similar to: Battery test feature of APC Back-UPS RS series

Hi all, First of all, I would like to thank everyone who was involved in the development of NUT. Although it took me some time to set it up, now it appears to be working very well. Thanks for the good software! This is my success report for an APC Back-UPS RS 800: khali at mahadeva:~> upsc rs800 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25

Hello world! Please, help me :-) I have a APC RS-800 usb and it don't shutdown. I try every things but nothing: don't shutdown. Uhmmmm My actual situation: tux:/home/effem# uname -a Linux tux 2.6.26-1-686 #1 SMP Wed Aug 20 12:56:41 UTC 2008 i686 GNU/Linux tux:/home/effem# wajig policy nut nut: Installato: 2.2.2-6 Candidato: 2.2.2-6 Tabella versione: 2.2.2-7 0 -20

Hello!! I have a APC Back-UPS RS 800 and I'm using NUT v2.2.2 on a PowerPC powered NAS. With WinNut, I found the ups.load value strange, so I've done a "upsc ups" and got this results: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2007/12/28 battery.runtime: 997 battery.runtime.low: 120 battery.temperature:

Network UPS Tools version 2.2.2-pre2 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.2/testing/nut-2.2.2-pre2.tar.gz - News: http://www.networkupstools.org/source/2.2/testing/new-2.2.2-pre2.txt - ChangeLog: http://www.networkupstools.org/source/2.2/testing/ChangeLog Arnaud and the NUT team -- Linux / Unix Expert R&D -

Hello, we have a problem using APC Back-UPS CS 500 (connected via USB, usbhid-ups-apc) and UPS-NUT. We've tried different Versions of UPS-NUT (2.2.1 and 2.2.2), including the latest from SVN (28th November 2008). We've also tried apcupsd, which works fine for our requirements, but we don't want use it. What we need is simple: The UPS should turn off after power loss and shutdown

Hello, I am having a heck of a time with false low battery alarms right now.  It has been going on for the last couple of months.  I originally started getting them with a UPS that was 1-2 years old so I thought it was time to change it out and buy a new one.  I'm still getting the false alarms with the brand new one.  The status is "OL LB" which is strange to me. I have a

Dear list, I have an APC Smart-UPS 1500 hooked up via the USB port. Recently, when we had a power outage, the only entry in the logs was: Dec 3 14:43:43 afs1 upsmon[3035]: UPS apc at localhost on battery and then the machine seems to have run until the battery was empty. It only notices the "battery low" after I turn the system back on: Dec 3 16:01:39 afs1 usbhid-ups[21973]:

While working on the mge-hid subdriver, I wanted to add the 'beeper.mute' command. Unfortunately, the description I intended to use was used already by the 'beeper.off' instcmd: CMDDESC beeper.off "Temporarily mute the UPS beeper" Now of course we could add another instcmd 'beeper.reallyoff', but instead I would prefer to bite the buller and do the following:

Thanks again, Great to see confirmations of more and more things working! > I wonder what's the fastest method to test the function (previously I setup the ups and unplug the utility from the ups for testing). > is "upsrw driver.flag.allow_killpower=1" then "upscmd driver.killpower" the correct testing procedure? At least by intent of this new feature -- yes.

Thanks again, Great to see confirmations of more and more things working! > I wonder what's the fastest method to test the function (previously I setup the ups and unplug the utility from the ups for testing). > is "upsrw driver.flag.allow_killpower=1" then "upscmd driver.killpower" the correct testing procedure? At least by intent of this new feature -- yes.

I got around to unplugging my UPS and I found it doesn't last nearly as long as estimated. Is the "upsmon[1446]: UPS desktop_ups at localhost battery is low" logged when "battery.runtime:" = "battery.runtime.low: 120"? Does any make better batteries that don't go down faster when they get old? battery.charge: 100 battery.charge.low: 10

On 12/03/2016 10:35 AM, Charles Lepple wrote: > On Dec 3, 2016, at 11:16 AM, Jack McGee <jack at greendesk.net> wrote: >> Dec 3 08:38:16 amethi upsd[18234]: not listening on ::1 port 3493 >> Dec 3 08:38:16 amethi upsd[18234]: listening on 127.0.0.1 port 3493 >> Dec 3 08:38:16 amethi upsd[18234]: no listening interface available > I can't say I fully understand

CyberPower Systems PR6000LCDRTXL5U http://www.cyberpowersystems.com/products/ups-systems/smart-app-ups/pp-series/PR6000LCDRTXL5U.html I had to create the following udev rule (on RHEL6): ATTR{idVendor}=="0764", ATTR{idProduct}=="0601", MODE="664", GROUP="dialout" Shutdown testing successful. UPS comes back online after turning off. # upsc battery.charge:

On Jul 26, 2014, at 9:58 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can mute the beeper temporarily (and this works) but that most UPSs do not allow you to permanently turn it off (I tried using upsrw but it said beeper.status was read only). Can you send the variable list

On Jan 1, 2019, at 7:06 PM, Stuart D. Gathman wrote: > > On Tue, 1 Jan 2019, Stuart D. Gathman wrote: > >> Our server has 2 UPS on 2 PSUs. At 8am, someone unplugged one UPS. At >> 8:10, they plugged it back in, but turned off the load - presumably to stop >> the beeping. >> So the system is still up on 1 PSU, and can talk to both UPS. Can't I turn

> Also, I don't think we have any confirmation of the variables that the AP9620 provides. Here is the list of full 'upsc' output for various APC models: > > http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/index.html Frantz, Actually, it would be useful if you could send a copy of the output of 'upsc', 'upscmd -l' and

I have a brand new Eaton 5E UPS purchased in Australia. Details: Eaton 5E Model: 5E650iUSB-AU Date: best I can find is the shipping date to supplier on box label - May 2014 OS: Ubuntu 14.04 Server edition Nut 2.7.1 Installed via apt-get install nut I have two problems I would like to fix. First the beeper is annoying and loud and I worry it will wake everyone up at night. I read that you can

On Nov 8, 2014, at 6:12 PM, Selva Nair <selva.nair at gmail.com> wrote: > Everything works rather well, except that the cgi-interface does not report input/output voltages and load for the C 1500 unit. > upsc also reports these values only for model 1000, not for 1500. Battery charge is and runtime are reported. For the 1000, do the values match this page?

Hi all, I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. Since on all my work I figure out the following: from Network UPS Tools upscmd 2.4.1 [~] # upscmd -l qnapups Instant commands supported on UPS [qnapups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use

Jim Klimov <jimklimov+nut at gmail.com> > > I believe some fixes were applied to the branch since your report (most visibly, about battery time settings), are you in position to test how it behaves now? :) Hi: I got another ups for testing. so I test the new commit for both APC SRT3000XL and SMT2200RM2U. the results below: 1. I get the new attribute "ups.test.result" for