similar to: Slightly OT: Android phone as sip-gw?

Hello, Are there any gateways which allow me to hook a cellphone to Asterisk and use that line for routing my calls? Basically, I'm looking to play around a bit and if I can get to connect a cellphone with Asterisk then that would be great. Thanks, Hitesh PS: I have tried to search on the web, but didn't find any pointers on how to do so. -------------- next part -------------- An HTML

Hiya, SIP Messaging is implemented in asterisk-10... >The only documentation I can find talks about a patch and is pretty old:>http://www.voip-info.org/wiki/view/Asterisk+SIP+Messaging <http://www.voip-info.org/wiki/view/Asterisk+SIP+Messaging> Like anything on voip-info.org it's horrible outdated. I think there's a documentation for the message-routing in docs.... Regards

Hello, I am looking for a gsm gateway that is SIP based i.e no need of FXO/FXS analogue connection. I searched the email archives and found messages from 2008 but not sure how accurate these are. What do you use and how well it works ? The only sensible one I found is one made by portech and one that is made by Eurodesign. The one from portech is like a trunk while the one from eurodesign

Hi, I have a Portech MV-374 GSM Gateway and I'd like to send SMS from a web page to confirm the subscriptions. How can I achieve it? Is Asterisk of any use to send SMS with the Portech? I really have no idea because I know nothing about the whole SMS thing... Thanks, Niccol? -- http://www.linuxsystems.it

Has anyone been able to configure portech's mv-378 gateway with asterisk? I did the configuration as per the manual but it does not work. My server sees the portech gateway, but when the gateway is trying to register to my server it fails. It says peer is not suppose to register. The gateway and the asterisk box are on two different location (two network, 2 differrent IP address). I would

I'm trying to compile chan_mobile for asterisk 1.4 I've installed 1.4 from SVN and downloaded addons from SVN also. I make ./configure, make menuconfig, select only chan_mobile, and make. Then I obtain the following errors. (I've also tryed applying the patches I found at http://www.chan-mobile.org/?page_id=5 but with no better results. make[1]: Entering directory

Hi All, I would like to ask for some advice how to solve following situation: We have to record and decode isdn PROGRESS message and when particular message is found call should be hang up and dialplan should continue. So far we have come up with two ways we think solve the problem and would very much appreciate to hear your opinion. 1) add special progress extension to dialplan so we can

More than 60% of our outbound calls are now to mobiles, so the time has come to whack in a gsm channel bank. Does anyone have any preference of bank ? Do you use a PRI or VOIP connection from the bank to asterisk ? Real-world experiences are sooooo much better than marketing blurb ;) We currently have a TE412P with a free socket, so we have a choice either way. I am looking for up to 30

Hello, I just did a fresh svn install of 1.4 trunk everything. Everything compiles and installs just fine. When I get to asterisk-addons, I cannot select chan_mobile in menuselect. Chan_mobile is not even an option in menuselect for asterisk trunk. I tried the latest patch which failed in many places but did add an option for chan_mobile in menuselect for asterisk but it still cannot be

Managed to get the portech 370 up and running with asterisk (even got the callerid working!), but was wondering how (if) it is possible to send / receive sms messages through the device . All I could find googling was people asking how ;( Does anyone have sms working with this device ? Julian ______________________________________________________________________ This email has been scanned

Hi; If my landline service provider does not provide the ability to send the SMS, and I need to send SMS from asterisk, then what is the required? How? Is it possible to send SMS from asterisk using SIM card to be connected via GSM adaptor connected to FXS ports? Or HOW?

Hi all, I receive this error while compiling chan_mobile: gcc -g -c -fPIC -fPIC -o chan_mobile.o chan_mobile.c chan_mobile.c: In function `mbl_load_config': chan_mobile.c:1745: erreur: trop d'arguments pour la fonction ? ast_config_load ? make[1]: *** [chan_mobile.o] Erreur 1 make[1]: Leaving directory `/usr/src/asterisk-addons' Does anyone know what's the problem? --

I'm finally migrating from the 6/7/05 CVS version to 1.4. Had quite a run, I have to admit. Asterisk itself only segfaulted once or twice, but the dns issues have been bothering me. And the box just needs to go. Everything is going on a Ubuntu 6.06TLS server, that's been perfectly stable. I had 1.4.1 installed and running, but not configured. Yesterday I upgraded to 1.4.11,

I've been asked to purchase a gsm gateway for use with our asterisk server (for our use, not reselling) I have a spare ISDN port on the server, so I have use either a PRI or VOIP gsm gateway. What would people recommend ? Has anyone used the QuesCom 400 ? I would also love to know a rough idea of cost ;) Once I've gotten the info, I'll post a message on the biz list for a

Hello, On a LAN, is it possible to install a bluetooth dongle on one workstation (at this time, this workstation OS is not specified) and use it with chan_mobile ? I've read some USB over IP (or Ethernet) middleware exist but I'm not certain I'm looking at the right direction. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have had a search for this, but didn't come up with any results, so maybe I am using the wrong terms, sorry if this is an FAQ. For those who want to forward their incoming voice calls to a mobile, it could be a cheaper option to call a mobile from another mobile on the same network. This probably wouldn't be useful for users in USA, Canada or Hong Kong as costs to call a mobile is

Good morning everyone, I have had Samba 3.0.9 running on Solaris, connected to a Windows AD domain for a couple of weeks now, and i've suddenly started getting the following errors: [2005/01/07 11:31:55, 1] smbd/sesssetup.c:reply_spnego_kerberos(250) Username <domain>\IT075$ is invalid on this system It looks like some sort of issue with Kerberos, but I'm able to connect to

I have been looking forward for months to get chan_mobile working. I am limited to using prepackaged Asterisk code, mostly Trixbox. I have recently heard that chan_mobile is considered 'beta' and there is no effort to move it into the main code of Asterisk. Not even for Asterisk 1.6. So what is the future for chan_mobile? It is easy to make a very strong case for a cellular trunk.

Hi, I am currently building a 1.4.4 Asterisk box for a client and they are interested in GSM functionality. Does anyone have any experience with a GSM card, preferably Quad Span (4 GSM modules or higher) for use in the UK. I have seen the Junghanns* version but I am not keen on the limitation of having to use a BriStuffed version of Asterisk. Do Digium make one ? as I am unable to find

Hi, I have configured a certified asterisk 13 server with chan_mobile and res_pjsip. I have a Cisco 7940 hardphone and I use ekiga as softphone client. Now the problem is, using the hardphone I'm able to call the softphone and hear everything properly. But when I call from the hardphone to some number that has to be dialed via chan_mobile, I'm not able to hear what the other side says (I