similar to: Increasing the fxorxgain and fxotxgain for the hardware of the digium card

Hi All; How to let the virualbox (ubuntu OS) to be able to see the digium card? Because when I install elastix or asterisk with dahdi, it is not able to see the digium card if the installation though the virualbox .. What is the solution? Regards Bilal

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hello All; Wanpipe is working only with sangoma cards so it does not work with digium cards? Also, who is better: to have echo canceler built in with the hardware or using olsec? Regards Bilal

Dears; To patch libpri: I just place the patch file in the libpri source directory and then I run make and make install? Or I need to compile the dahdi and asterisk also? If the problem stayed, do I have to go for previous libpri version? Or for previous dahdi version and asterisk version? Regards Bilal ----------- > bilal ghayyad wrote: > > But I am afraid it is a bug because I

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

Hi List; Is there an Digium cards support GSM SIM cards so we can fix an SIM card to be used for calls within mobiles as it is less rate? Or I have to use an FXS to SIM adaptor? If yes, then anyone advise a models and prices? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo!

Hi Marc; Are you using VPN between the two sites? If that is the case, then you wil have a low volume and I faced this problem. Just try without VPN. Another issue: the call is originated from the Mobile (or PSTN) and you call to Zaptel and then do the call via SIP (or IAX) Trunk? Or you are facing a low volume when you call from FXS (or from IP Phone)? There is a way to increase the volume on

Hi List; Is Digium the best telephony cards to be used with Asterisk? The prices are some how high, any suggestion? Regards Bilal ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

Hi All; I installed one digium card of 2 fxo and 2 fxs, but the following problems related to the voice are happening: 1) Sometimes when I call to the PBX, I hear like modem sound and after little it disapear. 2) There is a disturbance in the background (like the channel radio disturbance that might happen if the frequency was not captured well), and that disturbance appear much more when

Hi List; If I am configuring Diguim Analoge card, then I need to run #modprobe wctdm, but the question why I need to run #modprobe zaptel also? What #modprobe zaptel does a things that #modprobe wctdm does not do? Any help? Regards Bilal ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

Hi All; When the call coming via the E1 dahdi and I handle the call (as first step) by exten => 5631040,1,Goto(OrangeCMG,s,1) it is not working and the call will be disconnected instead of queued. But, when I handle the call (as first step) by playing any sound file and then send for the queue, then it is working fine, WHY? exten => 5631040,1,Playback(WelcomeMessage) exten =>

Hi; How can I know the duration that the DAHDI channel is still used? I need to know its status and since when it is in this status, how? Also, is it possible to hangup the channel if it has been openned more than 90 minute? Other than using the timeout in the Dial command (because this I know it). What is happening with me that from time to time, I find some DAHDI channels are stayed connected

Hi All; To download, compile and install DAHDI, do I need to download the both (dahdi-kernel and dahdi-tools) If yes, then do I need to do the compilation and installation command for each package? What is the method to download, compile and install the both packages as one package? By the way: Why there is dahdi-kernel and dahdi-tools? In other words, for what the kernel is used and for what

I am talking about the SIP. Now the new mobiles (Nokia, Erecson, Panasonic, iPot, ... etc) all of them support SIP capability. They are able to register to any SIP server (by giving the IP address, username and password). Fring is one of the software that can be installed on the mobile devices and can register on the SIP servers. BUT, the new mobiles currently come with built in SIP (no need to

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

Hi All; Any one used Digium IP Phones D40? I need to know if they are stable with good voice quality? Comparing to Polycom 330, which is better? Let us talk frankly although I know that we have to support Digium. Regards Bilal

Hi All; Anyone knows if there is an Asterisk version that setup can be stored in Database instead of the configuration files (.conf)? Any advise? Regards Bilal

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.