similar to: APC RS-800 usb not shutdown

Hello, we have a problem using APC Back-UPS CS 500 (connected via USB, usbhid-ups-apc) and UPS-NUT. We've tried different Versions of UPS-NUT (2.2.1 and 2.2.2), including the latest from SVN (28th November 2008). We've also tried apcupsd, which works fine for our requirements, but we don't want use it. What we need is simple: The UPS should turn off after power loss and shutdown

Hi all, First of all, I would like to thank everyone who was involved in the development of NUT. Although it took me some time to set it up, now it appears to be working very well. Thanks for the good software! This is my success report for an APC Back-UPS RS 800: khali at mahadeva:~> upsc rs800 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25

Thanks for your help. From: Charles Lepple <clepple at gmail.com> Date: Mon, 18 Dec 2017 19:26:56 -0500 This may sound like an apples-to-oranges comparison, but we did uncover an issue with CyberPower UPSes where the delay values needed to be greater than or equal to 60 (seconds), since they were being rounded down to integer numbers of minutes internally: What was the largest

Hi all, I use an APC Back-UPS RS 800, overall my experience with NUT is very good but there is one feature I am missing: the ability to ask the UPS for a battery test. upscmd -l shows the following commands available: $ upscmd -l rs800 Instant commands supported on UPS [rs800]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS

Hi, They say one should never argue with people that know more than you, so please bear with me. On 2013/10/24 09:47 PM, hyouko at gmail.com wrote: > The driver is expecting either 'ACK' or no reply at all in case of > success and the command itself echoed back in case of errors. > On the other hand, your UPS replies '(ACK' in case of success and > '(NAK' on

On Dec 20, 2017, at 10:32 AM, Ken Olum wrote: > > 0.090564 find_nut_info: unknown info type: load.on.delay > 0.090577 find_nut_info: unknown info type: load.on.delay > 0.090585 Initiating UPS shutdown > 0.090593 upsdrv_shutdown... > 0.090601 instcmd(shutdown.return, [NULL]) > 0.090614 find_nut_info: unknown info type: shutdown.return > 0.090624

On Jun 22, 2020, at 3:36 PM, Charles Lepple wrote: > > On Jun 22, 2020, at 1:26 PM, Gene Heskett wrote: >> >> So I just edited /etc/nut/upsd.users to add both the commands it claims >> to have but get this response to either: > > In your original example, you had multiple “instcmd =“ lines for one user- I think the allowed commands all need to be listed on one

Hello. Not listed as supported, so here is some info, [root at vhost ~]# /usr/sbin/usbhid-ups -DD -a powercom Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.001318 upsdrv_initups... 0.074753 Checking device (0529/0001) (003/002) 0.074835 Failed to open device, skipping. (Permission denied)

Hello!! I have a APC Back-UPS RS 800 and I'm using NUT v2.2.2 on a PowerPC powered NAS. With WinNut, I found the ups.load value strange, so I've done a "upsc ups" and got this results: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2007/12/28 battery.runtime: 997 battery.runtime.low: 120 battery.temperature:

Hi, There seems to be a problem turning of the inverter on a Mecer online 1000VA UPS. OS: Debian Wheezy Nut: Installed via apt - version 2.6.4-2.3 Debug output from driver. root at proxmox1:~# /lib/nut/blazer_usb -DDDDD -a mecer -k Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000 send_to_all: SETINFO driver.parameter.port "auto" 0.000023

On Monday 22 June 2020 15:36:21 Charles Lepple wrote: > On Jun 22, 2020, at 1:26 PM, Gene Heskett wrote: > > So I just edited /etc/nut/upsd.users to add both the commands it > > claims to have but get this response to either: > > In your original example, you had multiple “instcmd =“ lines for one > user- I think the allowed commands all need to be listed on one >

Hi Johan, The driver is expecting either 'ACK' or no reply at all in case of success and the command itself echoed back in case of errors. On the other hand, your UPS replies '(ACK' in case of success and '(NAK' on failure. So.. when the driver first tries to stop pending shutdowns and you get the 'operation not permitted' error, the driver interprets it as a

I used strace and the result is bus is busy: clock_gettime(CLOCK_MONOTONIC, {8158, 708518222}) = 0 timerfd_settime(11, TFD_TIMER_ABSTIME, {it_interval={0, 0}, it_value={8159, 708518000}}, NULL) = 0 ioctl(12, USBDEVFS_SUBMITURB, 0x40810) = 0 poll([{fd=7, events=POLLIN}, {fd=9, events=POLLIN}, {fd=11, events=POLLIN}, {fd=12, events=POLLOUT}], 4, 60000) = 1 ([{fd=12, revents=POLLOUT}]) ioctl(12,

On Monday 22 June 2020 18:50:25 Gene Heskett wrote: > On Monday 22 June 2020 18:03:16 Charles Lepple wrote: > > On Jun 22, 2020, at 3:36 PM, Charles Lepple wrote: > > > On Jun 22, 2020, at 1:26 PM, Gene Heskett wrote: > > >> So I just edited /etc/nut/upsd.users to add both the commands it > > >> claims to have but get this response to either: > >

Hi Folks, I'm trying to use a ZIGOR Danubio 2000 ups with NUT on Debian squeeze (AMD64). OS/NUT are all the latest official release (as of last week) with NUT installed from packages. As the usb descriptor presents MEC (and the Fry's electronics) I chose to use the blazer_usb driver. All appears to work well excepting that the UPS does not appear to accept the shutdown instcmd to turn

On Wed, 14 Oct 2015, Davide Baldini wrote: > upsdrvctl shutdown > ... > instcmd(shutdown.return, [NULL]) > instcmd: FAILED > Shutdown failed! > Driver failed to start (exit status=1) > > This time /var/log/syslog doesn't register anything about the UPS after > issuing the command above. Instead, It logged some errors after a > upscmd -u admin -p mypass

While working on the mge-hid subdriver, I wanted to add the 'beeper.mute' command. Unfortunately, the description I intended to use was used already by the 'beeper.off' instcmd: CMDDESC beeper.off "Temporarily mute the UPS beeper" Now of course we could add another instcmd 'beeper.reallyoff', but instead I would prefer to bite the buller and do the following:

I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own /lib/systemd/system-shutdown/nutshutdown, but now everything is working except for powering on and off the UPS. Regardless of the settings of offdelay and ondelay in upsconf, and regardless of whether the AC power is on, when I say "upsdrvctl shutdown" the UPS

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there! I don't know if you are able to help me. Have tried almost everything at this point.. I recently switched from a BlueWalker(Powerwalker?) PW UPS VI2000 LCD 2000VA offline UPS to a BlueWalker(Powerwalker?) PW UPS VFI 1500 LCD 1500VA Online UPS. Seems like the driver is accepting both, however, the shutdown command wont work. And this