similar to: FreeBSD usbhid-ups problem

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

Hi, folks! There is FreeBSD 7.1, NUT 2.4.1, UPS APC Smart 2200 XL. NUT is compiled from ports with following options: --------------------------------------- _OPTIONS_READ=nut-2.4.1_5 WITH_SERIAL=true WITH_USB=true WITH_SNMP=true WITHOUT_NEON=true WITHOUT_PDU=true WITHOUT_HAL=true WITHOUT_IPV6=true WITHOUT_CGI=true --------------------------------------- UPS is successfully recognized by OS

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at

Hi Please could someone assist me? I?e got a 3g usb dongle - Huawei E1552. [root@]# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus

Hi! all. I have been reading every mail and news about nut and 06da:0002 Phoenixtec but not found a solution. I have a very nice working ups from: CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" It has COM3 and USB plugs, I don't know if it needs a standar RS232 I have test with varius drivers in ups.conf [MyUPS] driver = bcmxcp_usb | usbhid-ups |

Hi Charles. I have got this output with driver usbhid-ups ups.conf [Phoenixtec] driver = usbhid-ups vendorid = 06da productid = 0002 port = auto #~ langid_fix=0x0409 desc = "CENER ONLINE 1000VA" # export USB_DEBUG=5 # ./usbhid-ups -a Phoenixtec Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '3' 0.000557

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

# export USB_DEBUG=5 # /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 0.000000 debug level is '5' 0.000426 upsdrv_initups... usb_set_debug: Setting debugging level to 5 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_busses: Found 002

Hello, I have been trying to get a TrippLite Internet Office 750 UPS to talk to my Linux PBX for a couple of evenings now and I'm getting nowhere... I tried searching the list archives before posting here (I'm sure I'm not the first one to try to get this going) but they seem to be offline... The UPS is unfortunately USB based but I thought I'd give it a try anyway. Here is

Hi, I have an MGE Ellipse UPS connected to a FreeBSD 7.0 system and it works OK to begin with but after an hour or so it dies, eg.. Starts out OK.. debug level is '2' upsdrv_initups... Checking device (0463/FFFF) (/dev/usb2//dev/ugen0) - VendorID: 0463 - ProductID: ffff - Manufacturer: MGE UPS SYSTEMS - Product: ELLIPSE - Serial Number: 000000000 - Bus: /dev/usb2 Trying to match device

Sorry about the noise guys. Below a significantly improved patch. The main difference is that all calls to usb_get_string_.. have been wrapped in a new function nut_usb_get_string()  that is implemented in libusb.c This was necessary in order to make the bufflen_fix available in libusb.c where usb_get_string() is called in libusb_open() This wrapper function mops up and hides all the work

On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote: > USB error: error sending control message: Invalid or incomplete > multibyte or wide character This is a wild guess, but what about using the option "langid_fix=0x0409"? -- Charles Lepple clepple at gmail

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

Hi Matej, I've cc'ed the developers mailing list for now... thanks for your report. Could you please send in some driver debug traces (starting it manually, using "usbhid-ups -DDDDD ...")? That would help in troubleshooting the issue. thx and cheers, Arno 2014-12-19 8:48 GMT+01:00 Matej Sekoranja <matej.sekoranja at gmail.com>: > > Update: driver is not stable. I

Arno, what version of Solaris or libusb required the interrupt pipe hack? - Charles On Dec 19, 2014, at 7:00 AM, Arnaud Quette <arnaud.quette at gmail.com> wrote: > Hi Matej, > > I've cc'ed the developers mailing list for now... > > thanks for your report. Could you please send in some driver debug traces (starting it manually, using "usbhid-ups -DDDDD

Hi, I've seen a few emails in the archives about problems polling MGE UPSs via USB under FreeBSD, but unfortunately I didn't find a solution in them that works for me. A few details about my setup.. The UPS is a MGE Nova AVR 600 connected via USB to a FreeBSD 6.2 box. I have tried both the nut port (2.0.5) and the svn trunk but have had no success yet. I am running nut as root to

Hi, I've seen a few emails in the archives about problems polling MGE UPSs via USB under FreeBSD, but unfortunately I didn't find a solution in them that works for me. A few details about my setup.. The UPS is a MGE Nova AVR 600 connected via USB to a FreeBSD 6.2 box. I have tried both the nut port (2.0.5) and the svn trunk but have had no success yet. I am running nut as root to