similar to: More Cores or more CPU Speed

Hello, The MeetMe application refuses MusicOnHold personalized and skip always in the default! Have you any idea how to fix this? -- Executing [028883899 at default:1] Set("SIP/109.10.214.1-00000002", "CHANNEL(language)=fr") in new stack -- Executing [028883899 at default:2] Answer("SIP/109.10.214.1-00000002", "") in new stack -- Executing

Dear All, I appreciate any advice or hints you could provide about the following. We are running R code in a server (running Windows XP and QuadCore Xeon processors, see details below) and we would like to use the server efficiently. Our code takes a bit more than 6 seconds per 25 iterations in the server using a default R 2.10.0 installation. We tested our code in two other computers, a Dell

Hi, my video sharing website (politube.org) that I developed with rails, runs on lighttpd/fcgi (I know it is obsolete by now) and is severely under load and regularly blocks because the lighttpd process chews up 50% of RAM (1GB). So now I want to move the system to a new server with 8GB, 64bit , Quad core processor (intel i7 920) but I am not sure if hyperthreading will really do anything better.

Current Installation: CentOS 7.1503 with SerNet Samba 4 ver. 4.1.17 configured as Active Directory Domain Controller. Current Installation: HP Workstation with dual Xeon quadcore cpu's and 4 x SATA hard drives NOT configured in RAID array. New Installation: CentOS 7.1503 minimal install New Installation: SuperMicro with single Xeon quadcore cpu and 4 x SATA hard drives configured in two pairs

Is there anyway to use all 4 cores on my quad core during compilation? It appears I am only using 1 core. I am hoping there is a flag I can pass to the makefile. Alternatively, I could probably break the makefile in four different makefiles for compiling and a separate makefile for linking. From there I could execute the compile makefiles seperately and finally the link makefile when the others

Hello, i have just migrated machine to xen server where only 2 cpus are available. I have copied config from machine where domU was located before. That machine had 4 CPUS (QUADCORE), current machine has 2 CPUS (1 XEON 2cores). I have forgot to change vcpus from 4 to 2 in config, but .. what really surprised me ... machine started . How it is possible? It was really slow alltought and not

Hi, I was able to implement T122p one port PRI and was able to call out, but I am planning to use TE412p (includes echo cancellation) 4 port digital card (PRI), I wanted to know can asterisk support 3 four port PRI cards (12 PRI connections) with proper hardware like dual core quadcore processor and 8gb RAM in one server? Also I was planning to implement using 64 bit architecture with Asterisk:

Dear all, I've recently purchased a new 64bit system with an intel i7 quadcore processor. As I understood (maybe wrongly) that to date the 32bit version of R is more stable than the 64bit, I installed the 32bit version and am happily using it ever since. Now I'm running a whole lot of models, which goes smoothly, and I thought out of curiosity to check how much processor I'm using. I

Good morning, The tuning page says worker_processes should be at least the number of CPU cores on a dedicated server. In the case of hyper-threading, should this be the number of cores or the number of threads? For example the Intel Core i7-2600 Quadcore[1] has 4 cores and 8 threads. Would I start my worker_processes at 4 or 8? Finally, would the same apply to Nginx worker processes? Many

Hi, we would like to establish a small Lustre instance and for the OST planning to use standard Dell PE1950 servers (2x QuadCore + 16 GB Ram) and for the disk a JBOD (MD1000) steered by the PE1950 internal Raid controller (Raid-6). Any experience (good or bad) with such a config ? thanxs, Martin

Hi all. I'm being asked to connect two networks, each having it's own PDC and it's own LDAP backend. I would like to know if it's possible to make both PDC's serve each a different domain with a single LDAP backend and having users from DOMAIN1 roaming to DOMAIN2 and viceversa. If it's of any use I have, in the past, set up a PDC+BDC configuration having

Hi Guys, sometimes if one caller or many callers are in a meetme Room and a new one join the room, then he or another caller into the same room where kickt from the room. It's very strange for me and in logs (full) I can't see anything. is it possible to log more from meetme.c ? can anyone help me and maybe someone has also the problem as i and have an solution. I use: asterisk-1.6.2.7

Hey, i forgot to ask, how can i get the user number from a caller he is in a conference, i don't find a variable to us this for the current channel. Only the command "meetme list <roomnr>" shows the usernumber, but i can't use this output. Thanks. Daniel

Hallo list, i am testing a Dell M610 with two quadcore Intel Nehalem CPUs at the moment, so with Hyper-Threading 16 cores in total. As mentioned in the subject I am using Ubuntu 8.04 64Bit and Xen 3.2 from Ubuntu package. During these tests I hit on some issues, which are not clear to me. I would be thankful for any comments/hints/thoughts on the following topics: 1. I recognized that

On Tue, 29 Nov 2016 19:26:30 +0100 "Stefan G. Weichinger via samba" <samba at lists.samba.org> wrote: > Am 2016-11-29 um 19:12 schrieb Andrew Bartlett: > > > I'll let you choose the way forward for your site, but if you can > > just re-create what fails to convert because it is just a service > > account, that seems quite reasonable. > > >

Hi ! I'm working in a educational administration, i've made a domain with a Samba 3.4.1 PDC with a LDAP backend. When a user log into an XP Workstation, i see in the log file a lot of "init_sam_from_ldap". In fact, instead of scanning only the user who try to connect, a lot of them are scanned. I've got about 600 account into the LDAP so the time needed by the user

Hello, I have a problem with a new install of xen. I work on a Dell poweredge 2950, bi xeon Quadcore ang 32G of memory. The domain0 run on a gentoo 32 Bits. I use xen 3.1.2 with pae xen kernel : 2.6.20 So when i boot on a normal kernel, i see all of my memory. But when i boot on the xen kernel, i have only 15G memory available. I try to force the size memory in the boot options in grub

Hello, I'm trying to play SC2 with the following setup, and it's only playable with the lowest settings. I think I've already put in most of the tweaks that people typically point to. Can I get advice on how I can get reasonable fps for higher settings? Here's my setup: GTX 460 1GB Intel Q6600 2.40ghz Quadcore 3gb memory nvidia 260.19.06 wine 1.3.3 screen resolution:

On Tue, 29 Nov 2016 20:48:27 +0100 "Stefan G. Weichinger via samba" <samba at lists.samba.org> wrote: > Am 2016-11-29 um 19:55 schrieb Rowland Penny via samba: > > > You can use the DC as a fileserver, it is only for minor technical > > reasons that it isn't recommended, amongst which is that you have > > to use windows ACLs. > > that is really

Óscar Fuentes <ofv at wanadoo.es> writes: > greened at obbligato.org (David A. Greene) writes: > >> Óscar Fuentes <ofv at wanadoo.es> writes: >> >>> A good measure of how fast a set of Makefile are is to run the build >>> with all targets up-to-date. Both builds takes a few seconds (3 or so) >>> on my Linux quad core box. Whatever