similar to: Belkin 800VA Universal AVR doesn't warn about battery

2008/4/10, David Erosa <david.erosa at gmail.com>: > Public bug reported: > > Binary package hint: nut > > After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb > driver seems to be working, except for the charge percentage: > > $ /lib/nut/megatec_usb -DDDDD -a SAI > ... > Checking device (0665/5161) (001/007) > - VendorID: 0665 >

Zaid, I have a Belkin F6C800-UNV which has both a serial and USB connector. The serial connection is already working with the Belkinunv driver. I will connect via the USB and then compare both sets of variables. This should allow me to correlate and shed some light on the meaning of many of Belkin's non-standard "Usage" descriptors. With this information, it should be very easy

Hello list, I am trying to configure Belkin F6C550-AVR UPS on a Squeeze server. I try with "usbhid-ups" but I get "(driver(s) failed)" message on service start. This is my config: nano /etc/nut/nut.conf MODE=standalone nano /etc/nut/ups.conf [belkin] driver = usbhid-ups #driver = megatec_usb port = auto nano /etc/nut/upsd.conf LISTEN 127.0.0.1 3493 nano

Hello, I am attempting to set up nut 2.6.2-1on a Fedora Core 14 64-bit platform for Belkin F6C550-AVR. The installation is from the official Fedora RPM. /etc/ups/ups.conf is as follows: [belkin] #??? driver = blazer_usb ??? driver = usbhid-ups ??? port = auto Attempting as root: [root at calypso ~]# upsdrvctl start Network UPS Tools - UPS driver controller 2.6.2 Network UPS Tools - Generic HID

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

Carlos, is this bug a known regression of 2.2.1 vs 2.2.0? I can't find much in the ChangeLog. https://bugs.launchpad.net/bugs/209001 thanks, -- Arnaud

Hi Everyone, I am new to UPSs and Linux.? I purchased a Belkin F6C750-AVR UPS for our church.? We are?running CENTOS 5.2. I tried the Linux Power Management Software that came with Belkin UPS with NO success. I installed the NUT software. After some experimentation I received some success with the megatec_usb Nut driver: [root at server bin]# /sbin/megatec_usb -u root -a serverups -DDDD

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi Sorry about this 2nd message... I forgot to say, the diff is based on the 2.0.3 tarball from www.networkupstools.org. Jo Turner -xx- -- jT | mail to: hyvan_trant@hotmail.com ** | website: http://www.chiark.greenend.org.uk/~jsturner/

Hi I'm sending this to you as it appears that you are the person who looks after and/or supervises the code for NUT's Belkin drivers. I'm using the address you use for the Nut-upsdev mailing list ( selinger at mathstat.dal.ca ). Anyway... I have a Belkin Universal UPS and, having just upgraded my Fedora Core system from 4 to 5 and had to go back through the system RC files

Hello, http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-September/003137.html http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-July/003014.html http://permalink.gmane.org/gmane.comp.monitoring.nut.user/2552 I still have this problem: $ dpkg -l | grep -i nut ii nut 2.2.0-2 The core system I thought this bug was fixed :( syslog:Dec 10

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

I have a library I''ve developed that I believe is the most flexible and useful table sorting/striping/row-selecting library around. Big features: Single and multiple-level sort Arbitrary sort criteria (IP address, date, etc.) Works with table headers that are > 1 row or column large Stripe tables and/or enable row selecting Row selecting supports drag-select and SHIFT-click No extra

Hello everyone! A simple question (I'm not sure about the answer): How can I give a name to my data.frame from a character vector of names? For example, each data.frame is a table of results for a subject and I have a vector of subject names like b <- c("math", "geography", "history") How do I create a data.frame named "math" by calling b[1]?

I'm probably not the first with this idea so I guess that there's a complex issue behind it but since I couldn't find an answer I just though to ask: Wouldn't it be nice to have color coded objects as output of ls() statement? Functions of one color and rest with other (at least). So when I issue an ls() I could visually discern different types of objects. I often find myself

Hello everyone. For reasons too long to explain I wanted to do plots similar to histograms with plot(type="h"). I ran into a problem - if I set line width too high, histogram isn't accurate anymore. For example: par(lend=2) plot(c(2,4,3,2),ylim=c(0,5), type="h") abline(h=3) Column 3 appears just as high as it should. But if I do par(lend=2)

Hello, I?ve got a strange misconfiguration where the following command: doveadm -f pager mailbox status -u spamutf8 'messages vsize guid' INBOX 'INBOX.*' ? fails with error code 68, saying that it can?t find one of the mailboxes. (It lists the user?s other mailboxes.) The name of the mailbox in question is saved to disk in UTF-8 rather than mUTF-7, but strace shows that doveadm

Hi, Consider this simple plot: > plot(1:25,runif(25,0,1),ylab="First Y-axis label",xaxt="n") I want to add an additional axis as > axis(4,at=seq(0.2,1,.2), labels=1:5) I have no idea how to add now the title of the new axis as "Second Y-axis label". I want this text to be vertically directed from bottom to top. I can't find the function in text() to write