similar to: Kebo 1200D, Infosec XP Pro 1000

Hello nut-upsuser, Hope, that its might be useful for someone: 1. Kebo UPS-600A Driver: genericups UPStype: 7 Config extras: SD = -RTS or SD = -TX (don't know why but both are suitable) 2. Kebo UPS-1200M Driver: fentonups Config extras: none Note: Looks like twin brother of Microlab UPS-1200M :) Driver ask me to report ID string: "Unknown

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

Hi, As it has been brought to my attention (by several parties), my current MB does not support VT-d. Since I don''t feel like purchasing a brand new system, I have searched for replacement MB-s that would fit into my existing uATX case, support my C2D CPU, and support at least 4x2GB ram. I have narrowed it down to the following four models: SUPERMICRO MBD-C2SBM-Q-O (Q35 chipset)

Now that FLAC has officionally joined the Xiph family, there are three different free audio codecs, which can be stored/transported using the ogg container. Would it be possible to create an API and/or a library that would cover them all? If my understanding of the situation is correct, if an application wants to support vorbis, speex and flac, it has to use three different interfaces.

Now that FLAC has officionally joined the Xiph family, there are three different free audio codecs, which can be stored/transported using the ogg container. Would it be possible to create an API and/or a library that would cover them all? If my understanding of the situation is correct, if an application wants to support vorbis, speex and flac, it has to use three different interfaces.

Now that FLAC has officionally joined the Xiph family, there are three different free audio codecs, which can be stored/transported using the ogg container. Would it be possible to create an API and/or a library that would cover them all? If my understanding of the situation is correct, if an application wants to support vorbis, speex and flac, it has to use three different interfaces.

Ubuntu 8.04 Nut : Version: 2.2.1-2.1ubuntu7.2 Hello, I choose the megatec driver and I connect through a serial cable. I receive a "This UPS has an unsupported combination of battery voltage/number of batteries" message. I know this is not an error but I don't really what I have to do next. Here is the result of /lib/nut/megatec -a infosec -DDD debug level is '3'

Hi there! My problem is the following: I am experimenting with virtualization with XEN. I am running WinXP in a HVM host with a Debian Gnu/Linux (Etch) dom0. I am also using audio emulation (sb16). This way, sounds from WinXP work fine. And here comes the problem: The HVM guest completely reserves the audio device; other software can not use it. (mplayer says this: alsa-init: using ALSA

2003-01-28, k keltezéssel tìpán Bro ezt írta: > Hello Csillag, > Yes, you are right :). That's the Vorbis default. Try out these > options: maximum-bitrate, minimal-bitrate and quality. You can set > things up. If you set the "managed" flag, the bitrate is more > respected, but the quality may be (and actually is) lower. Yeah, I've already done that. (I consider

Hi, I have read your message about building a VirtualGL server in a xen domU at http://www.mail-archive.com/virtualgl-users@lists.sourceforge.net/msg00088.html . I plan to do exactly the same. Could you please share some of your experience? What HW have you chosen? Have you succeeded? According to the information at http://wiki.xensource.com/xenwiki/XenVGAPassthroughTestedAdapters ,

Hi all, I would like to get my system to work with IOMMU. (The long-term goal is VGA passthru.) System is as follows: CPU: Core 2 Duo E6600 MB: Foxconn G9657MA-8EKRS2H (w. latest bios: 631F1P61) Virtualization support is enabled in BIOS. (These is only one option.) Hypervisor: xen 4.0.0 from Debian, AMD64 Xen config: iommu=verbose output of xen dmesg is attached. HVM domains work (lasd tried

Here is what I imagined (just vague thoughts, nothing polished): Let's suppose we have a hypotetical library called "Free Universal Codec Kit" - ..um...well.. Frunick for short :) (Of course I am not proposing this name, I'm sure the suits in the industry would not like it...but for my example its OK ;) Now, an application should do something like this: #include

Here is what I imagined (just vague thoughts, nothing polished): Let's suppose we have a hypotetical library called "Free Universal Codec Kit" - ..um...well.. Frunick for short :) (Of course I am not proposing this name, I'm sure the suits in the industry would not like it...but for my example its OK ;) Now, an application should do something like this: #include

Hello, I am trying to make my UPS system working with NUT but with no success. I got "No supported UPS detected" message. I use the blazer_usb driver since it was proposed to me by the web site. My NUT version is : 2.7.1 (installed from standard RPM), release 2.41 The UPS identification: INFOSEC X4 RM PLUS linux-2qya:~ # /usr/lib/ups/driver/blazer_usb -a infosec Network UPS Tools -

Hi I have an Infosec Hero touch lcd 400 USB ups but it is not recognised by Nut. I tried to use Blazer_usb too. Could you help me please ? Thank you very much! Https://www.infosec-ups.com/fr/#/dfclassic/query=Touch%20400&query_name=match_and -------------- next part -------------- An HTML attachment was scrubbed... URL:

[please cc the answers to me, because I'm not on this list!] Hi there! Yesterday I downloaded the CVS version of icecast and ices. There are several example config files provided for ices in the conf/ directory. The ices-playlist.xml specifies encoding for one of the instances: <encode> <nominal-bitrate>64000</nominal-bitrate>

On Aug 26, 2013, at 6:22 AM, James HORLEY wrote: > I've download again nut source today from "https://github.com/networkupstools/nut/tree/voltronic-driver" and try compiliing the voltronic-driver. This branch has been merged in, and will be part of 2.7.1 when it is released. > The drivers is working fine (ie computer is shutting down) except for the shutdown of the ups. >