similar to: No subject

Carlos, Today I was browsing through the NUT Tracker and noticed an entry which linked to a message on nut-upsdev: http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-January/000559.html Although the fentonups driver is no longer in the tree (since it was replaced by the megatec driver), I think there is still some merit in this patch. Notice the following lines from this message: >

Good day! I'm struggling to connect by Advice Partner PRPC650 UPS to Nut. The UPS uses USB for communication and the current problem is that serial device (/dev/ttyUSB*) is not detected. OS is Debian Lenny (same behavior on Ubuntu Hardy). Did anyone have any success with this UPS? Here is what my dmesg and udevmonitor say (on Debian): dmesg: usb 2-3: new low speed USB device using ohci_hcd

Hi there First a big thank you to all nut developers. I tried the 2.0.4 as well as the 2.0.5-pre1 versions with my CyberPower OP1000E connected to a serial to USB converter. All I got was the following: # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5-pre1 Network UPS Tools - CyberPower text protocol UPS driver .05 (2.0.5-pre1) Warning: This is an

Citeren Arnaud Quette <aquette.dev at gmail.com>: > Author: keyson-guest > Date: Wed Feb 4 15:03:36 2009 > New Revision: 1765 > > Log: > - Added mocrodowell.c/h into drivers/. add man/microdowell.8. Adjusted > drivers/Makefile.am and man/makefile.am. Adjusted the code for 2.4.0 in the > microdowell.c. Besides the things already mentioned by others and the obvious

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

I have the following situation: file2 on remote host and file1 on localhost. file1 and file2 are mostly the same. Simply running rsync remotehost:file2 file2 will actually transfer the entire file. But I would like to use the factt that I have local file1 that is mostly similar to file2. I.e. how can I make rsync to use file1 as a reference while transferring file2? (cp file1 file2 locally and

Hi Shanan, Since I'm lagging too much on this point, I've forwarded your mail to the NUT development list, in the hope that another developer will have a bit of time to merge your patch. thanks for your contribution, Arnaud Quette -- Free Software Developer - http://arnaud.quette.free.fr/ Debian Developer - http://people.debian.org/~aquette/ Network UPS Tools (NUT) Project Leader -

Hi all, could someone tell me what this does mean "bad file descriptor" when trying to start asterisk. It goes till the CLI command and then die with this message. Below an strace output from asterisk -vvvvvvvvvc It's on debian Sarge kernel 2.6.7 with packages from debian VoIP team. The server was running fine till now with this version. Thanks

Best fortress support was understandably dropped, but we still use them, and someone else may want the driver I ported to nut-2.0. We also often attach the serial cable from a UPS to a network terminal server, since servers these days don't come with very many serial ports. (They call them "legacy" ports.) I submitted a patch to support these for nut-1.x, and it was rejected

> This means there was an error (some function returned -1), but the > error message was not set. Could you capture the backtrace when this > happens? It's hard to find the exact point, but going function and > checking what returns -1 should do. Assuming by "backtrace" you mean the strace output, I went to the end of the file, and then did a reverse search for -1; here

Hi list, I have 3 Citrix Xenserver 5.6  and currently building a a VM backup server. I took the xe client on one of the server and installed it on the backup server (gentoo based) installed the stunnel package to make XE work. now when running, I get this error message : [server ­~ #] ./xe help -debug -s 192.168.111.17 -u user -pw pass Connecting via stunnel to [192.168.111.17] port [443]

Hi! Normally nut was just worked and worked for me! Not this time though! Distro is Gentoo withe latest nut-2.6.0 emerged today. Linux kernel version is 2.6.36 UPS is PowerCom BNT2000AT "Driver" is powercom ups.conf looks like this! Okay so APC1 is not and APC! [APC1] driver = powercom type = BNT port = /dev/ttyS1 numOfBytesFromUPS = 16

Hi All, I'm trying to shutdown my UPS using NUT driver version upsdrvctl -V Network UPS Tools - UPS driver controller* 1.01-906.* My UPS details are the following : battery.charge: 100 battery.charge.low: 5 battery.charge.warning: 50 battery.runtime: 22980 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 26.8 battery.voltage.nominal: 24.0 *device.mfr: American Power Conversion*

Hello, I am running a server with cifs-utils 6.0 on Ubuntu 14.04 trusty with a CIFS mount as follows: //server/share /mnt/Share cifs rw,relatime,vers=1.0,cache=strict,username=myuser,domain=EXAMPLE,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.8,unix,posixpaths,serverino,acl,rsize=1048576,wsize=65536,actimeo=1 0 0 I am using perl's File::Copy function to copy several hundred files from

On Tue, Jun 09, 2015 at 10:40:18AM -0500, Andrew Martin wrote: > Hello, > > I am running a server with cifs-utils 6.0 on Ubuntu 14.04 trusty with a CIFS > mount as follows: > //server/share /mnt/Share cifs >

Hi! Normally nut was just worked and worked for me! Not this time though! Distro is Gentoo withe latest nut-2.6.0 emerged today. Linux kernel version is 2.6.36 UPS is PowerCom BNT2000AT "Driver" is powercom ups.conf looks like this! Okay so APC1 is not and APC! [APC1] driver = powercom type = BNT port = /dev/ttyS1 numOfBytesFromUPS = 16

https://bugzilla.mindrot.org/show_bug.cgi?id=1445 --- Comment #1 from qianliguo <qianliguo2002 at 163.com> 2008-02-28 13:56:17 --- # strace ssh execve("/usr/bin/ssh", ["ssh"], [/* 16 vars */]) = 0 mmap2(NULL, 20, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40005000 stat("/etc/ld.so.cache", {st_mode=S_IFREG|0644, st_size=1796, ...}) = 0

https://bugzilla.samba.org/show_bug.cgi?id=4327 Summary: Sudden rsync errors Product: rsync Version: 2.6.8 Platform: All URL: http://www.ercbroadband.org OS/Version: Windows XP Status: NEW Severity: normal Priority: P3 Component: core AssignedTo: wayned@samba.org ReportedBy:

Hi; I meet some problem when porting openssh.Please help me The following content is wrong info: # strace ssh execve("/usr/bin/ssh", ["ssh"], [/* 16 vars */]) = 0 mmap2(NULL, 20, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40005000 stat("/etc/ld.so.cache", {st_mode=S_IFREG|0644, st_size=1796, ...}) = 0 open("/etc/ld.so.cache",

This code, added to drivers/genericups.h, supports the CyberPower SL series UPSes. I've tested with my 725SL - the online/on battery transition, and low battery status, and finally the shutdown signal all work as expected. *** genericups.h.orig Sun Nov 2 16:54:24 2003 --- genericups.h Mon Oct 3 13:49:00 2005 *************** *** 220,225 **** --- 220,234 ---- TIOCM_ST