similar to: Retrieving sound files from DB as opposed to filesystem

On Mon, May 2, 2011 at 3:15 AM, A E [Gmail] <all.eforums at gmail.com> wrote: > Hello All, > > Probably a silly question, but we're wondering if people have had any > experience and have data to demonstrate if the performance of the Asterisk > system might suffer in terms of latency etc. if we're to have it retrieve > sound files from a database using odbc as

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hi! I have a really weird problem with some of my servers, namely all the ones running Centos5 When I try to download a file from the server to a machine outside our Cisco 6500 router/firewall, the download hangs about half the times (15 out of 40) when less than half a megabyte into the transfer (varied from 76 kb to 496 kb). One server has a portchannel (Cisco speak for ethernet bundle),

So I'm curious how SAS JBOD arrays and linux MDraid as implemented in CentOS6, and SES (SCSI/SAS Enclosure Services) backplane controllers 'get along' and how much configuration is needed to get the warning lights to work properly. scenario: whitebox server with a SAS backplane or two, daisy chained on a SAS HBA (like an LSI Logic 2008), and disks organized as several raid5/6

I am wondering if it's possible to use a bunch of cards in a PCI backplane instead of going out to the extensions with T1 and then and adapter. How are people connecting to large amounts of extensions?

Hello, using 1.8.4. using a very simple local AGI script in bash which has only one line in it: echo -e 'STREAM FILE welcome 123 \n' dialplan: exten => 5150,1,Answer() same => n,Set(CHANNEL(language)=en_AU) same => n,AGI(testagi.sh) same => n,Hangup console output: -- Executing [5150 at AllPhones:1] Answer("SIP/PBX-00000024", "") in new stack

During the diagnostics of my SAN failure last week we thought we had seen a backplane failure due to high error counts with ''lsiutil''. However, even with a new backplane and ruling out failed cards (MPXIO or singular) or bad cables I''m still seeing my error count with LSIUTIL increment. I''ve got no disks attached to the array right now so I''ve also

On 1/7/2015 11:30 AM, Gary Greene wrote: > During the reboot, most card?s drivers on init, will invalidate the cache on the card to ensure dirty pages of data don?t get flushed to disk, to prevent scribbling junk data to the platters. From what I recall, this is true of both the megaraid and adaptec based cards. Presumably, this cache invalidation is only on cards that don't have battery

On 08/30/2015 12:02 PM, Mike Mohr wrote: > In my experience the mass market HBAs and RAID cards typically do support > only 8 or 16 drives. For the internal variety in a standard rack-mount > server you'll usually see either 2 or 4 iPass cables (each of which support > 4 drives) connected to the backplane. The marketing material you've > referenced has a white lie in it:

I was recently evaluating much the same question but with out only a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced

Does anyone know which physical interrupt line out of the four on the PCI backplane the TE405P uses? Or is it somehow configurable by hardware or software? I'm trying to diagnose a problem where the card generates no interrupts in one system, but is fine in another system. These systems are SBC-in-backplane type. My knowledge of how PCI works at the physical layer is rather limited, but I

I got 2 cards working, and will need to add another 2 cards shortly. I hadn't thought about the matter-it's something I can try to play with later. What you've done here is awesome, where did you come across a system that could house 11 pci cards? ______________________________________________ Andrew Wehner Chatham Financial - Kennett Square T: 484.731.0029 -----Original

Greetings, We''re trying out a new JBOD here. Multipath (mpxio) is not working, and we could use some feedback and/or troubleshooting advice. The OS is oi151a7, running on an existing server with a 54TB pool of internal drives. I believe the server hardware is not relevant to the JBOD issue, although the internal drives do appear to the OS with multipath device names (despite the fact

Umm. First of all, I *AM* a member of this list, unless someone else unsubcribed me. If so, please put me back on. I've gone through my archives and I am very clearly subscribed to the list. The monthly freebsd.org mailing list memberships reminder tells me I am. List Password // URL ---- --------

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

Hi, I know (from the zfs-discuss archives and other places [1,2,3,4]) that a lot of people are looking to use zfs as a storage server in the 10-100TB range. I''m in the same boat, but I''ve found that hardware choice is the biggest issue. I''m struggling to find something which will work nicely under solaris and which meets my expectations in terms of hardware.

Valeri Galtsev wrote: > > On Tue, June 16, 2015 7:11 am, mark wrote: >> On 06/16/15 07:59, Ashish Yadav wrote: >>> Hi, >>> >>> On Tue, Jun 16, 2015 at 2:26 AM, <m.roth at 5-cent.us> wrote: >>> >>>> I was rsync'ing data from one system to another, and the recipient >>>> suddenly started throwing DRDY errors. Now,

> > > > On 10/11/11 7:29 AM, Arun Khan wrote: >>> that requires specific configuration to suit whatever drive interconnect >>>> you have. >> Does these bays have a connector (+ cable) that is connected to the >> motherboard or RAID card to control the HDD LEDs in the bay? >> (sorry if this appears basic but I have no experience with such

Hello - It's been sooooo long since I've tried hacking the kickstart media to include an updated driver but I guess that time has come again for me at least, getting an updated "igb" driver into the CentOS 5.2 installation for a HP DL165G5p(I'm not ready yet for CentOS 5.3). Anyways, I had a pretty basic question, I added a bunch of entries into the pci.ids file that were