similar to: canreinvite yes or no for PBX

Dear all I have small lan and i have configure hardphone with my asterisk with one E1 PSTN line now i have configue to use canreinvite=yes in sip.conf If i user conreinvite=no then my RTP goes throgh asterisk means asterisk come in media path and if i user conreinvite=yes then RTP path would be sip phone to sip phone ??? My all phone in LAN not behind the NAT so guessest

Hello list, I am trying to solve a problem and after unsucessfully chasing forums and google for some hours, I turn to you in hope of a solution. I feel it's just a configuration issue but I just can't get my head wrapped around it. The situation is basically this: I have an Asterisk connected to an Alcatel OmniPCX via SIP. Asterisk only ever does SIP and has no dedicated hardware

hi: our current connection is below: sip phone<--->asterisk<---->alcatel PBX<---->PSTN asterisk and alcatel PBX is connected via E1 isdn-pri. when I use sip phone to dial outside PSTN world: 1. with 1.4 it is fine. 2. with 1.6.2, I need to set prematuremedia=no is sip.conf. or sip phone can not hear the ring and the beginning of the PSTN voice. 3.

I need to change the sip port from 5060 to 5061 actually we already used 5060 for proxy to sip any idea to change 5060 to 5061 so all can acces the sip using this port please help........................ On 4/8/11, asterisk-users-request at lists.digium.com <asterisk-users-request at lists.digium.com> wrote: > Send asterisk-users mailing list submissions to > asterisk-users at

Has anyone made this work? For me everything is fine until I switch canreinvite form no to yes. What happens is that asterisk hangs on "attempting native bridge" ... from what I understand "attempting native bridge" means that the RTP is routed through asterisk (just without any codec translation) But it shouldn't do that ... right? ... canreinvite is set to yes ...

Hi all, I am trying to use canreinvite in sip.conf and park/pick up calls at the same time. Problem: When I have it set up so RTP goes through asterisk (sip.conf: canreinvite=yes), # to xfer works fine. But, when I set it up so the RTP goes direct between endpoints (sip.conf: canreinvite=no), the # to xfer doesn't work. I believe this is because asterisk isn't in the RTP path and

2009/2/5 Olivier <oza-4h07 at myamail.com> > Hi, > > Here http://www.voip-info.org/tiki-index.php?page=Asterisk%20T.38 is a > table listing ATA/Gateways combinations. > Could anyone successfully set a Patton M-ATA to work with another one, > using Asterisk 1.4 ? > > Is reinvite (canreinvite=yes) necessary or not ? > > Regards > > Replying to myself, I

Hey Guys! I am getting this wired error when i am calling IAX trunk. Everything works! but i want to get rid on these RED WARNING messages.. what is wrong here ? I have func_aes.so module loaded. also i remove and test but still same error. -Satish == Using SIP RTP CoS mark 5 -- Executing [7623 at from-sip:1] Macro("SIP/7527-0000000d", "orasebcamdial,7623") in

Hello, I need to test canreinvite=yes with 2softphones and 1 asterisk. I want to have that : http://www.panoramisk.com/wp-content/uploads/2007/05/asterisk-call-flow-outb ridge.png But I have that http://www.zimagez.com/zimage/canreinvite.php Canreinvite=yes work for all phones or just asterisk?... Can you help me? Thank you -------------- next part -------------- An HTML

Alex, Thank you so much for your response. I've been so consumed with other business that I only just now getting back to this issue. We have implemented your suggestion which is perfect. Thank you again. I've never asked a question of the community before and I'm extremely happy with the rapid response I received. Somewhat related to this initial problem I have an additional

Is AbsoluteTimeout designed to work with canreinvite=yes? If not, are the any other options for disconnecting a call after a predefined duration when using canreinvite=yes? Thanks! David

Hi All, Currently I have voice calls from a certain SIP peer coming into an asterisk server where the specific [SIP] channel is set to 'canreinvite=no'. I would like to enable reinvites for certain calls, matched on DID. So I'm wondering if there is a mechanism in the dial plan to turn on/off reinvite capability or will every call on this channel be forced to use the SIP peer

Am I reading the data below incorrectly, or does it appear that even though I have the directive canreinvite=no set for the two asterisk boxes, they are trying to do a reinvite (which fails) anyway? Is this expected behaviour in this situation? If so, how can I prevent this? ---- Lots of output ---- Using CVS Head from 2005-08-28, I have two asterisk boxen, one (box A) has a sip ua (2608)

I'm trying to get canreinvite=yes to work. I would like asterisk to release the line and let the 2 ports on the sipura device to talk to each other directly. Is there a setting I need to activate on the sipura device, or is there something else I need to do? It's possible that it is a nat problem as the sip device is behind a firewall, but it works fine otherwise. Any suggestions?

Can anyone give an example of the difference between the following: canreinvite=no canreinvite=yes canreinvite=update Here is the problem: I have an 800 number sent to me via SIP from a national carrier. Asterisk gets the number and rings my desk phone. Asterisk has 2 NICs, one with public IP and private IP. My phone is on private IP, the inbound call is on public. My phone rings and I answer

Hi, I can not get this working: Asterisk on public IP. Two SIP phones behind NAT - in the same LAN. I works perfectly (two way sound) when each peer (friend) can not reinvite - audio stream goes through Asterisk. The problem pops up when I define canreinvite=yes on each peer definision so I suppose to stream audio directly between phones (in the same local LAN). Right after called party

Hi, Here http://www.voip-info.org/tiki-index.php?page=Asterisk%20T.38 is a table listing ATA/Gateways combinations. Could anyone successfully set a Patton M-ATA to work with another one, using Asterisk 1.4 ? Is reinvite (canreinvite=yes) necessary or not ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Sorry for this "newb" question (but maybe a newb question once in a while is ok): What's the current state about Asterisk handling DTMF features via SIP INFO (dtmfmode=info) even when the media path has been reinvited (canreinvite=yes) to go directly from one phone to another? Somewhat related to this suspended issue: https://issues.asterisk.org/view.php?id=14126 How widely

For canreinvite=yes to work, I think I need to remove the t argument in the Dial(SIP/ext|60|t) application. Otherwise, Asterisk will allways stay in the middle. I don't want that, so I removed the 't' argument. That works. Now, when two UA are calling, Asterisk gets out of the RTP stream. However, when removing the 't' argument, the Music On Hold doesn't work anymore

Hey Guys! I have two asterisk 1.8.3.2 same version on both machine but why one asterisk has "reload" command but other doesn't ? satish-desktop*CLI> core show version Asterisk 1.8.3.2 built by root @ satish-desktop on a x86_64 running Linux on 2011-03-25 16:10:39 UTC satish-desktop*CLI> re <tab><tab> realtime reload shirley*CLI> core show version Asterisk