similar to: Status of nut snmp SUBagent

I followed Marks SNMP howto on Voip Magazine and ran into a small problem... (http://www.voip-magazine.com/content/view/2877/0/1/3/) When asterisk is running as a non-root user (asterisk) SNMP request for for the Asterisk MIB tree return nothing. If I quit asterisk and run it as root, all is fine. Does anyone have a idea what is going on? I have never used agentX, so I am unsure of what it is

Sorry, because this is not a technical question rather than a Hardware advice/recommendation. I have been using NUT-UPS perfectly for more than 7 years using two different Eaton/MGE models. After a battery replacement (replaced 1 year ago) after 5 years of service, my current unit seems to behave faulty, as just after 1-2 minutes of power outage, shows the LB battery flag and sets FSD although

Hi, recently I observed that during a power outage, my NUT setup doesn't shutdown properly. Indeed it never reaches the LowBattery state to notify and initiate shutdown on clients. Reviewing my setup and logs I think I'm facing multiple problems and I'm unable to point to real root cause. First, let me focus on my scenario and current setup: In normal status (ONLINE, fully charged)

Hi! After some problems doing the automatic shutdown of the UPS on Debian, I have found this Debian bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=293401 Now I fixed it calling always ups-monitor from the halt script despite being halt'ed' or powered off (and relying on the POWERDOWNFLAG be set). Which is the correct aproach or best solution to workarround this bug? And now my

Hi, Trying to follow the recipe at http://wiki.centos.org/HowTos/Cacti_on_CentOS_4.x Which has a bit of an update for 5.x, but no joy. Anyone know what this from Cacti should suggest? Data Query Debug Information + Running data query [9]. + Found type = '6 '[script query]. + Found data query XML file at '/var/www/cacti/resource/script_server/host_cpu.xml' + XML file parsed

Hi One idea I've had for some time, but unfortunately not had time to implement, is to add a general SNMP agent, which will work with all UPSes supported by nut. The idea is to have the SNMP agent use the "nut API" to fetch values from the UPS. So the SNMP agent will be similar to the "upsc" utility. Whenever the SNMP agent is queried for information, it will use the

Hi Everyone, I have been searching the web and I don't know if SNMP is just that complex to setup or that not many people use SNMP to monitor Asterisk but the information is scattered all over. I have got to the point to configure SNMP with Asterisk and then it's all confusing from there on to actually see the graphs in Cacti. I would appreciate it if you can post your steps or point me

Hi to all, today I have released the version 0.3 of ast-ax-snmpd. It is some code that adds the snmp subagent functionality to asterisk, using the ucd snmp framework and following the agentX standard. It has tested under debian woody, with specific version of ucd_snmp, so your mileage may vary. I am evaluating to transfer this effort under a more recent net-snmp umbrella, this could permit

My UPS is a Eaton Ellipse 1000S (But its identified as MGE Ellipse 0463:ffff). I have been using the usb interface with the usbhid-ups driver, but I found that sometimes (too much times) the driver doesn't respond and NUT doesn't receive changes nor notifications from the UPS. The kernel lose the connections with USB device, in the kernel logs appears: Dec 30 11:24:12 rei kernel:

Hi, I've been using TrippLite's PowerAlert software with my RM2200XL2U rack system and my APC BackUPS desktop systems. Unfortunately it doesn't work with openSUSE 10.2 (the software has problems with the serial port and UPS interfaces on openSUSE 10.2), so I've been looking at other options. I see that openSUSE 10.2 includes NUT, and it appears to work with my TrippLite UPS via

Hi I''m trying to move the tracking of the shaping from MRTG to Cacti. My predecessor, who built all this stuff and was far more advanced than I, had a shell script that collected data by running tc -s qdisc show dev on both eth 0 and 1 and then pushing it out via snmp to another server running MRTG. I''m building a new server with cacti and having trouble with the custom

Hi, I`m trying to use the agent snmp buit in the asterisk-1.4, but I can`t do this... I used this link to do it: http://www.voipphreak.ca/archives/382 but I can't... Does somebody know how to do this or knows a how-to to do this?? Thank's _______________________________________________________ Yahoo! Mail - Sempre a melhor op??o para voc?! Experimente j? e veja as

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

Hello all, Does anyone know if it exists a xen specific SNMP subagent ? My need is to collect through SNMP, from a dom0, informations related to running domUs and more generally all xen related stuff, for use with Cacti and more. Thanks for answers. Alain Barthe. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

what a better snmp app for centos? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20051221/afea793d/attachment-0001.html>

Hello, I'm trying to monitor asterisk with snmp. I'm using asterisk 1.4.4 compiled with res_snmp on a debian stable: *CLI> module show like snmp Module Description Use Count res_snmp.so SNMP [Sub]Agent for Asterisk 0 I've configured asterisk in res_snmp.conf: [general] subagent = yes enabled = yes and when asterisk start print

Hi all, I hope someone can help me with this one. I'm trying to graph all traffic on the localhost's network card with Cacti. >From what I understand I should use SNMP to query the traffic, but I can't seem to get SNMP info for the network interface. I have installed all the necessary snmp tools, "yum install snmpd net-snmp net-snmp-utils net-snmp-devel net-snmpt-libs "

Hello guys, I was some years ago when I sent something to this list. NUT is a great tool but lacks SNMP management. It can access a device using SNMP but I found no way to read NUT values using SNMP. It would be very useful in order to integrate with network management software based on SNMP. As I did not find a solution, I wrote it myself. I wrote a MIB file and a SNMP agent for net-snmp

Hello guys, I was some years ago when I sent something to this list. NUT is a great tool but lacks SNMP management. It can access a device using SNMP but I found no way to read NUT values using SNMP. It would be very useful in order to integrate with network management software based on SNMP. As I did not find a solution, I wrote it myself. I wrote a MIB file and a SNMP agent for net-snmp

Does anyone know if the 3.8 update will fix the long-standing problem with snmp interface counters on 64 bit machines? I think it was mentioned in the RH notes, but they said that a year ago too... (The problem is that the 32 bit counters don't wrap correctly so mrtg/cacti graphs go crazy after 2 gigs of data have gone by). -- Les Mikesell lesmikesell at gmail.com