similar to: Retaining original caller id

I am trying to receive both CID and DNIS from the telco through a non-pri T1. Currently I have the T1 setup and operational both outbound and inbound calls are completed as should be expected. The calls came in and were placed in the context specified in zapata.conf on exten => s,1. I have requested that the telco provide callerid (they call it ANI) along with 10 digit dnis for my 800

Hi list, I'm having a problem with CallerID names not showing up when calls come in. I have dialplan code to store the callerid(name) away and it is blank (null). However, the voicemail variable ${VM_CALLERID} has the name field populated. For example, here is some of the dialplan code: 2. Set(CALLER_ID_INFO_ALL=${CALLERID(all)}) 3. Set(CALLER_ID_INFO_NAME=${CALLERID(name)}) 4.

I have a question for those of you out there using VoicePulseConnect for incoming did I have in my Realtime extensions Database (the x's are replaced with my phone number) context = voicepulse-in-01 exten = xxxxxxxxxx/ Priority=1 app=NoOp appdata = Incoming call with no callerid on xxxxxxxxxx However it never triggers I also tried using one of my other providers (voipjet for outbound) and

I have looked into this callerid problem now for a few hours. 1) Caller id on a sipura-2000 now shows: cidname 2000 Where cidname is the new outputted formate from the cid_rewrite agi script and 2000 is the exten number. In looking at the Dial() application, option "o" 'o' -- Original (inbound) Caller*ID should be placed on the outbound leg of the call

Hi there, I am using the Asterisk as the PBX, and need to know the caller ID for the incoming call, but when I show the caller Id, it gives the Zaptel channel that recieves the inbound calls in the asterisk, Am I missing some configuration ! what should I do to be able to exteract the real callerId (that from the outside) from that channel, Thanks in advance, -------------- next part

Hi Folks, having an issue with outbound calls through a VOIP provider. Calls get sent out with the CallerID(number), but where does callerID(name) come from? Apparently not from provider, as we are seeing different (sometime missing) names on inbound calls, different than what we have configured. Apparently this comes from some telco database somewhere? Numbers were ported from a wired-telco.

Hi, I got a broadvoice "business" account under the byod(bring your own device) program. I have applied the patches and created new asterisk debian packages. I have the account working on inbound and outbound. The problem area is outbound caller ID. I have 3 other accounts with IAX2 providers and have no problem setting the caller ID on outbound calls. I called them and they

Hello list, We have some kind of a problem with our Asterisk installation. We want to be able to publish different caller id when placing outbound calls through the PSTN. We have Asterisk with TE410P and T1 from FDN Communications. The problem is that all our outbound calls show our main number, regardless of what we set with SetCallerID, even using CallingPres with all possible

I'm working on building a pbx that will allow us to use our cellphones as extensions (to some extent) The dialout is working fine. What I would like to do is have an inbound cellphone call appear as if it were an extension. So right now if I call in from cell #9995551212 the caller id is 9995551212 but if I dial extension 30013 it will call cell #9995551212. I would like to change the caller

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Hi All am using trixbox with call queues..I've set setinterfacevars=yes in queues.conf and following is dial plan : [test] exten => s,1,Answer() exten => s,2,Set(FILE_NAME=${CALLERID(num)}-${MEMBERINTERFACE}-${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)}) exten => s,3,Monitor(wav,${FILE_NAME},m) exten => s,4,queue(55365) exten => s,5,Hangup() but MEMBERINTERFACE is always empty - i

Hi, I have the following basic configuration: - one X100P card - two IP Phones (connected to an ATA186) When an incomming call on X100P, both phones connected to an ATA186 rings (configured like that in extensions.conf). When a call is established between the two ATA phones and a call occurs from the PSTN line, the callerid is correctly displayed on both phones (as internal callwaiting

I've got a rather strange callerid problem and don't know how to debug it. I've got two X100P cards installed in a RH9 box and both are connected to individual pstn pots lines. Both are equipped with callerid and both display callerid info on regular analog phones (verified 100%). Incoming and outgoing calls are handled just fine. When an incoming call arrives on one X100P card, *

Hi! I am getting inbound caller ID fine bout not out. I am in Sweden and suing Rixtelcom /POrt80 as provider. anyone knowing what is wrong? Also is anyone knowing about Swedish voices to trixbox/Asterisk? I have male now and am looking fro female voices. Regards Mattias -- Mattias Andersson -------------------------------- Storskiftesv?gen 6 145 60 Norsborg m. +46-70-799 44 41 h. +46-8-641 38

I am using AMI to Originate a call. I have been able to get the caller id number to be passed through. However, I can't get the name to be passed through. A person I'm working with has a Freeswitch that is able to pass the caller id name and number through for their call. Comparing the Asterisk SIP messages to the Freeswitch SIP messages, I have narrowed the problem down to a single

Hi Dan, i did it wrong, sorry: curl -v -H "Content-Type: application/json" -u asterisk:asterisk -X POST " http://localhost:8088/ari/channels/newChannelId" <http://localhost:8088/ari/channels/1400609726.3/play?media=sound:hello-world> --data '{ "endpoint": "SIP/Alice", "variables": { "CALLERID(name)": "Alice" ,

Greetings, 2 nights ago I upgraded one of my remote servers to the latest CVS Stable, Asterisk CVS-v1-0-02/07/05-16:13:48, and my inbound and outbound caller ID stopped working. At first I thought it was my carrier, so I've been yelling at them for the past day or so. I then upgraded my core network (about 8 asterisk servers) to the latest stable as of 3am last night, Asterisk

An additional follow-up question, if I need to set the P-Asserted-Identity on the create (originate), is there a way to do this with ARI? From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Dan Cropp Sent: Friday, August 7, 2020 11:51 AM To: 'asterisk-users at lists.digium.com' <asterisk-users at lists.digium.com> Subject: [asterisk-users] With ARI,

I have found several places where it is explained how to do this, and I have got the following setup, but it is not working (the provider claims they are not getting a proper caller ID setting from me). I have a number of extensions that are shorthand, that I will use one of as an example (real number hidden): exten => 2473,1,Macro(callout,##########) Then this (actual number hidden again):

I've got the following set up: Someone calls into my PBX on a single number (via SIP trunk from my carrier), and the get a voice menu of extensions. On one of the extensions, it rings a bunch of internal SIP hardphones, plus ringing my cellphone via a hairpin through the cairrier's SIP/PSTN gateway. The issue is that my cellphone shows my PBX's number, not the original calling