similar to: Asterisk codec negotiation and canreinvite=no

Hello list, I'm trying to set up a video call from my Ekiga client to a Grandstream GXV3140 IP-phone. The call succeeds but there is no video. I have in sip.conf : videosupport=yes disallow=all allow=alaw allow=g726 allow=g729 allow=gsm allow=h261 allow=h263 allow=h263p allow=h264 The Grandstream peer has codecs (sip.conf) : gsm;alaw;g729;h261;h263;h263p;h264 The Ekiga peer has codecs

Hi, we have 4 asterisk, versions are 1.4.35 1.4.36 1.6.2.18 and 1.4.42 One GrandStream GXV3000 is used for the tests. He is registered to asterisk 1.6.2.18 asa well as 1.4.35. Calling echo test is OK on both servers, get audio and video. Calling echo test from asterisk 1.4.36 bye a SIP trunk from both others servers is also working well. What fail, is video on echo test from asterisk 1.4.42

I've tried to put a call file to /var/spool/asterisk/outgoing/ to make an outgoing video call, but not succeeded. I could hear the audio, but no video. The asterisk version is 1.4.10, with videosupport=yes The client is eyebeam 1.5.7, with h263 support. Here are some debug messages. It shows the client and asterisk negotiated the video capabilities without problem. However, the 'show

I am configuring a test Asterisk server (1.8.9.2) to practice setting a single codec globally, to avoid transcoding as much as possible. Since all of my recordings are in gsm format, I am trying to make the SIP clients use gsm everywhere. I am using Ekiga on Fedora 16 x86_64 for my tests. [root at elx2 asterisk]# cat /etc/asterisk/sip_general_additional.conf

Hi, I tried to turn on Video and get the following cli-WARNING output -- Executing [8600 at outgoing-kamailio:1] Answer("PJSIP/7000-00000000", "") in new stack > 0x7f46f41ff2e0 -- Probation passed - setting RTP source address to 192.168.8.203:17200 -- Executing [8600 at outgoing-kamailio:2] ConfBridge("PJSIP/7000-00000000", "8600") in new stack --

Hi, We can't read the messages in our mailbox always getting -- <SIP/tootaiAUDIO-00000001> Playing '/var/spool/asterisk/voicemail/default/100/Old/msg0002.slin' (language 'fr') [Oct 11 13:24:50] WARNING[26778]: app_voicemail.c:7802 play_message: Playback of message /var/spool/asterisk/voicemail/default/100/Old/msg0002 failed As you see Asterisk try to read

Hi all, I am using to Xlite to save video voice mail. when i retreive it, then only video show , no voice is here out. Plz tell me where ,i am wrong , and how i can able to see video plus here audio in voice mail box. I did following configuration In Sip.conf videosupport=yes [phone1] type=friend host=dynamic context= employees mailbox=101 at default

Hi all Maybe somebody has an idea. I'm tracing a very strange phenomena... I've a connection from Asterisk to a SIP PBX. Most calls have a caller ID. Some International calls don't have any. Now it looks like those calls without caller ID never get to the context where incomming calls from this SIP PBX should get to.... Examples: Call with Caller ID: (slightly anonymized)

how do i troubleshoot no ring tone. It was working and all i added was the lines below now it doesn't ring. Edit sip_nat.conf for proper NAT: localnet=192.168.1.0/255.255.255.0 externhost=pbx.DOMAIN.com (Set your external hostname name here) externrefresh=10 fromdomain=DOMAIN.com (Set your external domain name here) nat=yes qualify=yes canreinvite=no Add extra codecs to

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

So the call used Alaw as Codec. > Am 13.06.2020 um 17:23 schrieb Luca Bertoncello <lucabert at lucabert.de>: > > Am 13.06.2020 um 13:47 schrieb Michael Keuter: > > Hi > >> Try "sip show peer <peername>" for a phone. > > So: > > mobile phone: > bpi*CLI> sip show peer 0049177xxxxxxx > > > > > * Name :

Hello, everybody: I'm developing an application using Asterisk and a TDM-400 card. I understand the concept of the difference between GSM and WAV files when using Asterisk, but I'm not happy with the sound quality with the GSM compression. It's merely *acceptable* for a telephone call, but for anything else, it leaves something to be desired. Case in point -- if you compare the

Hi list, something crazy here. 2 asterisk on 2 different place (1.4 and 1.8) both having an extension [115], one as type peer (caller side 1.4) and one as friend (callee side 1.8). Phones from both location connect to Asterisk from LAN. Router are Linux boxes. Connection between the 2 sites is done like this: On the callee side [115] ;callee type=friend host=dynamic secret=otherSecret

Dear sir, I got trouble on InnoMedia video phone with Asterisk-1.2.4. If InnoMedia video phone as a caller, then the call will be a success, no any problem. The problem happens: If InnoMedia video phone to be a callee, the call can not make successfully. For instance, Caller 23267668 dialed to callee 23267663, callee 23267663 was ringing. If I picked up the callee's phone, then abnormal

Hello Asterisk-Community, I'm having an error with my BLF configuration on my asterisk...i've configured the sip peer like this: [8250] type=friend callerid=Extensi?n 8250 <8250> canreinvite=no context=pbx9 dtmfmode=rfc2833 host=dynamic insecure=no language=es nat=yes pickupgroup= callgroup= qualify=2000 secret=cyx2mo type=friend username=8250 subscribecontext=pbx9 call-limit=100

Hello Asterisk-Community, I'm having an error with my BLF configuration on my asterisk...i've configured the sip peer like this: [8250] type=friend callerid=Extensi?n 8250 <8250> canreinvite=no context=pbx9 dtmfmode=rfc2833 host=dynamic insecure=no language=es nat=yes pickupgroup= callgroup= qualify=2000 secret=cyx2mo type=friend username=8250 subscribecontext=pbx9 call-limit=100

On Saturday 13 June 2020 at 17:23:14, Luca Bertoncello wrote: > Am 13.06.2020 um 13:47 schrieb Michael Keuter: > > > Try "sip show peer <peername>" for a phone. > bpi*CLI> sip show peer 0049177xxxxxxx > Codecs : > (alaw|ulaw|ilbc|g729|g723|gsm|amr|amrwb|g726|g726aal2|adpcm|slin|slin|slin| >

Sorry -- I goofed on the sample rates! Apologies! Hello, everybody: I'm developing an application using Asterisk and a TDM-400 card. I understand the concept of the difference between GSM and WAV files when using Asterisk, but I'm not happy with the sound quality with the GSM compression. It's merely *acceptable* for a telephone call, but for anything else, it leaves something to be

I try to get H323 to run, but have so far only partial success: There is a Gatekeeper GK, where asterisk connects to. The Gatekeeper sees Asterisk, and Asterisk sees the gatekeeper. From the Network on the GK, asterisk is reachable via the number 070333333. I have an extension on asterisk 6002, which is reachable. I try to call a number attached to the gatekeeper (070168177) with the

Am 13.06.2020 um 13:47 schrieb Michael Keuter: Hi > Try "sip show peer <peername>" for a phone. So: mobile phone: bpi*CLI> sip show peer 0049177xxxxxxx * Name : 0049177xxxxxxx Description : Secret : <Set> MD5Secret : <Not set> Remote Secret: <Not set> Context : default Record On feature : automon