Displaying 20 results from an estimated 900 matches similar to: "Fwd: NUT and removed allowfrom/ACCEPT/REJECT support"
2003 Nov 27
2
Question about adding another parameter for OpenSSH
Hello,
I need to allow for some people to execute ssh with one shared private
key for remote executing command on various machines. However, it is not
possible to set group permissions for private keys and it is possible
to have just one private key file for one user. Please, is it possible
to add patches into openssh development tree like these, so that standard
behavior of ssh is not changed,
2010 Jan 18
0
2.2.1 to 2.4.1 migration (allowfrom/tcp_wrappers)
Hello,
I just upgraded my nut 2.2.1 setup to 2.4.1. The "upsdrvctl shutdown"
command now works using a APC Backup-UPS CS350 via USB. Great!
The removed ACL/allowfrom functionality can be replaced by tcp_wrappers.
Unfortunately there isn't much documentation about the migration.
First you have to compile nut with "--with-wrap".
I have a special "nutadmin"
2011 Mar 10
1
Access restriction on Upgrade Debian lenny -> Debian squeeze
Hi,
In Debian lenny I used the following in upsd.conf:
ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32
ACL webinterface 192.168.0.2/32
ACL slave 192.168.50.22/32
ACCEPT localhost
ACCEPT webinterface
ACCEPT slave
REJECT all
and in upsd.users:
[monmaster]
password = secret0
allowfrom = localhost
upsmon master
[monslave]
password = secret1
allowfrom =
2006 Jan 09
2
Master privileges unavailable
Hi,
I'm using debian sarge on my server and connected a MGE-ups ellipse via
the serial port.
I searched the internet for the answer, but can't find it.
My config files:
<upsd.users>
[admin]
password = pwd
allowfrom = 127.0.0.1/32
actions = set
instcmds = all
[upsmon]
password = pwd
allowfrom = 127.0.0.1/32 10.0.0.224/32
upsmon master
[upsslave]
password
2011 Mar 10
1
Problems with upscmd ACCESS-DENIED
I'm trying to execute some commands on my ups, but I keep getting ERR
ACCESS-DENIED
upscmd -l sinus
Instant commands supported on UPS [sinus]:
beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop -
2014 Aug 04
3
[LLVMdev] Publication: Languages Used in LLVM During Compilation
Hello,
for one course at our Brno University of Technology, I made a
presentation about languages used in LLVM during compilation.
I think also other may find it useful, so I am sending it
here, so you can add it somewhere on the web if you will
would like to.
It is not exactly a publication, rather lecture
slides.
Title: Languages Used in LLVM During Compilation
Date: 30th April 2014
2008 Jul 30
1
machine not shutting down and connection failures in logs
Hi,
this is my first nut installation, i see lot of connection failure and when i tried
the configuration removing the power chord from the ups i expected tha machine will
power itslef down but this has not happened.
I'm using nut 2.2.2-2 from debian lenny, ups is a mustek powermust 2000 with usb cable.
All config files are root:nut and 640, i've had to add nut user to nut group
2009 Mar 07
3
"Master privileges unavailable on UPS" after upgrade to Debian Lenny
Hi all,
I've just upgraded my debian box from etch to lenny, and am now having
Nut problems. I have read through the UPGRADING text (which helped
fixed my first ups driver related problem), but have now hit another
problem, which seems quite common, but non of the responses I've found
on Google apply, so I'm coming to you for help.
On issuing a "/etc/init.d/nut start"
2006 Aug 25
2
suse linux and nut
hi
i bought a ultra ULT31502 ups
someone seem able to run this ups with nut
just see Dean thread on:
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0
i use suse 10.1, i installed nut
the ups is connected directely to my computer with an usb cable
lsusb return
Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd
with lsmod, i can see
2016 Nov 25
2
Can't get NUT slave to connect to master
Hi thanks Roger,
I've amended my hosts.allow file to your suggested one - thanks for that.
I'm still getting "Connection refused on the client cgi screen as well as
in the shell it gives me UPS upsname at ipaddresshere is unavailable...
Any ideas what I can try next to debug why it's not working. Also should
the "allowfrom = clientIPaddresshere" line be in my monuser
2006 Dec 27
3
Help with nut 2.0.4, MGE Ellipse 1000 and FreeBSD
Hello.
