similar to: APC Back-UPS CS 500 power cycle

Hello world! Please, help me :-) I have a APC RS-800 usb and it don't shutdown. I try every things but nothing: don't shutdown. Uhmmmm My actual situation: tux:/home/effem# uname -a Linux tux 2.6.26-1-686 #1 SMP Wed Aug 20 12:56:41 UTC 2008 i686 GNU/Linux tux:/home/effem# wajig policy nut nut: Installato: 2.2.2-6 Candidato: 2.2.2-6 Tabella versione: 2.2.2-7 0 -20

While working on the mge-hid subdriver, I wanted to add the 'beeper.mute' command. Unfortunately, the description I intended to use was used already by the 'beeper.off' instcmd: CMDDESC beeper.off "Temporarily mute the UPS beeper" Now of course we could add another instcmd 'beeper.reallyoff', but instead I would prefer to bite the buller and do the following:

On Wed, 14 Oct 2015, Davide Baldini wrote: > upsdrvctl shutdown > ... > instcmd(shutdown.return, [NULL]) > instcmd: FAILED > Shutdown failed! > Driver failed to start (exit status=1) > > This time /var/log/syslog doesn't register anything about the UPS after > issuing the command above. Instead, It logged some errors after a > upscmd -u admin -p mypass

Hello, I want to poll ups information (status, load, temprature etc.) from a Linux server with snmp. The ups is connected with a serial cable and I'm using nut. It is possible to transfer Information from ups nut to the linux smnpd (with some scripts?) and to make some extention to the mib database. I know, my question is not ups nut related. Mit freundlichen Gr??en / Best regards Markus

Thanks for your help. From: Charles Lepple <clepple at gmail.com> Date: Mon, 18 Dec 2017 19:26:56 -0500 This may sound like an apples-to-oranges comparison, but we did uncover an issue with CyberPower UPSes where the delay values needed to be greater than or equal to 60 (seconds), since they were being rounded down to integer numbers of minutes internally: What was the largest

When running 'sudo upsmon -c fsd' UPS turns off then back on after a delay as expected. But when power is disconnected and the command is ran, the UPS turns off but still turns back on again. Changing 'ondelay' to -1 or 0 does not change the behavior. How can I get the UPS load to stay turned off if there is no power? Or am I misunderstanding how to test this functionality?

Hello. Not listed as supported, so here is some info, [root at vhost ~]# /usr/sbin/usbhid-ups -DD -a powercom Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.001318 upsdrv_initups... 0.074753 Checking device (0529/0001) (003/002) 0.074835 Failed to open device, skipping. (Permission denied)

http://www.zigor.com/uk/index.php/en/products/upssystems/danubioseries Ships with UPSilon 2000 software, and appears to work with blazer_usb to a certain extent with the following config: [danubio] driver = blazer_usb langid_fix = 0x409 port = stupidly, I seem to have to set this even though it's ignored vendorid=0001 productid=0000 Yes, vendor 0001,

On 10/14/2015 12:18 PM, Roger Price wrote: > Is there any command in the list provided by "upscmd -l myups" which is accepted > by this UPS? None of the command sin the list successfully completes, not even beeper.toggle. My list: # upscmd -l myups Instant commands supported on UPS [myups]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load

Hi I am considering adding support in the bcmxcp driver for the following commands available in bcmxcp specification : #define PW_UPS_ON .. /* UPS on command. length 1-2 */ #define PW_UPS_ON_TIME .. /* Scheduled UPS on in n minutes. length 3-4 */ #define PW_UPS_ON_AT_TIME .. /* Schedule UPS on at specified date and time. length 7-8 */ #define

Hi Folks, I'm trying to use a ZIGOR Danubio 2000 ups with NUT on Debian squeeze (AMD64). OS/NUT are all the latest official release (as of last week) with NUT installed from packages. As the usb descriptor presents MEC (and the Fry's electronics) I chose to use the blazer_usb driver. All appears to work well excepting that the UPS does not appear to accept the shutdown instcmd to turn

On Dec 20, 2017, at 10:32 AM, Ken Olum wrote: > > 0.090564 find_nut_info: unknown info type: load.on.delay > 0.090577 find_nut_info: unknown info type: load.on.delay > 0.090585 Initiating UPS shutdown > 0.090593 upsdrv_shutdown... > 0.090601 instcmd(shutdown.return, [NULL]) > 0.090614 find_nut_info: unknown info type: shutdown.return > 0.090624

Hi Daniele, I finally got a Best Power Patriot Pro II fixed up with a new battery and cable, and tried it with nutdrv_qx (since it uses a variant of the Q1 protocol). It auto-detected the use of Q1. It looks like things mostly work: bestups: battery.charge: 100.0 battery.voltage: 13.9 battery.voltage.nominal: 12 device.mfr: Best Power device.model: Patriot Pro II 400 device.type: ups

Hello list, first of all, I'd like to report that my UPS N-Power MEV-3000LT (http://www.380v.ru/catalogue/micro-ups/mega-vision , in Russian), which is not in the hardware compatibility list, is mostly supported by the blazer_ser driver. I have very strong grounds to believe that this (and other) N-Power UPS'es are rebranded for Russian and Italian markets from their counterparts

Hi Peter, I've forwarded your mail to upsdev as it will be of interest for several people that are working on it. As I'm also on vacation (again) for a week and 1/2 as of this evening, I don't think I'll have the time for it before I get back.... I've not yet audited the patches, but these are queued on the Alioth tracker:

Hello, Got PowerCOM BNT-1000AP, usb id 0d9f:00a6, firmware FW4.A6 nut 2.4.3 on debian stable shows only two instant commands: beeper.toggle - Toggle the UPS beeper -- not working test.battery.start.quick - Start a quick battery test -- works ok. No load and shutdown commands. Trying svn trunk version, with the same results. Debug output shows the problem: 0.035558

> I finally got a Best Power Patriot Pro II fixed up with a new battery and cable, and tried it with nutdrv_qx (since it uses a variant of the Q1 protocol). It auto-detected the use of Q1. > > It looks like things mostly work: Nice, merging bestups.c into nutdrv_qx has been on my todo list for a while, let's see how far we can get. > 1) The bestups driver uses an "ID"

Hi all, I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. Since on all my work I figure out the following: from Network UPS Tools upscmd 2.4.1 [~] # upscmd -l qnapups Instant commands supported on UPS [qnapups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use

Hello, my Atlantis UPS (model on "subject" line) fails to cycle off the outlet power after a power failure on the mains followed by an automatic shutdown of the computer. The UPS simply remains always on, preventing the computer from restarting. ** Setup: ** Nut version 2.7.2 Nut driver blazer_usb Linux 4.1.1 The config files are pretty default; the peculiar customization is