set to replace megatec with 2.6.0. Arjen will quite probably comment on your patch usefulness within the blazer scope. thanks for your contrib. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton -

Network UPS Tools version 2.4.0 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.4/nut-2.4.0.tar.gz - News: http://www.networkupstools.org/source/2.4/new-2.4.0.txt - ChangeLog: http://www.networkupstools.org/source/2.4/ChangeLog Arnaud and the NUT team -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops

Some side notes and comments on this commit... 2011/4/15 Arnaud Quette <aquette at alioth.debian.org> > Author: aquette > Date: Fri Apr 15 09:15:16 2011 > New Revision: 2969 > URL: http://trac.networkupstools.org/projects/nut/changeset/2969 > > Log: > Refreshed graphic illustrations (provided by Eaton) > > Modified: > trunk/docs/images/advanced.png >

Hi Chad, Thanks for your report. Everything seems fine, apart from the battery.date (2052/00/36), which vaguely recall me something... I've added this info to the Testing and trunk driver.list Arnaud -- Please note my new email address: arnaudquette at eaton.com -- Linux / Unix Expert R&D - MGE Office Protection Systems - http://www.mgeops.com Network UPS Tools (NUT) Project Leader -

Since I've heard about AsciiDoc (thanks ESR), I'm in the process of revamping the full Network UPS Tools documentation and website. Without going into the usual "it curred my desease, got my wife back home, and made me won a billion", it really saved my life ^_ ^ I was searching for such tool for years! thanks a lot Stuart and others. Kudos for the work! NUT revamp is not yet

Hi Dag 2010/2/28 Dag Atle Nettum <dagatle at innit.no> > Hello > > > > I understand you are the project leader of Nut. > > > > In my company we have a Eaton 9135 6000 UPS, we are running NUT 2.4.1 > (Debian squeeze) > > > > The ups is connected with a USB cable but it reports a temperature of 300 > degredes. > > > > Can I send you

Dear NUT users and developers, As usual now, here is my end of the year announcement. This year has been very overloaded on my side, and full of major changes in the UPS world. First, with MGE buying APC through Schneider (MGE's mother firm). Then with MGE being disbanded, and partly sold to Eaton (the mother firm of Powerware), and reborn under the name MGE Office Protection Systems. Those

Fellows, I'm pleased to announce that David Goncalves has now joined the NUT Team. David is working for some time on the NUT Python support, through: - the PyNUT module, which currently provides client access, and which will soon provide some configuration helpers, - the NUT-Monitor client GUI. So, congratulations to David for joining the team! and thanks for his much appreciated