similar to: DTMF not being sent ( RFC2833 )

Hello A user seems unable to type DTMF in our Asterisk IVR menu. Can this be due to their phone or PBX that disables DTMFs when a user is off-hook? Thank you.

We need to conference together a call center agent, a customer and a third party IVR and send DTMF tones from the agent to the IVR. MeetMe has been eating our DTMFs so we'd like to try app_conference. Has anybody setup such a configuration in app_conference and how did you configure it? -HJC

Would anybody mind if the the following command options where added to MeetMeAdmin? 0 - 9, * and # I'm considering hacking the code to add these commands to play the DTMFs to the specified user as tones and hope that the SIP or IAX channels then work with these correctly. -HJC

Hello list, Hope you are all doing fine! I have stumbled over some piece of dialplan code in which apparently they were trying to avoid recording the DTMF tones in the wav file. It is really messy and I am not sure if this really works. So after a bit of research I found this comment ( https://community.asterisk.org/t/asterisk-dtmf-record/65040) in which it is said: *"Asterisk strips the

Hi, I'm having two problems. First - I'm using the xten x-lite program to communicate with asterisk, and everything works fine except that DTMFs are not transferred. I've set DTMFMODE to inband on both the sip.conf file and the x-lite configuration, and still it doesn't work. Anyone had this problem before>? Second thing: I get a WARNING:[1209214400]: File dsp.c,

Hello all, I have some questions about the libpri and zap lib. I've sent mail to Mark for help. Also I wonder whether anyone else would be interested and helpful in them. I'm going to migrate a program to Wildcard E400P card. Our original program is based on C API similar to the functions provided in libpri.h and zap.h, so I want to use the E400P card in the following way: 1. install and

Hello everyone. I've got this really annoying HFC Cologne card (or however I should call it - a single channel ISDN card based on the HFC chipset). It wrongfully detects lots and lots and lots of incoming DTMFs, to the point the card is not usable. Here's a sample out of CLI: P[ 1] I IND :DTMF_TONE oad:206361 dad:520101 P[ 1] --> mode:TE cause:16 ocause:16 rad: cad: P[ 1] -->

Hello! I've configured Music on Hold in asterisk, the only, most certainly, stupid problem I have is, which DTMFs to send to activate and deactivate it. If I use the cli, I can establish a call with originate. With the "misdn send digit" command I can send a number of digits to the other party. But what are the combinations to put the other one on hold? Or do I have to use a

Thanks very much for the reply Joshua! So I guess that setting dtmfmode=auto would be the safest choice in order to strip out the DTMFs from the recording, right? Cheers! Patrick Wakano On Tue, 1 May 2018, 19:36 Joshua Colp, <jcolp at digium.com> wrote: > On Mon, Apr 30, 2018, at 11:23 PM, Patrick Wakano wrote: > > Hello list, > > Hope you are all doing fine! > > >

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

Hello ! I 've some questions how bridging of ISDN calls is done. Assume an asterisk system with a TE405 card equipped. (PRI1 - PRI4) An incoming ISDN call on PRI1 is transfered back to PRI3. Unless there is DTMF detection or other things involved, the bridging is done without Asterisk. Does this card have a some sort of cross connection ? Does the PCM leave the card ? Or is there some DMA

Hi ! Did anyone had issues/managed to solve issues with DISA over Zap channels on * 1.0.X (STABLE) ? I have a situatuion where DTMFs that should be recognized in DISA work over SIP channels and do not work over ZAP channels (Zap channels are on TE110P) I have in default context: exten=> 299,1,DISA(no-password|default) and I have SIP extension 200 in [default] and I have Zap trunk which

Hi everyone, Could somebody enlighten me on this one? I have configured my asterisk to run on oh323 using codec g729. Incoming calls are working okay. But the thing I want to work is say pressing some options, say dial 1 to go to voicemail or dial a certain number to dial a specific extension. I have a config for this and tried calling from a normal PSTN and is working. But i just can't seem

Hello! I have asterisk updated from CVS on 31/8/2004 with sample configuration. I have just changed the sip.conf to register asterisk with sip proxy in out intranet. Then I can successfully make call to asterisk and go to demo IVR, but no response to dtmfs. I try to make call from several sip phones: Cisco7960, Ata186, Snom200. All of them send telephone-event in INVITE, but asterisk answers

Hi, I've just installed DAHDI at two PBXs as follows: *PBX-1 PBX-2* FXO ------------- FXS When I try to send calls from PBX-1 to PBX-2 I just receive the message: "Starting simple switch on 'DAHDI/1-1" It seems like if PBX-1 couldn't send DTMFs, but when I set immediate=yes at chan_dahdi.conf at PBX-2 dialplan is executed at PBX-2 but nothing is heard at

Hi, I have encountered a DTMF issue. My scenario: Access carrier-----sip----> Asterisk-1.4.25.1-----sip---->CiscoGW-----ISDN----->TDM Switch the access carrier sends to Asterisk out of band (rfc2833) dtmf, Asterisk forwards it with SIP INFO method to Cisco gateway, but on TDM switch every digit is duplicated. Is it possible that the carrier sends inband along with rfc2833? Kind

hi there I'm setting up asterisk@home and I'm using Polycom IP 500 phones. When I call a number that has a digital receptionist (i.e. "dial 1 or such and such, dial 2 for this and that...") the Polycom doesn't seem to send the extra digits. When I try it with X-Lite things appear to work fine, so I think the problem is with the Polycom configuration. Here's some

Hello! I'm still wondering, how to park a call with an ISDN line. The setup is the asterisk server only, controlled via the CLI. I can originate a call and I can tell asterisk to start the JACK application. But I can't then park the call. I tried it with sending DTMFs with misdn send digit, no luck. I had a look at the CLI, but didn't stumble upon a command to park the call.

Hi all, Still having the one way sound problem. Any suggestions how to hunt the problem down ? Regards, Thorsten --------------------------------------------------------------- Hi all, We have a very basic * installation for testing purposes. The * is connected to PSTN with BRI and setup with X-Lite over plain lan. (local IP's) OS: Linux/Debian unstable. Asterisk CVS-10/29/03-23:46:26

Apologies if there is a cleanly written and searchable FAQ that I could be directed to. I have no problem to RTFM if I can find the FM... Does Asterisk currently operate under RH9? I have IBM Netfinity 4000R servers that do not support X windows under RH8.x and I prefer not to go back to RH7.3... BTW, where would I find a useful FM? David -- David J. Sussman, MBA email: