similar to: DAHDI - skipping sound on voicemail

Hi, I know it sounds weird, and this is part of the reason I have not reported that sooner. As I upgraded from 1.6.2.x to 1.8.x several months ago I am experiencing this problem. If a call is initiated from a DAHDI extension after no DAHDI extensions were used for some time, arbitrary DTMF digits are skipped and the call fails. If the call is redialed it goes through. Normally just one (1)

Hello, My first attempt to get dahdi running on 1.4.28... with a Rhino 8 port modular card and a single FXS module. Got the Rhino card installed and the machine sees it: root at pbx:/etc/dahdi# dmesg | grep rcbfx [ 71.985309] rcbfx 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 71.985440] rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at ffffc90008d7c000 [ 71.985504]

Hello I have upgraded our asterisk box from zaptel to dhadi two weeks ago... Since, there has been quite a significant amount of echo when making a call. Only for the local outgoing call, the person on the other side doesn't hear any echo. This is with a TE-110P ISDN PRI card .. I've pretty much took the original zaptel configuration and used it as-is with the dahdi one ; to no

Good day , I have configured TDM410P (asterisk 1.6.x) on Cent OS 5, but dahdi take some time to hangup the call when playing the IVR..(it will send the hangup signal after finishing the IVR promt..) is there any specific setting to avoid such incidents ? iam using busycount as 3, signalling=fxs_ks ;toneduration=100 callwaiting=yes threewaycalling=yes callreturn=yes

I was running : asterisk 1.2.24 zaptel 1.2.21 libpri 1.2.6 I remove zaptel and compiled asterisk 1.4.22 libpri 1.4.7 dahdi 2.1.0 dahdi_cfg -vvv DAHDI Tools Version - 2.1.0 DAHDI Version: 2.1.0 Echo Canceller(s): Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel

[Dec 23 17:58:49] ERROR[3091]: chan_dahdi.c:8413 dahdi_pri_error: XXX Missing handling for mandatory IE 12 (cs0, Connected Number) XXX I am seeing the above error on DAHDI 2.1.0, asterisk 1.4.22 and libpri 1.4.7 I am using a TE120P card. I am also getting this VERY frequently: -- Channel 0/1, span 1 got hangup request, cause 16 -- Hungup 'DAHDI/0-1' Versus a normal hangup:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm testing a telephone connected to FXS port of a Sangoma A200 card. But I'm observing that callerid is not working. The configuration that I'm using in chan_dahdi.conf is the following one: - --------------------------------------------------------------------- ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

I installed DAHDI (2.1.0.3) on a machine with asterisk 1.4.22 and libpri 1.4.7 and I am getting the error: -- Requested transfer capability: 0x00 - SPEECH -- Called 23/317506XXXX -- Channel 0/23, span 1 got hangup, cause 99 -- Hungup 'DAHDI/23-1' on DIALING out. Calling in seems to work just fine. Seems like everything is configured fine... system.conf

I have a system setup with two T1 circuits, the customer complains of call quality issues. I've checked logs and don't see anything too strange, but when I run "dahdi show status" I see: Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO T2XXP (PCI) Card 0 Span 1 OK 0 0 19 ESF B8ZS YEL 0 db

Hi. My configuration is Elastix 1.5.2-2 (asterisk 1.4.24, libpri-1.4.3-5, dahdi-2.1.0.4-7 ) and OpenVox d210e connected to telco provider (Euro ISDN). Here is my /etc/dahdi/system.conf: # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=oslec,1-15,17-31 # Span 2: TE2/0/2 "T2XXP

The card you installed has FXO or FXS modules in it ????? are you getting your lines directly from the telco co??? Doug D On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent: * -----Original Message----- * From: Todd Reese * Reply-to: Asterisk Users Mailing List - Non-Commercial Discussion * To: asterisk-users at lists.digium.com [3] * Subject: [asterisk-users] Dahdi

[18884732963 at from-fax-machine:... - your call is hitting the from-fax-machine context - yet your 'fax' exten is in the from-pstn-4 context. See the "[2011-03-17 13:40:29.6] NOTICE[8825] chan_dahdi.c: Fax detected, but no fax extension" line. When Asterisk detects an incoming fax tone - it tries to automagically route the call to the 'fax' extension in the SAME

Hello List, it is a very long time since I wrote here.... It has been still in Zaptel times.... Today I am run into a related problem: I can't get a DAHDI setup to work 100%. I am configuring an Astribank XR00013 (BRI, two ISDN ports). At some degree the installation (latest DAHDI drivers, Asterisk 1.6.0.18 on Centos 5.x) works. I can get incoming calls to the dialplan context that is

Hi Guys, I have been trying to implement the following for days but with no success, any help would be greatly appreciated My asterisk box gets calls from the SIP interface and forwards to the DAHDI interface for example --sip.conf- [smycontext] type=friend host=xxx fromuser=xxx context=mycontext disallow=all allow=g729 allow=g723 allow=ulaw allow=alaw --extensions.conf-

I'm running Asterisk 1.8 from Debian. I have some analog phones connected via a TDM400P. I'm testing them with these simple extensions: exten => 600,1,Answer() same => n,Festival(This is an echo test) same => n,Festival(Hang up or press pound when you are done) same => n,Echo() same => n,Festival(Good-bye) same => n,Hangup() exten

Hi! I have Asterisk 1.6.1 installed on OpenSuSE 11.0 running with choppy sound. One specialist on the forums asked me if I have DAHDI configured, he assumed that this could be cause of choppy sound problem. > dahdi_test Unable to open dahdi interface: No such file or directory Do I need to configure DAHDI even if I do not have any Zaptel devices? Is there any guide for configuring

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,

The Asterisk Development Team has announced the first release candidate of: DAHDI-Linux-2.6.3-rc1 DAHDI-Tools-2.6.3-rc1 dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1 This beta release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete -

The Asterisk Development Team has announced the first release candidate of: DAHDI-Linux-2.6.3-rc1 DAHDI-Tools-2.6.3-rc1 dahdi-linux-complete-2.6.3-rc1+2.6.3-rc1 This beta release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete -