similar to: Fwd: Re: Asterisk as a Condo door opener/intercom

> From: "James Bean" <james@hdcs.com.au> > Has anyone every setup an external open/close relay, off say a serial > interface, and have an extension trigger the relay? The following will do the trick. Just add a 5vdc solid state relay ('cause you can't sink too much current out of the RS232C port). Substitute "2", "4" or "6" in the

Hello All, Doing a make distprep doesn't seem to work anymore: $ make -f Makefile.in distprep make: @SH@: Command not found make: *** [catman-do] Error 127 I've seen this on AIX & Redhat (gnu make) and Solaris (native make). I suspect this occurs on most platforms. Is this still the recommended way of autoreconf'ing CVS releases for building? -Daz.

Hi, on my system (Linux 2.6.18.8 - ia64), if a domain write on the xencons before xenconsole is initialized the domain gets back what it wrote. This patch fixes this issue by making raw the pty slave very early. (I suppose it doesn''t happen with linux as a guest because it takes a little bit of time before writing to xencons). Tristan. _______________________________________________

OpenStep, apparently, does not initialize new pty/tty modes to a sane default. I'm thinking this code snippet, added to tty_parse_modes() before the for(;;) loop should suffice: #ifdef HAVE_NEXT tio.c_oflag |= ONLCR; tio.c_lflag |= ECHO; #endif /* HAVE_NEXT */ Also, I've noticed that "ssh -t next_host stty" gives different output than an interactive session to the same

Hi Everyone, Looking to replace a condo intercom system. Apparently the current one taps into the lines and dials phone numbers but needs to be changed as it's faulty. I will probably still use the same analogue dialing and back it up with a VoIP line and use the current cabling that is in place. But as for as the door opening function goes, I am not sure how to interface and how open these

Add usb-ver format check to "usb-hc-create". In original file, "usb-hc-create" allows usb-ver parameter as "2/2.0/2.0aaa". In low level hc create, it only uses the integer part (that is "2"), so there is no problem. But 2/2.0/2.0aaa will be saved into VM config. After that, while doing "usb-list", it cannot handle "2.0/2.0aaa" and will

I'm not a ssh expert and I don't know if the log is good or bad, but I too am running OpenSHH under OpenServer. I find that after I connect, the return key has no effect unless I first type: stty sane <Ctrl>j If you've hit <ENTER> before that you must first press <Ctrl>j a couple of times to clean out the buffer. After I type the above command, everything

Well, I decided to get ROSH back out and try to get it functioning in Syslinux-4. As has been my habit, I first recompiled the Linux binary and tried it out. In the beginning of ROSH, it calls console_ansi_std(). When I was working on this in the past, using this function ensured both the Linux and the Syslinux/COM32 binaries function similarly. When using fgets() to get an input string in the

a customer of mine needs a UPS capable of supporting a small server in his office. Obviously, nut is a good thing for him for clean shutdown etc. especially with the crappy quality power in his office condo. I wanted to purchase an MGE UPS but it looks like they purchased APC and are now flogging that product line. Now, I've never been happy with APC. I have an APC 3000 (sans

hello short description: ssh client sends a wrong all-zero terminal info when requesting forced pseudo-terminal allocation while stdin is not a terminal. sshd then sets the terminals ospeed to 0 because it receives this information from the client. on solaris this means that the pseudo-terminal is closed and output of any remote command is dropped. longer description: what we're doing is

I have an application that talks to hardware via the serial port. (Actually, it talks to a lot of hardware, banking peripherals). The app runs on both Win32 and OS/2. Of course, the main theme is porting the thing natively to linux (and I'm working on that). But just for fun I tried to get it to work with WINE, and while the "device emulation" works perfectly (much to my

Hello all, I''m after a junior to mid rails developer for maintenance work on an existing website. This is a legacy application which requires some small ongoing love and new features over time so you''ll need to be able to do ongoing work. You''ll need to be familiar with Rails 2.3.x and MySQL - we also have an (outdated) rspec + cucumber test suite which over time will

I used screen scraping to extract some information and put it into a table called tbl. Now I want to modify the table a bit so the data can be more useful. Here's the code I used: library(XML) rm(list=ls()) url <- "http://webapp.montcopa.org/sherreal/salelist.asp?saledate=05/25/2011" tbl <-data.frame(readHTMLTable(url))[2:405, c(3,5,6,8,9)] names(tbl) <-

http://bugzilla.mindrot.org/show_bug.cgi?id=282 Summary: ttymodes sent can be invalid Product: Portable OpenSSH Version: -current Platform: ix86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: Miscellaneous AssignedTo: openssh-unix-dev at mindrot.org ReportedBy: todd

We are in the process of migrating one of our embedded apps to use uart by default instead of sio in RELENG_7 in prep for the day when sio eventually disappears. Unfortunately, the application doesnt want to work with uart with puc backed devices, but still works with sio. Stranger still, the app works with the uart driver when uart attaches to the built in com port on the isa bus. However,

Since upgrading to cygwin 1.7.x, I'm unable to complete rsync jobs to a Debian machine (running stable). cygwin rsync is 3.0.6; Debian is 3.0.3. The transfer goes for a while and then just gets stuck halfway through an arbitrary file. If I cancel and restart, same thing (but gets a little further). If I manually copy the file in question, it will usually go a bit longer and then get stuck

In a discussion a few weeks back, it was mentioned that the Best Practices Guide says something like "Don''t put more than ___ disks into a single vdev." At first, I challenged this idea, because I see no reason why a 21-disk raidz3 would be bad. It seems like a good thing. I was operating on assumption that resilver time was limited by sustainable throughput of disks, which

This is about 90% of the core work. I omited a few files from the patch set since they are basicly small blocks of #ifndef HAVE_NEXT/#endif to get it to compile. Daimen, feel free to let me know what you applied and what your rejecting and why.. so I can work on cleaning things up. Andre, Only thing of note you may want to look into is NeXT does not use "ut_user" in it's lastlog.

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

I HAVE 10 Years EXPERIENCE WITH *ORACLE 7.x 8.x, and 9x DATABASE Administration *ORACLE 9iAS Support *11i/10.7 ERP/CRM Installation and Support *SOLARIS SYSTEM ADMIN *3rd PARTY IMPLEMENTIONS * DATAWAREHOUSING Support *SOFTWARE AND HARDWARE CAPACITY PLANNING *Oracle DATABASE MANAGEMENT *Oracle DATABASE AND APPLICATION TUNING Spent many years at Oracle Corp, and worked with client such as Kodak,