similar to: MGE Ellipse Max 1100 configuration question

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

Dear List, The driver usbhid-ups does not detect my MGE Ellipse 1500. I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2, nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!) lsusb shows: Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS /etc/ups/ups.conf says: [myups] driver = usbhid-ups port = auto desc = "Local UPS"

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

Hello, It is 3 or 4 weeks ago since, i want to set communication with my ups a MGE NOVA 1100 AVR. I do it first with manual configuration but after no success, i prefered to install mgeups-psp package to do it directly. But since when i execute psp, the attempt finish with an "No communication with UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left.

Hi, I have recently purchased MGE ellipse 1200 UPS for my home system. Obviously, the choice of this particular brand was mainly dictated by MGE's long-standing support for Linux and NUT project. The fact that the box was clearly the prettiest looking one on the block did help also ;-). I have had NUT tools installed and configured in no time, as I did it numerous times before -- kudos

I have trouble in getting communication work with MGE Ellipse 500. I bought it second hand and I don't have the cable for it. How do I know if it's the Serial or USB model? The serial number of the unit is: 769B16015. I suspect it is the serial version as the label next to the RJ11 stands "com port", but I can't be 100% sure. MGE Ellipse serial cable pinout can be found

Hello, I have installed mgeups (for Mge ellipse premium 500) in a Suse 10 x86_64 machine with yast2. But when I try to launch psp I receive the next error: psp: error while loading shared libraries: libgtkmm-2.4.so.1: cannot open shared object file: No such file or directory and don't start. The rpms installed are: mgeups-psp-3.0.1-3 nut-2.0.2-5 glibmm24-2.8.0-2 gtkmm24-2.8.0-2

Greetings Arnaud and others, I've been using NUT with Gentoo Linux for a couple of years now. I recently installed SUSE Linux 10.0 and I'm having difficulty getting it to recognize my UPS (MGE Ellipse). I tried the MGE-PSP package, but the GUI crashes immediately on startup. I decided to get just NUT running correctly before worrying about that. I uninstalled MGE-PSP and am left wtih

Hello, I'm experiencing a strange early shutdown behavior with the following system: * */OS/*: Slackware Linux 14.2 x86_64 * */NUT/*: 2.7.4 (from my own package <https://sotirov-bg.net/slackpack/pack.cgi?id=4083>) * */UPS/*: MGE Ellipse PRO 1600 <powerquality.eaton.com/Products-services/Backup-Power-UPS/Ellipse-PRO.aspx> (bought in September 2017) */Problem

Hello, I'm using NUT to manage a MGE Ellipse ASR UPS, with the newhidups driver. It works fine, except that after a few hours, I get a few errors from the kernel and the driver dies. Here's the output from the syslog: Apr 26 02:00:41 ezquiel kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255 ret -110 Apr 26 02:00:43 ezquiel last message repeated 2 times

I am running Ubuntu 6.06 connected via serial port to an MGE Pulsar Ellipse 800VA. Have just installed NUT 2.0.3, and have problems with connectivity. This UPS was workign via serial connectivity to a BSD system only a few days ago. I have followed the instructions at http://opensource.mgeups.com/install/debian.htm The details... jason@ubuntu:~$ ls -la /dev/ttyS? crw-rw-rw- 1 root dialout 4,

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hi people. I'm trying to config a: MGE ELISE PREMIUM 1200 NT 02 Serial Nr. 92HE04008 With its serial cable into /dev/ttyS0. I had configured ups.conf, with no luck. Here is my ups.conf: [upscura] driver = mge-shut port = /dev/ttyS0 desc = "UPS" The permissions into /dev/ttyS?: crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 crw------- 1 nut nut 4, 65 mar 8 18:42

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

On January 11, 2020 3:42:15 PM GMT+02:00, Roger Price <roger at rogerprice.org> wrote: >On Sat, 11 Jan 2020, Georgi D. Sotirov wrote: > >> Jan 11 11:49:15 sotirov-bg upsmon[2677]: UPS mgeups at localhost on >battery >> Jan 11 11:49:15 sotirov-bg upssched[29746]: Executing command: >ups-on-battery >> Jan 11 11:49:15 sotirov-bg upssched-cmd: Unrecognized command:

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

I'm getting dmesg flooded with messages like this one: usbdevfs: usb_submit_urb returned -28 What's wrong? I'm using Linux kernel 2.4.32 and nut-2.0.3. The /etc/ups.conf contains [mgeups] driver = newhidups port = auto desc = "MGE UPS" Cheers, Rodrigo -- *** Rodrigo Martins de Matos Ventura <yoda@isr.ist.utl.pt> *** Web page: