similar to: [Bug 278495] Re: megatec_usb does'nt detect ups

2008/10/27 Chuck Short <chuck.short at canonical.com>: > Arnaud, > > Any thought about this? Its a regression from 2.2.1. not yet! @Alex: any idea on your side (change of the default driver or something alike) this seems to be a timing or reading problem according to the "short read" msg Artin, can you also post the debug drivers's output of 2.2.1 for comparing? --

Hello, I'm working on getting nut using a Powermust Office 650 USB USV. Using today's trunk megatec_usb detects its vendorid 0665 productid 5161 but uses the agiler driver for it which apparently does not work (timeout...). I think this device is using that USB-to-serial chip but a different protocol behind. I got the phoenix subdriver working with the device but I had to extend

Hi mates, I've just installed camstudio on wine 1.2 without any problem. As a known issue, after trying to run for the first time, it complained a missing dll (mfc42.dll). That was easy to solve and I got camstudio opening the recorder. The problem started where, when I click on record. It says: Error creating avi file! I tryed so many things but the problem I found was the compressors

Hello all: I have a Yukai PowerMust 1000 USB and it used to work on another computer using megatec_usb driver. Now, I have it in a new computer, but the driver does not detect it. It is there: # lsusb|grep Cypress Bus 006 Device 007: ID 0665:5161 Cypress Semiconductor USB to Serial Permissions are OK: # ls -l /dev/bus/usb/006/007 crw-rw-r-- 1 root nut 189, 646 ago 8 01:51

Hi All, Actually, I installed Dovecot on an OpenBSD server, however, after properly setting (assumed) the confs, Dovecot does'nt start. I don't know the reason but don't know how to debug. Where is the log about reason for not starting ? Thank you for helping. Regards

Hi: Iam using astcc on my asterisk server,sometimes astcc does'nt count calls by not writing them into mysql ,example: Not subtracting the call cost from the face value of the entered card number and by not writing it into cdrs table.This problem occured sometimes and not always. Is it possible that this problem occured due to launching mysql by this command : /etc/init.d/mysqld start --force

http://bugs.freedesktop.org/show_bug.cgi?id=27152 Summary: [G72M] Screen corruption when using KMS. Dell Latitude D620 / Quadro NVS 110M/GeForce Go 7300 Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component:

How can I install Unreal Tournament under wine (20010510)? When I tried it, I got following message after all files were copied: >err:psdrv:PSDRV_FindPrinterInfo Error 2 getting PPD file name for >printer 'Printer1 auto' >fixme:winspool:AddPrinterW DocumentProperties fails >verr:psdrv:PSDRV_FindPrinterInfo Error 2 getting PPD file name for >printer 'Printer1

Hi all, I'm using Postfix + Dovecot with system users (/etc/passwd and NIS) + deliver + cmusieve; Here are some relevant lines in conf files : /etc/postfix/main.cf ... mailbox_command = /usr/lib/dovecot/deliver ... /etc/dovecot/dovecot.conf ... protocol lda { postmaster_address = postmaster at lri.fr mail_plugins = cmusieve deliver_log_format = msig=%m :

http://bugs.freedesktop.org/show_bug.cgi?id=27076 Summary: [C51/6100 GO] Image corruption / broken Xv Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

http://bugs.freedesktop.org/show_bug.cgi?id=27153 Summary: [NV18] Frequent lockups during graphical activities Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

after I starting battery test on my laptop I see in my logs some error and ups (IPPON Smart Power Pro 1400. usb interface) isn't monitoring now [ippon] driver = megatec_usb port = auto desc = "local" Feb 16 23:22:09 f37 upsd[17150]: Instant command: stlk at 127.0.0.1 did test.battery.start on ippon Feb 16 23:22:12 f37 megatec_usb[17249]: ser_get_line: Device detached? (error

ut 2.4.1 works with megatec_usb driver. It tries to interact with a device in /dev/bus/usb/X/Y, but there are root:root 664 access rights. When I try to set port /dev/hiddev0 with write access in config file, in strace there are no records about accessing /dev/hiddev, but still only /dev/bus/usb/X/Y How to explain such a behavior? execve("./megatec_usb",

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Folks, I think the present megatec_usb.c deserves to be renamed to serial_usb.c. I think it potentially could serve many more UPS'es with built-in USB-to-serial converters, not limited to the megatec_usb driver (although that was the first one to use this). I also think a more layered approach would be nice, in the same fashion as the usbhid-ups driver with subdrivers. Which would mean that

Hi Heinz, 2010/5/30 heinz > Thank you for your nut-2.4.3 system. I had big troubles getting it to work > with the UPSONIC PROFFICE 650 UPS in USB mode. > > I had to rewrite the get_data_phoenix() function in drivers/megatec_usb.c > file. > It now appears to be working correctly. I have attached the source of the > modified function in case you might want to add it to a

Citeren Roman Mamedov <roman at rm.pp.ru>: >> Another useful thing would be to run the bundled driver on a Windows >> box while running 'usbsnoop' so that we can get an idea what it is >> doing. Maybe we're missing something here. I still would like to see that. > Keep in mind that the patched megatec_usb driver (which I use since > yesterday) can

FYI @Arjen: anything else required? cheers, Arnaud ---------- Forwarded message ---------- From: MichaelE <662435 at bugs.launchpad.net> Date: 2010/10/20 Subject: [Bug 662435] Re: megatec_usb driver stopped working after upgrade from 8.04 to 10.04 To: aquette.dev at gmail.com I tested the shutdown behaviour and it works as expected. The UPS disconnected the load and then came back on