similar to: demo site

Hi all, I use an APC Back-UPS RS 800, overall my experience with NUT is very good but there is one feature I am missing: the ability to ask the UPS for a battery test. upscmd -l shows the following commands available: $ upscmd -l rs800 Instant commands supported on UPS [rs800]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS

Hi all, First of all, I would like to thank everyone who was involved in the development of NUT. Although it took me some time to set it up, now it appears to be working very well. Thanks for the good software! This is my success report for an APC Back-UPS RS 800: khali at mahadeva:~> upsc rs800 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25

Hello!! I have a APC Back-UPS RS 800 and I'm using NUT v2.2.2 on a PowerPC powered NAS. With WinNut, I found the ups.load value strange, so I've done a "upsc ups" and got this results: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2007/12/28 battery.runtime: 997 battery.runtime.low: 120 battery.temperature:

Hi folks, The last release of nut, 2.4.1, happened almost one year ago. Don't you think it would be the right time for a new one? Thanks, -- Jean Delvare

Statically allocated array of pointed to hwmon_channel_info can be made const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> --- This depends on hwmon core patch: https://lore.kernel.org/all/20230406203103.3011503-2-krzysztof.kozlowski at linaro.org/ Therefore I propose this should also go via hwmon tree. Cc: Jean Delvare <jdelvare at suse.com>

Hi Greg, The following two patches move /sys/o2cb into /sys/fs/o2cb as we previously discussed. A symlink is created to maintain compatibility with existing versions of ocfs2-tools. A patch to automatically search /sys/fs/o2cb has been committed to the ocfs2-tools repo and a release with that code shouldn't be too far out. Old versions of ocfs2-tools have been tested and work fine with the

On 4/7/23 08:01, Krzysztof Kozlowski wrote: > Statically allocated array of pointed to hwmon_channel_info can be made > const for safety. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> > > --- > > This depends on hwmon core patch: > https://lore.kernel.org/all/20230406203103.3011503-2-krzysztof.kozlowski at linaro.org/ > >

On 4/10/23 02:56, Michael S. Tsirkin wrote: > On Fri, Apr 07, 2023 at 04:08:30PM -0700, Guenter Roeck wrote: >> On 4/7/23 08:01, Krzysztof Kozlowski wrote: >>> Statically allocated array of pointed to hwmon_channel_info can be made >>> const for safety. >>> >>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> >>>

An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080225/377bed98/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: usbhid-ups.loghid-ups.log.D4.zip Type: application/zip Size: 5428 bytes Desc: not available Url :

Hi, I had posted a similar question a few days back(but my mails started bouncing back, when I tried to post to the newsgroup). So here is it again. My System: Rh 9.0 (2.4.20-13.9), openssl-0.9.7a-5, openssl-devel-0.9.7a-5 Autoconf tools: autoconf-2.57-3, automake-1.6.3-5 1. When I try to compile tinc-1.0 pre8 on my RH 9.0 system, it fails.. When I do a ./configure, it aborts saying:

Hi guys, Are there any feasible methods in searching & finding non-ASCII characters in R? For example, from the following object, x <- mia. SzaÌmitaÌó The desired output is, x.out <- mia. SzaImitaIA Your help in resolving this would be greatly appreciated. [[alternative HTML version deleted]]

Hello, I am a relatively new R-user who has a lot to learn. I have a large dataset that is in the following dataframe format: red A B C green D blue E F Where red, green and blue are "species" names and A, B and C are observations (corresponding to DNA sequences). Each observation can only belong to one species. I would like to list the observations in one column, with the species

Hi, (This only concerns MISNeedChainEdge(), and is separate from D8705) I found out that the MIScheduler (pre-ra) could not handle a simple test case (test/CodeGen/SystemZ/alias-01.ll), with 16 independent load / add / stores. The buildSchedGraph() put too many edges between memory accesses, because 1) There was no implementation of areMemAccessesTriviallyDisjoint() for SystemZ. 2) Type

Dear all, I am relatively new to R and have had some difficulty in understanding an error i get when running a code to solve a system of non-linear equations, with four equations and two variables. This is my code: ALPHA <- c(-0.0985168033402, 0.1, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4) BETA <- c(-0.0985168033402, 0.1, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4) GAMMA <- c(0.3940672148378, 0.1, 0.15,

Hello, While tuning the MIScheduler for my target, I discovered a code that unnecessarily restricts the scheduler. I think this is a bug, but I would appreciate a second opinion. In file ScheduleDAGInstrs.cpp, the function MIsNeedChainEdge determines whether two MachineInstrs are ordered by a memory dependence. It first runs through the standard criteria (Do both instructions access memory?

Santi, In the second line of your function you have the following: f <- numeric(length(x)) This sets the length of this numeric vector (i.e., "f") to the length of the vector "x". Later, inside the function you assign to values to 4 elements of the vector "f". This assumes that "f" is at least 4 element in length. However, you define

Hello, I am working with two different data frames, and I'd like to move data from one to the other. Here is the first frame: > head(five) Week Game.ID VTm VPts HTm HPts HDifferential VDifferential 1 1 NFL_20050908_OAK at NE OAK 20 NE 30 10 -10 2 1 NFL_20050911_ARI at NYG ARI 19 NYG 42 23 -23 3 1 NFL_20050911_CHI

Hi all, I want to install clang on CentOS 7. After executing "yum install clang", it outputs: [root at hp ~]# yum install clang Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.mia.host-engine.com * elrepo: elrepo.mirrors.arminco.com * extras: centos.arvixe.com * updates: centos.eecs.wsu.edu No package clang available. Error: Nothing to do

Hello, I'm looking for what I'm sure is a quick answer. I'm working with a data set that looks like this: Week Game.ID VTm VPts HTm HPts Differential HomeWin 1 1 NFL_20050908_OAK at NE OAK 20 NE 30 10 FALSE 2 1 NFL_20050911_ARI at NYG ARI 19 NYG 42 23 FALSE 3 1

great!! thanks very much, mean(unlist(lapply(listdata, function(z) z$c))) works well. and what about getting the average table $a (displaying the average elements across all 1000 matrix)? could you please help me? I am struggling with this... thanks in advance Roberto mean(unlist(lapply(x, function(z) z$d))) should do the trick On Sun, 12 Feb 2006 20:06:12 +0000, statistical.model at