similar to: [1.6/Ubuntu] What packages for * + Dahdi?

Hello About every three months, my dad's little Asterisk server that handles his business phone line with an OpenVox PCI card stops taking calls. To check if it's the cause, I'd like to run a CRON job every night to restart Zaptel and Asterisk. Before I go ahead, I'd like to know if I can just send the following commands, or if there are issues I should know about:

Hello, I'd like to run Asterisk on an embedded device, where space is scarce. It should be able to handle calls from a VoIP provider in SIP, calls from the PSTN through Dahdi, and voicemail. If someone's already done this, I'd like to know which directories/files are required for a basic install? Does this look right? ================= /bin/asterisk /etc/asterisk/ asterisk.conf

Hi, Xorcom astribanks get initialized straight on when using Ubuntu 11.10 packages but I am having a hard time to get the same result running in a qemu/libvirt image. The first difficulty is that astribanks devices get different usb device ids during their initialisation process, requiring hot plug support. I have figured out how to solve this issue using the technique described in this post :

Hi to all, I am searching to make work an Asterisk, with an ISDN card with Cologne Chipset. Here is the lspci: 01:09.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus master, medium devsel, latency 16, IRQ 5 I/O ports at c400 [size=8] Memory at fdefd000 (32-bit,

I have an i686 cpu and when compiling from source I get this error: touch /usr/src/dahdi-linux-2.2.0/drivers/dahdi/xpp/init_fxo_modes.verified Building modules, stage 2. MODPOST WARNING: could not find /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32. o.cmd for /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Anyone else seeing this?

CENTOS 5.5 dahdi 1.4.3.0.1 uname -r 2.6.18-194.3.1.el5PAE [root at localhost dahdi-linux-2.3.0.1]# service dahdi start Loading DAHDI hardware modules: FATAL: Module dahdi not found. wct4xxp: FATAL: Module wct4xxp not found. [FAILED] wctc4xxp: FATAL: Module wctc4xxp not found.

Hi all, I was using dahdi 1.6.2.0.9 version for a long time. We decided to upgrade to 1.6.2.22 a few days ago. After that we started to have some problems with dahdi channels. PS:DAHDI Version: 2.6.0 Echo Canceller: HWEC, MG2 We have 2 PRIs between Ericsson pbx and asterisk and a sip trunk for outside calls. At begining everything works fine but in a few hours, calls from asterisk to ericsson

Hello, # rpm -qa | grep kernel kernel-headers-2.6.18-274.18.1.el5 kernel-PAE-2.6.18-128.el5 kernel-devel-2.6.18-274.18.1.el5 kernel-PAE-devel-2.6.18-274.18.1.el5 [root at localhost ~]# uname -i i386 Trying to install dahdi-linux-complete-2.3.0.1+2.3.0 on CentOS but get below error. Can you please assist in this? [root at localhost dahdi-linux-complete-2.3.0.1+2.3.0]# make make -C linux all

When I do a service dahdi stop I get an error message: Unloading DAHDI hardware modules: execvp: No such file or directory the modules remain loaded. I dont know what to do with this??? Anyone else? I am running centos 4.4 2.6.9-42 This box ran 1.2 with zaptel fine. Jerry

Hello, After all these years installing from source, I'm giving Dahdi package installation a try on a recent Stretch box. Google over the web, I didn't find too many doc on this topic. 1. Is this one [1] up-to-date ? Reading Stretch I would say a single asterisk-dahdi would be enough to install asterisk dahdi and libpri. 2. On my box, the following fails. What would you suggest ?

After a reboot, I can't reproduce the problem anymore which is quite frustating. 2011/6/14 Tzafrir Cohen <tzafrir.cohen at xorcom.com> > On Tue, Jun 14, 2011 at 03:44:32PM +0200, Olivier wrote: > > Hi, > > > > I'm using a two-years old installation script for the first time on a > > Squeeze (linux 2.6.32) platform. > > For an unknown reason (might

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Hi. I am using gentoo kernel 2.6.27-r2 and dahdi trunk svn 5211 and it will not compile with this kernel whereas it does compile with 2.6.25. Here is the relevant portion of the build: VERIFY /usr/src/dahdi-trunk/drivers/dahdi/xpp/init_card_1_30 VERIFY /usr/src/dahdi-trunk/drivers/dahdi/xpp/init_card_2_30 VERIFY /usr/src/dahdi-trunk/drivers/dahdi/xpp/init_card_3_30 VERIFY

Hello Friends, I am trying to Installl dahdi on amazon EC2 which have Open-SUSE-11.1 X86 version. and here is snap of uname- a command *Linux ip-10-160-86-41 2.6.32.19-0.3-ec2 #1 SMP 2010-09-17 20:28:21 +0200 x86_64 x86_64 x86_64 GNU/Linux* when I try to run DAHDI distribution dahdi-linux-2.1.0.4 I am getting following error *echo "You do not appear to have the sources for the

Hi, I am running Fedora 7 VM. On an earlier configuration with zaptel and Asterisk 1.4.21 , meetme worked alright. I upgraded to Dahdi and Asterisk 1.4.26, and the result is choppy sound via Meeme, while a simple Musiconhold works OK with descent audio quality. So I am sure its a Dahdi_dummy problem. Running dahdi_test gave me very poor results. Opened pseudo dahdi interface, measuring

Greetings list, I've compiled and installed dahdi countless times on standalone machines, but recently I've been trying to compile Dahdi in a Xen DomU without much success. The errors I'm seeing are as follows: /var/tmp/portage/net-misc/dahdi-2.3.0.1/work/dahdi-linux-2.3.0.1/drivers/dahdi/zaphfc/base.c:1689: error: 'modes' undeclared (first use in this function)

Hello List, I have found that asterisk supports only forwards in-dialog MESSAGE method. That is, if the MESSAGE method is sent within an active call. But according our requirement we need to send MESSAGE method to the other leg without being in a call (general stateless proxy forward). Is it possible to do this in asterisk using some tricks? Regards, Rajib Deka SIEMENS Ltd. Robert V Chandran

Hi, I've been building a new Asterisk server to replace my previous one, all using the latest 1.4.x downloads from asterisk.org. I can't even get to the point where dahdi works. I have libpri, dahdi and dahdi-tools compiled and installed. I have no hardware on that new server, but I am installing Dahdi for timing source for meetme. Everything compiles seemingly well, but this is

Hi, I'm using a revision 6822-enabled Dahdi-Tools (see https://issues.asterisk.org/view.php?id=13897) with a Junghanns QuadBRI. 1. Do I still need qozap driver ? If positive, how is it recommended to get it ? 2. Which line should be included in /etc/dahdi/modules to have the appropriate driver loaded ? 3. The process I'm planning to use is : A- Hand edit /etc/dadhi/modules,

I did an svn check out of dahdi. I am running centos 4.7 on the make all I get an error. /usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile: No such file or directory make[4]: *** No rule to make target `/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile'. Stop. make[3]: *** [/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp] Error 2 make[2]: ***