similar to: megaline 5000, battery charge

[apparently the list didn't get the message, probably because it exceeds the 40kb threshold, so here it is in all its glory with my reply] On Mon, 3 Sep 2018 at 14:32, Gabriele TAORMINA <gabriele.taormina at legrand.com> wrote: > > Dear Daniele, > > > "I fixed a few issues, and pushed your changes (amended) to this > > temporary branch:

> sorry for the delay, I forgot to put the automatic response (I was on holiday), here's a description of what we made and the drivers we used to start from: No problem for the delay... I fixed a few issues, and pushed your changes (amended) to this temporary branch: https://github.com/zykh/nut/tree/issue-441+legrand Let me know if I misunderstood anything... > - usbhid-ups --> we

Dear Daniele, nice to meet you, I'm a collegue of Gabriele. The problem with "blazer_usb" driver ("blazer_ser" works correctly) is related to the following commands: - "F" and "I": when the KRAULER subdriver check these UPS answers it uses wrong constants to check the lenght of the received packets, so these commands are considered as "not

[forwarded without attachments, for real this time] > Begin forwarded message: > > From: Gabriele TAORMINA <gabriele.taormina at legrand.com <mailto:gabriele.taormina at legrand.com>> > Subject: Re: [Nut-upsdev] Adding drivers to NUT? > Date: August 27, 2018 at 6:03:55 AM EDT > To: Daniele Pezzini <hyouko at gmail.com <mailto:hyouko at gmail.com>> >

While reviewing Greg Woods' PATCH 28/36, I realized that our namespace use "peakcurrent". A more coherent name would be "current.peak", as used in Greg's patch (well, in the metasys driver to be precise). For the time being, only the upscode2 driver is using "peakcurrent". But as told, metasys is already using "current.peak". So I'm going to

On Dec 17, 2014, at 6:58 AM, ??????? ??????? <freemgm at gmail.com> wrote: > OS version: FreeBSD 8.4-RELEASE-p19 > NUT version: nut-2.7.2_6 > NUT installation method: from freebsd pkg system > Device info: EATON 9SX 5000i, manufacturing date: 05.09.2014 > ups.firmware: 9SX5Ki ... > there're lot of data in output, if it needed i can attach in file... Not sure why it

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

Le 05/07/2017 ? 13:09, Duncan Murdoch a ?crit : > On 05/07/2017 5:26 AM, January W. wrote: >> I tried the newest patch, but it does not seem to work for me (on >> Linux). Despite the check in Rconn_printf, the write.csv happily writes >> to /dev/full and does not report an error. When I added a printf("%d\n", >> res); to the Rconn_printf() definition, I see

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > >> a friend gave me an old apc smart-ups 1250

19.12.2014 05:40, Charles Lepple ?????: > /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -x explore 2>&1 | tee /tmp/eaton9sx-explore.log After run, output: 0.000000 debug level is '2' 0.000665 upsdrv_initups... 0.000675 must specify "vendorid" when using "explore" Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >> What would log it? > > The driver. OK. >> I could try running the driver with debugging and see if that shows anything of interest. > > That should help. Unfortunately for non-debug operation, it appears that most of the usbhid-ups instcmd messages are buried at debug level 3 or 5. That

Suggestions? ----- Forwarded Message ---- From: James Tucker <jt at ra66i.co.uk> To: djberg96 at yahoo.com Sent: Thursday, October 19, 2006 7:28:30 AM Subject: Win32 OVERLAPPING IO Hi Daniel, My name is James Tucker, I''ve been hacking in Ruby for only a few months now, however am an experienced general programmer in a wide variety of languages. My current focus is on a new

I installed Board Master a software that control a CNC machine to produce PCB (Printed Circuit Board). The software install flawlessly but to check if it works I need RS232 working to control CNC machine. I tried to set connection parameters in Board Master choosing COM1 (the only available) but CNC machine don't move and software keep asking for switching machine on. Of course software and

Hello Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the trick is that I am using a raspberry pi, it does not have RS232 so I connected a keyspan RS232 to USB adapter, but so far I can?t make this work. Thanks for your time to read this. -Edgar -------------- next part -------------- An HTML attachment was scrubbed... URL:

OS version: FreeBSD 8.4-RELEASE-p19 NUT version: nut-2.7.2_6 NUT installation method: from freebsd pkg system Device info: EATON 9SX 5000i, manufacturing date: 05.09.2014 ups.firmware: 9SX5Ki When i try to see battery charge, in output it have not such variable, and i can't control my server and other clients connected to them. Any options cannot power of server. How to see current battery

Hi there Does any one of you know something about R and an implemented RS232-Interface? Are there any packages? Or is it possible to write an extensions or something like that in C/C++ ? The problem is that i should handle the information from a measuring device via the RS232-Interface (probably you know LabVIEW, which provides this functionality). These informations should then directly be

On May 28, 2014, at 8:59 PM, Daniel O'Connor wrote: > On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >>> What would log it? >> >> The driver. > > OK. > >>> I could try running the driver with debugging and see if that shows anything of interest. >> >> That should help. Unfortunately for non-debug

Hello list! I can't seem to get this running via RS232 monitoring; I've been told that NUT won't support serial connections, and find this hard to verify. Does anyone else have this running on the SU10KRT3U via RS232? If so, what driver did you use? I'm getting no satisfaction from the "tripplite" driver; upon upsdrvctl start, I get "Failed to find UPS - giving

Hello, first of all I'd like to thank all the NUT developers for their gorgeous work and for their efforts to make NUT the best and most complete UPS management software I've ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same