similar to: ilbc codec

Dear All, i would like to ask please if someone tried to make a codec conversion from ilbc to g729, because i did that but the voice quality was too bad and a lot of disconnection.. Can i get your feedback regarding this issue please? regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear All, I have the following CPU info on my asterisk server: Linux switch1.domain.net 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 i686 i386 GNU/Linux I need to install G729 on the asterisk server just to pass through and not for encoding...Which G729 package do you advice me to install? I tried several packages with no luck Regards -------------- next part -------------- An

Hi! As the upstream of my DSL-connection is very slow, I'd like my sip-phones to use iLBC to connect to my *. My gateway provider only allows ulaw. Hence, I'd like to use the follwing setup: SIP-phone <--iLBC--> Asterisk <---ulaw----> PSTN-Gateway I get the following error: "Unable to find a codec translation path from ilbc to ulaw" Setup SIP-phone: disallow=all

Hi, I cannot get SIP channel working with folowing codec configuration: [sip] disallow=all allow=g723.1 ;I need this codec between sip phones (BT100) allow=ilbc ;Use this codec to others Calling between BT100 SIP phones is OK - asterisk makes native bridge (with g723.1) between them. When I'm calling from SIP to other channel (iax,zap,...), asterisk is not able to chose right codec

I tried using the iLBC codec, and whlie I like it, I ran into a strange issue. I did a few searches on Google and haven't found anyone with the same issue as this. Anyhow, I was using a Plantronics analog headset and box plugged into a Digium TDM card, dialed out over my VoIP provider's IAX channel to the PSTN. I was in a conference call which is running on an Avaya PBX (which

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

adding gsm or just comment out the disallow and the 2 allows. (your = recipient is using a codec that isn't ulaw or alaw). =20 _____ =20 From: asterisk-users-bounces at lists.digium.com = [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel = freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

Dears; I do not know if any had experience in using speex or ilbc with IAX and got good results, because I am facing a problem with GSM. I am facing a noise problem when I am using GSM with IAX trunk as following: IP Phone (G711) ---> Local Asterisk Box ---> IAX Trunk using GSM codec ---> Remote Asterisk Box ---> Digium Card (FXO) to terminate the call to the destination While no

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

I want use iLBC and have following in mind, please help me is it possible ? ISDN <-----(ALAW)-----> * <-----(ALAW)-----> SNOM SIP??<-----(iLBC)----->?*?<-----(ALAW)----->?SNOM 1. ISDN incoming codec is ALAW SNOM codec should be ALAW (can't be iLBC because a lack of codec). 2. SIP incoming codec should be iLBC (snom is ALAW). 3. SIP outgoing codec should be iLBC /snom

Recently, we were notified that the mechanism included in our Asterisk source code releases to download and build support for the iLBC codec had stopped working correctly; a little investigation revealed that this occurred because of some changes on the ilbcfreeware.org website. These changes occurred as result of Google's acquisition of GIPS, who produced (and provided licenses for) the iLBC

Recently, we were notified that the mechanism included in our Asterisk source code releases to download and build support for the iLBC codec had stopped working correctly; a little investigation revealed that this occurred because of some changes on the ilbcfreeware.org website. These changes occurred as result of Google's acquisition of GIPS, who produced (and provided licenses for) the iLBC

hallo all, could sombody please help me, i dont know why nativ bridging is not working when i choose the ilbc codec, with speex it is working,?? iaxcomm (ilbc) ---> asterisk --> ( asterisk2 --> sip grandstream (alaw) ) \-----------------native bridge------------------/ 1. if i use on iaxcomm as default speex, nativ bridging between iaxcomm and my sip phone is working 2.

i tried asterisk ilbc codec against kphone. when the call got connected, i started to immediately get these kind of message to the console: WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of 52 bytes long from RTP (50)? WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of

Dear Sir, Can someone help me please to find a free ebook talking about AGI scripting through asterisk? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090218/a59fc299/attachment.htm

Hi, I need to have some SIP extentions on remote places where the latency from my asterisk box with public ip is 1~1.5 seconds. What codec will work fine on this sceneary? I'm planning to use iLBC, is a good choice? Regards, Guillermo.

Does anybody know if the updated licence on iLBC makes it safe to include in Asterisk when used in a commercial environment again? https://sites.google.com/site/webrtc/ilbc-freeware It seems to require that the Google iLBC licence document is on the box, but that otherwise it is free-to use by all in any way (BSD licence style). I believe that prior to that there was a requirement to register

I noticed it by chance while digging into the code, I think it's a great news! Darkbasic