similar to: call parking issues in asterisk 1.6.2.16.2

hi. i am running asterisk 11 and i am stuck with the feature codes. how do i setup them. Now the system has. PBX*CLI> features show Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # # Attended Transfer One Touch Monitor Disconnect Call * * Park Call One Touch MixMonitor Dynamic Feature Default Current --------------- ------- ------- (none) Feature

Hello, Recently we have been using asterisk 1.6 and everything worked ok, all our productions server are 1.6. Recently we have upgraded one to 1.8 and multiple parking call are not working, which worked pretty ok on asterisk 1.6. Are there any major changes in asterisk 1.8 related to park call and multiple parking lots. Bellow is my config from asterisk 1.6 which worked, I`ve tried this in 1.8

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

Ok, After following BJ's advice and removing ogg.so I then got a pbx_realtime.so error in the same fashion. I removed that file, and then the next and then the next as you can see in the log below. I think something is not right. duh here is my sign..lol...but I am not sure even where this ast_register_file_version flag is in a config file or what step I have missed. I am doing a VOIP only

I have an issue with call parking and hope there is some undocumented feature for this. ;-) We are replacing our legacy PBX with asterisk, but to save money over time (handsets and network), I am trying to maintain the use of our legacy PBX. Asterisk extensions can not use the call parking features (not usable over trunk cards) of the old PBX, so I have to get the old PBX to use asterisk's.

Asterisk Version: 1.8.1.1 Problem: Multiple Parking Lots Issue: Not redirecting to the right parking lot. Always uses the first parking lot from "parkedcalls show" or "features show" Asterisk Working Version: 1.6.1 Steps Taken: In features.conf added: [parkinglot_test] context => parkedcalls-test parkext => 700 parkpos => 701-710 parkingtime => 120 findslot

Is anybody using Mitel phones? It appears that when you page a Mitel phone using asterisk's MeetMe, the paged phone will hang up the call its on to take the page. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110621/764a6fa9/attachment.htm>

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

Is there a way for asterisk's voicemail to send an email (including voicemail attachment) to multiple email addresses? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110408/8908db5f/attachment.htm>

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

Is anyone using asterisk with fail2ban? I have it working except it takes way more break-in attempts than what is set in "maxretry" in jail.conf For example, I get an email saying: "The IP 199.204.45.19 has just been banned by Fail2Ban after 181 attempts against ASTERISK." when "maxretry = 5" in jail.conf Perhaps someone else is experiencing this or has resolved it,

Is there an easy way to setup diaplan so when someone pushes a digit such as * during a call, they will be transferred to another destination. For example, a caller is hearing ringing while calling a UA, but instead of waiting for the UA to pick up, they can push * and go directly to that UA's voicemail. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello folks, I'm running 1.8.11 on a Centos 6 system with an adjacent Hylafax server using softmodems: Noticed this in the Asterisk log when trying to send a fax from Hylafax to Asterisk: [Apr 3 01:53:09] WARNING[29184]: chan_sip.c:8926 process_sdp: Multiple audio streams are not supported I've googled a few asterisk tickets that may suggest that yes, multiple audio streams are not

Hello, I have enabled call parking and it works great. However, when the "hold time" hits the "parkingtime", the extension that parked the call is called back. The problem is, if that extension does not pickup the returning call, the call gets dropped. Is it possible to get Asterisk to automatically park the call again if the callback isn't answered? Quite

My company for various reasons has asked that I come up with a way to have previously parked calls be re-parked in the same parking slot. I have looked at setting up asterisk so that the receptionist chooses which slot to place a call, but I think there is an easier way. That is when I came up with the idea of "Sticky Park". Here is how it would work. A call would come in and

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

I am having trouble getting park to work with SIP, I have these config files: /etc/asterisk/parking.conf [general] parkext => 8540 parkpos => 8541-8555 context => parkedcalls parkingtime => 45 /etc/asterisk/extensions.conf include => parkedcalls include => default [default] exten => 3874,1,Dial(SIP/3874|20|tT) Do I need something else somewhere? Is anyone using park and

Is there a way to disable all SIP registration and block any requests? The reason I'm asking is this particular Asterisk server will just be originating calls. I've noticed sip attacks where the attacker attempts to register a user 100x per second causing CPU to rise significantly. -------------- next part -------------- An HTML attachment was scrubbed... URL:

The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4. These releases are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/releases The releases of Asterisk 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and

The Asterisk Development Team has announced security releases for Asterisk branches 1.4, 1.6.1, 1.6.2, and 1.8. The available security releases are released as versions 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and 1.8.2.4. These releases are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/releases The releases of Asterisk 1.4.39.2, 1.6.1.22, 1.6.2.16.2, and