similar to: Tripplite SMX1500XLRT2U through serial (upslog/CGI problem)

Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not

I think I'm going to have the slightly rejigger the tripplite-hid.c driver to 'properly' support all of the data I know about it's outlets. A given UPS may have 'n' output loads. I could have 5, I could have 10, I won't know until I actually ask the UPS. But in order to use the hid to nut struct, I'm actually going to have to modify that struct dynamically, or

Hello list- Anyone with Tripplite SMX1500XLRT2U (http://www.tripplite.com/EN/products/model.cfm?txtModelID=2687) successfully integrated with NUT through serial port? I'm trying to connect to SMX1500XLRT2U using serial cable shipped with UPS under FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately, it looks like it couldn't be recognized. %dmesg | grep sio sio0:

Hi list- I'm having problems with TrippLite SMX1500LCD not being detected by NUT under FreeBSD 6.3-RC2. NUT 2.2.1 was installed from ports with the following options: WITH_USB=true WITH_SNMP=true WITHOUT_IPV6=true WITH_LIBUPSCLIENT=true WITH_CGI=true I use USB cable shipped with TrippLite and 'usbdevs -v' shows the following: ... Controller /dev/usb2: addr 1: full speed, self

Hi, FINALLY got my UPS working, YEA!!!! But now it brings up even more issues.. (BOOO!!) 1) I'm thinking this is a UPS issue, but when I pull the plug on my UPS, it goes from 100 to 30 in just a short amount of time (Minutes). This causes the machine to shut down. But once it gets to 0, its beeped its little heart out for a few more HOURS providing power to the non-system items perfectly.

Linux-2.4.28 libusb-0.1.8 nut-2.6.5 [+most recent drivers from GIT] - from tarball EATON 3S700DIN [mfr.date 09/28/14] ---------------------------------- ISSUES: I) Too many kernel logs: --- In /var/log/kernel.log usbdevfs: usb_submit_urb returned -28 In /var/log/daemon.log: usbhid-ups[744]: libusb_get_interrupt: No error usbhid-ups[744]: libusb_get_interrupt: error submitting URB: No space left

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

OS version: FreeBSD 8.4-RELEASE-p19 NUT version: nut-2.7.2_6 NUT installation method: from freebsd pkg system Device info: EATON 9SX 5000i, manufacturing date: 05.09.2014 ups.firmware: 9SX5Ki When i try to see battery charge, in output it have not such variable, and i can't control my server and other clients connected to them. Any options cannot power of server. How to see current battery

Hi, I am trying to configure my Tripp Lite SU5000RT3U on Ubuntu 18.04 as I am not able to completely get all the data from the UPS. After installing all required packages from the Ubuntu repos (had to run sudo apt-get install dkms, I had to install the displaylink drivers from displaylink.org by doing sudo ./displaylink-driver-4.2.29.run, and I created a sim link by doing the following: sudo ln

Hello, we have a MGE Pulsar Evolution 800 connected to a Fedora Core5 Server using a serial cable. Installed and configured properly are RPM versions of nut-2.0.3-0.1.fc5 nut-client-2.0.3-0.1.fc5 nut-cgi-2.0.3-0.1.fc5 which all work (mostly) fine. The server is connected to outlet.0 and properly shuts down when it's loosing power after around 20 minutes. It also boots up whenever the ups

On Fri, Sep 11, 2020, at 4:05 PM, Bartosz wrote: > Dear All, > > Could you please recommend me a UPS with 100% support of the ondelay parameter and NUT compatibility? > > 850 or 1000 VA > > I have the EATON 5E850iUSBDIN UPS and it does not support this parameter so I would like to buy another UPS that for sure will support it. > > Thank you, > Bart Can you tell

Device Manufacturer: Eaton Device Name: 5S1500LCD ---------------------------------------------------------- upsc output: battery.charge: 100 battery.charge.low: 20 battery.runtime: 3515 battery.type: PbAc device.mfr: EATON device.model: Ellipse PRO 1500 device.serial: 0000000000 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Device Manufacturer: Eaton Device Name: 5S1500LCD ---------------------------------------------------------- upsc output: battery.charge: 100 battery.charge.low: 20 battery.runtime: 3515 battery.type: PbAc device.mfr: EATON device.model: Ellipse PRO 1500 device.serial: 0000000000 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

I was looking at how other drivers deal with outlet collections, and I noticed some differences between newhidups in 2.0.4 (from Debian's 2.0.4-2.3) and the SVN trunk (rev 723) on an Evolution. Full diff is below, but here are the highlights: * MGE HID 0.9 vs 1.0 * outlet.#.switch seems to have moved to the commands outlet.#.load.{on,off} Then I found this in the ChangeLog: * fix

Hello Charles, Thank you so much for your help. Just run upsc and it is possible that input.transfer.low is the one because we used power regulator to bring down the power around 84v and then the ups sent the power loss message to PC. Do you think some others may take effect for the low voltage? Just have the upsc result attached. Then I retried input.transfer.low, default.input.transfer.low,

Hey Charles, Latest update. Looks like in ups.conf I setup default.input.transfer.low = 84. After I took that line out, restart upsdrvctl, upsmon, and upsd, the command of sudo upsrw -s input.transfer.low=70 -u * -p * ups return OK. Still need to verify if it works by using voltage regulator and will keep you updated. Thank you for your help Regards Shen On Thu, Jun 5, 2014 at 8:54 AM,

Hello Nut Devs, I'm working with usbhid-ups and a Tripplite OMNI1000LCD. I used a USB packet sniffer to discover something cool about the watchdog feature in this unit. (not sure if the other OMNI-X-LCD models work the same or not.) Basically there's a single HID variable at Report ID 0x52 (UPS.OutletSystem.Outlet.ffff0092) that's one byte (0-255 int) and it contains the Watchdog

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

Hi, I have several Linux machines at home and I'm considering buying a UPS for them. I see that many models are supported by NUT (great!) but since I'm new to the UPS world I have some questions about UPS features and NUT support of them I couldn't find an answer for: 1/ are there UPS models who report/meter power usage through USB? per UPS socket or globally? 2/ are there UPS models

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I