similar to: Unitek Alpha 650 ipE

Hello to all list members, I'm trying to make my UPS work with nut-2.2.2 (using Debian Testing, but compiled from source code) for a week ago, with not success. It's a Unitek Alpha 1000Ps, and I supossed it would work with megatec_usb driver, as other Unitek models. It has an USB interface, and when I plug it into my system I've got this message: chopito:/home/jordi# dmesg | tail

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi, I'm new to NUT. I've installed Fedora 8 and NUt along with it. I'm now having a go at getting my Unitek Alpha 1200sx UPS to work and shutdown the box automatically. I know this isn't officially supported but I'm trying my luck... I've seen that other Unitek UPSs use the 'megatec' driver however I'm unsure whether this will do the trick. My UPS comes with a

Hello I've got an Unitek UPS (650ipE) that use megatec driver ... I'm running Ubuntu 7.04 with a 2.6.20 kernel and nut 2.0.5-1 package Ubuntu by default use Udev and "hid", "usbhid", "evdev" kernel modules are loaded automatically The UPS is detected on system level but "upsdrvctl" can't access to the device ... Does anyone could give

Hi, Just a quick message to say thanks for this great piece of software. Is it possible to add the Unitek Alpha 500 isx to the list of working UPS? I have tried it this afternoon on one of our machines and it is detected allright using the megatec_usb driver. It worked on Ubuntu Server "Hardy Heron" 8.04.1 using nut v. 2.2.1-2.1ubuntu7.2 Cheers, Mathieu

UNITEK Alpha650ipF and Alpha650ipE Build NUT v2.6.4 from sources http://www.networkupstools.org/source/2.6/nut-2.6.4.tar.gz System: RedHat Linux RHEL4 Kernel: 2.6.9-42.0.10.EL (upsc) command output : battery.charge: 100 battery.voltage: 14.30 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: UNITEK device.model: Alph650ipF device.type: ups

I've just acquired a Unitek ALPHA 1200 Sx UPS to replace an older serial UPS that's been working well with NUT for years. Could anyone with a Unitek tell me what the pinout on the 10P10C plug is so I can make up a cable? Thanks.

I recently took over maintenance of a linux computer which is drawing power from a "Maruson Power Net 1500" UPS. However, there is currently no monitoring or control of the UPS by this (or any other) computer. Can nut control this device? There are serial, usb, and EPO connectors on the back of the unit. (There may be a manual but I'm going to have to hunt for it.) Thanks, David

Hi! I've (finally) decided to try and make my PowerWalker work with megatec_usb. So far it seems the agiler subdriver is the way to go, but it doesn't work. The initial detection process sometimes succeeds in 1 out of 5 "Q1" commands, but that's about it (which is better than what the krauler subdriver can do... absolutely nothing). So, what needs to be done to obtain more

Hi Alexander, thanks for your good work on the megatec_usb driver. I have made a few more (cosmetic) changes. Is the driver now working stably for your device? In particular, do the instant commands (and particularly "upsdrvctl -k") work properly? In this case, we could hopefully mark the device as "supported" and merge the driver to the main branch. There is still the

Hi, Has anyone had success with the Dynamix 650VA, that uses the USB cable? I can't get megatec_usb to recognize it, I have tried both stable and development versions. Regards Glen Ogilvie

> Author: agordeev-guest > Date: Wed Oct 3 00:09:21 2007 > New Revision: 1136 > > Log: > - drivers/megatec_usb.c: added ability to do subdriver-specific > initialization, and moved some shared code to agiler init function > since krauler doesn't need it. [...] I'm not very thrilled about this patch: 1) Down at the subdriver level, one shouldn't use

Like Glen Ogilvie, I got a newer Dynamix 650 VA with USB connection, and was having trouble getting NUT to communicate with it. This appears to be the UPS that megatec_usb was built for - Vendor: 0x0001, Product: 0x0000, uses Megatec's software, has USB chip attached to internal serial lines, and has terrible USB implementation with fake HID tables. But megatec_usb would consistently fail.

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Hello, I would like to know if it's possible to use nut with a Unitek Alpha 650ip* and if it's possible which driver should I use ? Thanks.

Hi again, I tested several times using the Megatec driver from nut 2.2.2 to no avail, as it definitely never "sees" the UPS. Always getting : # drivers/megatec -DDD -a Alpha Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec] Carlos Rodrigues (c) 2003-2008 debug level is '3' Starting UPS detection process... Asking for UPS status [Q1]... Q1 => FAILED

Hi everybody, I've got an Unitek iZi UPS 525 with a serial interface. The supplied cable looks fairly simple: RX->RX , TX->TX and GND->GND. Using this cable and Minicom with 2400 8N1 I'm able to issue commands to the UPS using the "Megatec Protocol" http://www.networkupstools.org/protocols/megatec.html so I know the UPS is fairly "intelligent" :-) and the

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2