similar to: Wildcard X100P Disconnect Problems

*This message was transferred with a trial version of CommuniGate(tm) Pro* Will asterisk actually convert between two different codecs????? ie, a SIP endpoint running GSM and another running G.711? Wouldn't that add quite some latency? I was always under the impression Asterisk did not recompress and was smart enough to negotiate the right codec at each end and just pass through the RTP

Has anyone tried installing * on a box with two eth interfaces which is acting as a NAT box? I have only one IP at this point and I would like to get * working without all of the NAT issues. My idea is to run * on my gateway (which is also running the firewall and masquerade services). All of my UAs (Grandstream + Xten X-LITE + gnophone) will be inside the NAT screen, and will connect to the *

Hello: I am testing Asterisk with oh323. My question is: can Asterisk route some calls thru a second h323 gateway (a h323 <-> PSTN gw)? - Asterisk ip: 192.168.1.10 - h323<->PSTN gw: 192.168.1.20 I've tried: exten => _9XXXXXXXX,1,Dial(OH323/192.1.1.20) or exten => _9XXXXXXXX,1,Dial(OH323/BYEXTENSION@192.1.1.20) but it does not work at all. If my h323 client

Hello everyone. I am having problems getting speex support. It seems * is not loading speex. When i did a make in the codecs sub dir, the following error pops up when making speex: codec_speex.c:34:19: speex.h: No such file or directory is this file missing in the cvs as i just removed the whole * dir and did a new checkout and still seem to get this error, or do i need to get/install

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Trying to configure voicemail with H.323 all I get is the following errors when I call 123, 666, 665, 664 or 031. I'm a newbie at this so, I think it might be a simple fix. [chan_oh323.so] => (OpenH323 Channel Driver) == Parsing '/etc/asterisk/oh323.conf': Found 0:00.004 OpenH323 Wrapper OpenH323 Wrapper Version 0.0alpha0 by inAccess Networks

Hi all, There is something special I must configure in order to get the voice mssage by mail? In voicemail.conf I have: serveremail=asterisk@mydomain.ro attach=yes [default] 301 => 6535,Home Mailbox,dtoma@fx.ro I have tried to let a message for 301, but this message is not forwarded by mail. I am missing something? Thanks, Dan

Does anyone know if this unit works with Asterisk? Thx. B.

Look like SNOM have rolled back the firmware version of the 200's from 1.16w to 1.16q.. Anyone know why? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hello, I'm new user of asterisk. Can anybody pls tell me how to use asterisk or any detail how to link???? i installed Asterisk-0.4.0 on i810 onboard sound card with Redhat 7.1. when i type "asterisk -vvvc" i get *CLI> prompt Prakash Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy The Best In BOOKS at

incominglimit is already implemented for SIP. Just specify under the endpoint how many incoming connections are allowed. For example, [cisco] type=friend username=cisco secret=blah nat=yes ; This phone may be natted host=dynamic canreinvite=no ; Cisco poops on reinvite sometimes qualify=200 ; Qualify peer is no more than 200ms away

Hi Anybody have a example or use this modem as FXO, acording to intel this modem is a real full duplex modem, so i have one question why i can we use this modem as fxo My idea is simple when you recive a call in the modem you can transfer this call to any other place using for example a IAX2 or Openh323 protocol This is posible? Thanks

hi, i have a external usrobotics modem, i want to use it with asterisk to interact with the pstn, what i have to do? thanks, -- santiago jos? ruano rinc?n administraci?n servidores y servicios de internet red de datos universidad del cauca -----BEGIN PGP MESSAGE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org

On Sun, Aug 17, 2003 at 03:44:21AM -0500, Gnophone Support wrote: > Hello, and thank you for registering at gnophone.com. Your login > information is listed below: > > Username: miernik > Password: ******* > IAX Phone Number: 17002916107 > > Please login as soon as possible to > http://x.linux-support.net/directory/ to complete the

Hi all, I'm setting up my first * install and have it peering with another * machine using IAX across the internet which provides our pstn gateway. So far I have the IAX "friend" set up correctly but when I make a test call from an external phone, I get: WARNING[5126]: File chan_iax.c, Line 648 (get_timelen): Don't know how to calculate timelen on 8 packets I have set up a

Hi, I have just been playing with the latest X-Lite.. It works fine with Asterisk.. As for codecs I tested G.711a/u, GSM and iLBC... iLBC is the only one that didn't work.. not sure why.. But the bigger problem is that when I call another extension that is using a Snom200 the call connects but there is no audio in either direction.. I have tried G.711a/u and GSM and while X-Lite shows that

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then

----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Saturday, September 13, 2003 7:55 PM Subject: Asterisk-Users digest, Vol 1 #1279 - 16 msgs > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

I''m hoping there''s an easy way to do this.  I''m trying to read options from a database, and insert them into form tags.  So for example, In the Database Table: options size: 300 type: text_field maxsize: 300 and I want to create a text_field form tag, with all the appropriate options, is there an easy way to do this, other than having the code output the HTML