similar to: why does "core show channels" on 1.8 not show the channel

I used my cell to call in and create a CDR record here from asterisk 1.4.43: "","317XXXXXXX","s","default","""GEIS JERRY "" <317XXXXXXX>","DAHDI/23-1","","BackGround","SM_ATTENDANT","2012-01-05 18:12:09","2012-01-05 18:12:10","2012-01-05

Hi, I have some servers that are dedicated to do meetme conferencing. From some previous test i concluded that I need to use dahdi_dummy as it is more accurate. If I did use the core timers in dahdi (not loading dahdi_dummy) I got bad quality in the conferences and dahdi_test showed 99.6% as worst. I thought maybe the issue as bad hardware for the timing or something else. But today I

When I do "core show channels concise" over the AMI interface how do I specify that I want to see the "actual" channel number like DAHDI/4/xxxxxxx where 4 is the actual channel. RIght now I am seeing DAHDI/i1/xxxxx where i1 is the span. Thanks, Jerry

With 1.6.1, I'm trying to set up a test of meetme for creating dynamic conferences. cat meetme.conf [rooms] conf => 600 extensions.conf: [meetme] exten => 2663,1,MeetMe(,D) exten => 2663,n,Hangup() exten => 2666,1,MeetMe() exten => 2666,n,Hangup() What I'm expecting is to dial 2663, get a conference room number ( 600, I suppose since it's the only room ), and set

I have followed the instructions in Asterisk The Definitive Guide 4th edition. ?Once I load DAHDI I run the dahdi show channels command and get no such command. ?I have setup all the conf files. ?I compiled DADHI prior to Asterisk. Any ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list, we have 2 asterisk boxes in VM (kvm) on 2 different Dell servers, one is Lenny kernel 2.6.26 asterisk 1.6.2.20, the second CentOS 2.6.18 asterisk 1.4.36 (Elastix). Both 64bits, no hardware involved, dahdi on both machines for meetme timing. Doing core show translation give on the Lenny server Translation times between formats (in microseconds) for one second of data

Hi, I have a X101P card and am running Asterisk SVN-trunk-r226890. The X101P card seems to be identified properly: debian:/usr/src/dahdi-tools# dahdi_hardware pci:0000:01:01.0 wcfxo+ e159:0001 Wildcard X101P debian:/usr/src/dahdi-tools# dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r7409 DAHDI Version: SVN-trunk-r7445 Echo Canceller(s): MG2 Configuration ======================

Hi! IIRC there was an announcement some time ago that it is possible now to make conferences without the need for DAHDI anymore - but I can not remember the name of this feature anymore, and google didn't solved my problem. Thus, any references to this new system are appreciated. thanks klaus

We just finished an upgrade of our Asterisk system to an HA environment on a pair of servers using Linux-HA. As part of the upgrade, we also moved to Asterisk version 1.8.4.3 Most things are working quite nicely on the new system. However, I?m having trouble getting a paging feature to work. In Asterisk 1.4, we simply used the Page() application like this:

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#

On Tue, Apr 26, 2016 at 11:07 AM, Administrator TOOTAI <admin at tootai.net> wrote: > Le 26/04/2016 17:23, Mamadou NGOM a ?crit : > >> Hello, >> >> >> Having installed DAHDI to be able to use the meetme() application , when >> I start the dahdi service it generates me the following error: >> >> -bash: /etc/init.d/dahdi: No such file or

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Days ago I bought a OpenVox A400P card with a port FXS and another FXO that I am testing with my Asterisk installation in my house. I'm using Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on Debian GNU/Linux Lenny. I was reading "The future of telephony" and this [1] document looking for information about

Hello All, Asterisk: 1.8.13.0 Dahdi : 2.6.2 Kernel : 2.6.32-431.3.1.el6.i686 #1 SMP Fri Jan 3 18:53:30 UTC 2014 i686 i686 i386 GNU/Linux OS : CentOS 6.4 When I show meetme room details using "meetme list" command it shows Minus in activity column. Any Idea. >meetme list Conf Num Parties Marked Activity Creation Locked 54682 0002 N/A

Hi, I'm running a test system with Ast 11.7 and DAHDI 2.9.0. I loaded a TE205P card. Then I enter asterisk console, and once I do a "pri show channels", the console no longer works correctly. There's no output for any command after that. If I type "pri show" and hit tab for completion, console freezes there, I need to kill session. Any hints? new bug? known issue?

Hi, I need a feature from asterisk with dahdi channels, if there is an incoming call, it should ring on several dahdi channels. My channels look like: OFFICE1=DAHDI/13,,rtT OFFICE2=DAHDI/14,,rtT If I add this line: exten => 12345678,1,Dial(${OFFICE1}&{OFFICE2}) only OFFICE1 rings. If I change it to exten => 12345678,1,Dial(DAHDI/13&DAHDI/14) DAHDI/13 and 14 rings together,

Does anyone know what this error message means? Unable to create channel of type 'DAHDI' (cause 0 - Unknown) I've upgraded to 1.6.0 with dahdi 2.0. For some reason my outbound dahdi calls are not going through. At some point, it starts to work, but I don't know what the trigger is. Out of the blue, outbound calls start to work. I had been using asterisk-1.6-beta9 with zaptel

I'm attempting to convert from ZAP to DAHDI with 1.6.0. I was using 1.6.0-beta9. I followed the directions I could find. I moved /etc/zapata to /etc/dahdi/system.conf I moved /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf I don't undestand how to deal with extensions.conf? I replaced Dial (ZAP/ ...) with Dial (DAHDI/ ... ) All my inbound calls from DAHDI work the same as

Hi All, for a vicidial server which uses only voip, which is the minimum telephony card which would provide the required clock timing source for conferences to work properly ? Maybe the Digium TDM410PLF card without any daughter card would do the job ? Thank you very much for supporting. Have a nice week-end, Mike

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,