similar to: Belkin support?

Greetings; Its unk because whats plugged in seems to be blocking the rear name plate. About all I can recall is that its big, 3 battery unit, rated somewhere north ob 1250 VA. Its an 050D:0751 Belkin. What driver should I use, and what file is that set in? The nut version presently and freshly installed is from the Ubuntu 10.04.4 LTS repo's. Probably old, but IIRC it also worked with

On Oct 12, 2014, at 8:28 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Its unk because whats plugged in seems to be blocking the rear name plate. > About all I can recall is that its big, 3 battery unit, rated somewhere > north ob 1250 VA. > > Its an 050D:0751 Belkin. > > What driver should I use, and what file is that set in? Looks like it is in usbhid-ups. If

Greetings Charles; Following the chapter 6, configuration notes, and having configured everything I had done previously in the repo built /etc/nut directory without any success previously, I found when trying: /usr/local/ups/upsdvrctl start, It reported it couldn't open /usr/local/ups/etc/ups.conf So I copied what I had done before to that path by mv'ing them with mc. Then I checked

On Nov 11, 2014, at 9:41 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Can't claim USB device [050d:0751]: could not detach kernel driver from > interface 0: Operation not permitted > Driver failed to start (exit status=1) > > In /dev/ttyUSB0 is owned by root. /dev/usb/hiddev3, the last one, has a > slow data marching out of it if I sudo cat /etc/dev/usb/hiddev3

Hi Charles; I hope this finds you well. Here is dmesg output: gene at coyote:~$ dmesg |grep Belkin [ 3.315667] usb 2-3: Product: Belkin UPS [ 3.315669] usb 2-3: Manufacturer: Belkin [ 4.084258] generic-usb 0003:050D:0751.0009: hiddev0,hidraw4: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.0-3/input I have configured it to use this generic-usb, and probably made it less

Greetings all; Back to a thread I started back in May of 2008 I think. I never did get this belkin and nut to talking, so I thought I'd make another run at it. Trying to run the driver as the user gene, I'm getting this: --------------------------- [root at coyote ups]# su gene -c "/sbin/belkin -D -a myups" Network UPS Tools - Belkin Smart protocol driver 0.21 (2.2.2) debug

On Sun, Mar 1, 2015 at 2:23 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Hi Charles; I hope this finds you well. Hi Gene, > Here is dmesg output: > gene at coyote:~$ dmesg |grep Belkin > [ 3.315667] usb 2-3: Product: Belkin UPS > [ 3.315669] usb 2-3: Manufacturer: Belkin > [ 4.084258] generic-usb 0003:050D:0751.0009: hiddev0,hidraw4: USB HID v1.11 Device

On Tuesday 14 October 2014 08:19:02 Charles Lepple did opine And Gene did reply: > usbhid-ups Added that, but only get this at "sudo service nut start" gene at coyote:/etc/init.d$ sudo service nut start * Starting Network UPS Tools [ OK ]

On Sunday 12 May 2019 02:41:02 pm Charles Lepple wrote: > /lib/nut/usbhid-ups -a myups -DD gene at coyote:~$ /lib/nut/usbhid-ups -a myups -DD Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 Can't open /etc/nut/ups.conf: Can't open /etc/nut/ups.conf: Permission denied lemme see who owns that. huh? amandabackup:nut what the h? Who is supposed to own

On Thursday, February 19, 2015 10:16:41 PM Charles Lepple wrote: > On Feb 19, 2015, at 8:55 AM, Gene Heskett <gheskett at wdtv.com> wrote: > > On Wednesday, February 18, 2015 08:11:13 PM Charles Lepple wrote: > > [...] > > > >> On recent Debian and Ubuntu with 2.7.2 and > >> earlier, there was an issue where the udev rules file needed to be >

Hi Arjen My apologies fro drifting off topic in the other mailing list...:-) On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV The "au" is for Australia I think. "man belkinunv" states that F6C120-UNV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention

On Feb 19, 2015, at 11:23 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Almost $800 dollars and worthless > on wheezy. I am asking a few ?? over that on their mailing list as it > worked perfectly on ubuntu-10.04.4 LTS. If you still have a backup of /etc from the Ubuntu install, there might be some clues in /etc/cups about the duplex settings (or which drivers support duplex,

Greetings people; The section of drakeconf that pclos uses has two problems. First is several screens full of complaints about deprecated syntax in "/etc/udev/rules.d/70-nut-usbups.rules" at each reboot. So I pulled the current 2.5 svn trunk, then found I was missing quite a few build tools needed here that aren't used when building a kernel, currently running a 32 bit

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Greetings; I found pdf user manual which explains a few things that might help. However, for a ubuntu flavor, the various .conf etc files seem to be in /etc/nut. But this pdf says they are in /usr/local/ups/etc, and yes indeed there are some there, with the .sample files being owned by root, and the rest are user 503, whoever he may be. Are these just a sample storage in case one needs to

On Sunday 08 December 2019 21:48:03 Charles Lepple wrote: > On Dec 7, 2019, at 7:01 PM, Gene Heskett <gheskett at shentel.net> wrote: > > What driver do I now put in /etc/nut/ups.conf? hid-generic doesn't > > seem to want to talk to it, and the original name _(usbhid-ups) > > doesn't work from new mobo. Oh wait, I can't spell. But that didn't > >

On Tuesday 07 May 2019 08:38:44 am Charles Lepple wrote: > On May 7, 2019, at 5:06 AM, Gene Heskett wrote: > > New testing install(stretch) > > pulled in nut stuff from repo. > > copied old wheezy configs to /etc/nut, overwriting the resident > > files can't talk to ups, missing usbhid-ups file > > Gene, > > What do you have in /etc/nut/ups.conf? (There

Hi Charles; Had a fire on the mobo of my old server, replaced it all with about 10x the hardware. dmesg now says this: 71068.842780] usb 1-9: new full-speed USB device number 10 using xhci_hcd [71069.012577] usb 1-9: New USB device found, idVendor=051d, idProduct=0003 [71069.012579] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [71069.012579] usb 1-9: Product:

Greetings all; Is it possible to set a logging option in one of the config files so that when we have a 1 second power bump, the date is included, both in the log, and in the -wall broadcast? We apparently have a substation regulator in the process of failing, and the recycle isn't normally slow enough to reset the clocks, but it killing one of my computers w/o actually causing a reboot.