So as my english is not so good, i'll try to write my story in bash commands
:o)
miwa@zork3$ uname -mrs
FreeBSD 5.5-STABLE i386
miwa@zork3$ su
root@zork3# cd /usr/ports/sysutils/nat
root@zork3# make && make install
root@zork3# cd ../nut-usb
root@zork3# make && make install
root@zork3# cd /usr/local/etc/nut
root@zork3# cat ups.conf
user=root
[MGE-Ellipse]
2006 Nov 16
6
FreeBSD 6.1, MGE Ellipse ASR600USBS, newhidups & upsd
Hello,
I'm facing problems as I'm installing NUT to monitor a MGE Ellipse
ASR600USBS on a FreeBSD 6.1 box.
UPS is recognized as :
ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2
I'm temporarily using root profile (devfs/devd scripts not modified atm).
newhidups starts & runs fine (unplugging mains makes newhidups outputs
lots of data when started with -DDDD flags)
2006 Feb 14
3
Master privileges unavailable on UPS
Hello all,
I'm having problems with what I'm told should be a straightforward
issue.
The message in /var/log/daemon is:
<quote>
Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on
UPS [lupin1500AVR@localhost]
2006 Jul 03
1
clamav upgrade help and info
Dear list...
In regards to recent upgrade in www.clamav.net to 0.88.3 and...
...as an example I've used this page to create a process where I can create
my own clamav programs/stuff/etc...
http://qmail.jms1.net/clamav-upgrade.shtml
and so I would go to http://crash.fce.vutbr.cz/crash-hat/4/clamav/ and snag
the source rpm that Petr made for Fedora 4.
He hasn't updated yet (pretty sure
2004 Feb 13
1
samba-docs mailing list
Hello
How do I subscribe to samba-docs mailing list? The list is listed at
http://samba.kn.vutbr.cz/samba/archives.html
however it is not listed on the subscription page at
http://lists.samba.org/mailman/
judging by grepping 'samba-docs' in the page and finding nothing.
Cl<
2009 Jun 25
0
[LLVMdev] Replacing instruction in LLVM IR by an intrinsics
On Thu, Jun 25, 2009 at 12:32 AM, ihusar<ihusar at fit.vutbr.cz> wrote:
> //now i need to create an instruction that represents a call to a intrinsic
> Function* FIntr = Intrinsic::getDeclaration(&M, Intrinsic::regread_i32);
>
> // here it fails: void llvm::CallInst::init(llvm::Value*):
> //Assertion
2009 Mar 01
7
Poll UPS / Driver not connected with UPS MGE Evolution 850VA USB
Hello,
I encounter a problem using the UPS MGE Evolution 850 VA USB with
Debian Etch and the nut package available for this version. I got this
error:
==syslog==
Can't connect to UPS [MGE850VA] (usbhid-ups-auto): No such file or
directory
upsd[2767]: Startup successful
upsmon[2769]: Startup successful
upsd[2767]: Connection from 127.0.0.1
upsd[2767]: Client MGE at 127.0.0.1 logged
2007 Feb 16
3
Belkin F6C100-UNV + newhidups
Mr. Selinger,
I'm CCing you directly since it appears (insofar as I can tell) that you
are one of the delelopers for the newhidups driver.
This is the third time I've submitted this (hence the CC this time).
Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping
that was the problem.
My sincere apologies if this has gone through and I just haven't seen it
2008 Jul 11
1
upsmon issue: user monuser not found
Short description: when upsmon starts it logs this to /var/log/messages:
Jul 11 12:35:55 sorcerer upsmon[23902]: Startup successful
Jul 11 12:35:55 sorcerer upsmon[23902]: user monuser not found
Near as I can tell upsd is running properly.
Long description:
Centos 5 system (x86_64), built nut 2.2.2 from stable source with
./configure --with-usb --with-user=nut --with-group-nut
make
2002 Sep 25
10
Reading complicated data file
Hi, I am new in R and I have problem with reading this data file
0 TITLE Title
0 XLEGEND Legend
-1 LABEL x
1 1 12
1 2 30
1 3 34
I want to read only lines starting with 1 (it indicates 1st plotting line)
and create data set from second and third value on this row.
Thank for advice
Jakub Zlamal
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
r-help mailing list