similar to: [1.8] Unable to Register: Registration denied because of contact ACL

Greetings, I've noticed a problem that might originate from my Asterisk configuration, could use a hand in sorting it out. Problem is a 488 response from Asterisk whenever it gets RTP/SAVPF profile in the SDP. My current setup has Asterisk Kamailio realtime integration, and Kamailio uses dispatcher to route calls for Asterisk to handle. Now I have only one Asterisk, on the same machine as

Hello, I'm trying to get calls working between websocket clients and sip clients. For clients I have sip.js based clients on chrome, Zoipers and a Grandstream phone. Challenge here is I'd like to have Kamailio and rtpengine to handle the bridging between different rtp profiles but Asterisk changes them in the sdp bodies along the way. I'm using Asterisk 11.11.0. Is there a way to

Hello, I have a problem with a call between 2 webrtc clients. Asterisk removes the ice-related lines from the sdp when it sends the INVITE out, and the called webrtc client rejects the INVITE due to the missing ice lines. Both webrtc clients are defined exactly the same way, same values in all fields except the number of the peer. There's probably something I've changed that causes this

Hello list, I would like to seek your expert opinion on a setup I am trying as part of my research. I have not been able to successfully make a call so far. In my setup, I use two laptops that are interconnected by means of a stand-alone IS1581 switch. Thus there is no LAN involved. I have assigned static IPs to the two laptops, say 10.0.0.1 and 10.0.0.2. I have installed Asterisk 1.6.2.6 and

Hello again! I just got a SIP account and it seems - from a config on the net -, that I've configured it correctly. But I get no call to the outside. Registration was OK. I tried: channel originate sip/1/echo at iptel.org Application ... I see the channel active for a while, but no call gets established. In my config I have defined the section [iptel] for the outgoing call and I

Hello I have a weird behaviour with our local GSM (3G) provider -- several SIP clients crash on the android phone, when switching to 3G network, and in asterisks logs it looks like this - client registers on server successfull and then crashesh immediately. Here's suspicious part of asterisk log: [2011-08-22 19:38:12] ERROR[28605]: netsock2.c:263 ast_sockaddr_resolve:

Hello, I noticed a strange thing while testing my Asterisk-Kamailio Realtime setup. In an INVITE the From and To headers contain the same number when calling through a Realtime integration setup. This happens when the INVITE leaves Asterisk. Can you guys tell me what might be causing this? I have 660 at testers.com as a websocket client and 700 at testers.com (caller) using a Zoiper client (db

This is a small 12 line system, internal extensions 150 - 180. I didn't have a phone on 151. Here's the sip.conf stanza: ;;[151] ;;type=friend ;;context=longdistance ;;callerid="Conf Room" <151> ;;secret=0000 ;;host=dynamic ;;qualify=yes ;;dtmfmode=rfc2833 ;;allow=all ;;defaultuser=151 ;;nat=yes ;;canreinvite=no There's no DISA. And then somehow (how???) ip address

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Hello Have a setup of asterisk with realtime SIP devices. Trying to organise monitoring of my SIP devices. Once device registered, its state becomes NOT_INUSE (result of DEVICE_STATE(SIP/device) function). Simulating of device breakage - powerdown it. Waiting for a while (minute or two), retrieving DEVICE_STATE(SIP/device) again - no changes! Awaited UNAVAILABLE. doing from CLI: sip qualify peer

Hi; How I can make my configuration to allow the sip phones only from specific IP addresses range (for example from 192.168.10.1 - 192.168.10.50) to be allowed to connect for asterisk? In other words, in addition to be authenticated based on the username and password, it is required that the IP address of the Phone to be from this range. How? Regards Bilal

Hi The subject line says it all how do I enable this style of call. Pointers to the dns setup and asterisk setup would be great or even search words for google, as I am not sure how to search for this type of request. Alex -- There is no instance of a country having benefited from prolonged warfare -- Sun Tzu - The Art of War -------------- next part -------------- A

OK, I need a bit of help here. I'm configuring a new Asterisk 11 system and I accidentally let my firewall rules drop for a day or so. When I logged in today, I found messages like the ones below on my asterisk console. Obviously somebody was trying to take advantage of my carelessness. So can someone explain what would cause these types of messages to show up on my console? I understand

Hello! I have just upgraded to asterisk 1.8.2.1 and see some weird messages in log when client tries to register: [2011-01-19 00:52:47] WARNING[25624] chan_sip.c: Failed to parse contact info [2011-01-19 00:52:50] NOTICE[25624] chan_sip.c: Peer '0010101' is now UNREACHABLE! Last qualify: 105 [2011-01-19 00:53:03] VERBOSE[25624] chan_sip.c: -- Registered SIP '0010101' at

Hi, We have a Kamailio and Asterisk cluster, both machines being on a real 103.x IP address and also on a 172.x OpenVPN address. The problem is that when Kamailo receives a call from the VPN and forwards it to the Asterisk server on it's 103.x address, Asterisk never sees the call. If Kamailio receives a call from the VPN and forwards the call to the Asterisk server on it's 172.x

Hi all, I have *NOW beta 6 (asterisk 1.4.5) and I've configured it with a SIP trunk line. I can make outgoing calls, but I cannot receive any incoming calls. A port scan of my * server shows that port 5060 is closed. How do I open this port? In my users.conf, I have set [trunk_1] to hassip=yes and port=5060. Also, in the global SIP.conf file bindport=5060 bindaddr=0.0.0.0

Hello List, I am using Samba as PDC for some time now and I want do make the process of joining the domain somewhat more elegant ;) I use partimage to deploy images of my Windows XP-installation to the computers in my lab. In order to automate the process of joining these computers to the domain, I use some small perl-scripts. 1. After installing new software, etc. I have to create a new

When my SIP phones try to register with my asterisk box, this is what I get my log file: Mar 26 14:46:41 NOTICE[3896] chan_sip.c: Registration from '<sip:201@192.168.2.13>' failed for '192.168.3.2' - Not a local SIP domain In sip.conf I have this for my global settings: [general] context=from-sip ; Default context for incoming calls

Hello, all. We have successfully connected our new Asterisk 1.6.1.1 PBX to Vitelity's network and have been very happy with them thus far. However, we'd like to use domains in our sip.conf to facilitate routing in our multi-tenant environment. We also like to set allowexternaldomains=no for security. However, this breaks our inbound PSTN calling from Vitelity. Is it possible to use

Hi, Have just been testing asterisk 1.8.0, 1.8.0-rc5 and a trunk version from about half an hour ago. IAX Friends (Zoiper Softphones) don't stay registered for more than a few seconds they start out with status unknown and quickly become unreachable, I am using realtime with postgresql, with tables and configuration that have worked fine for IAX in 1.6 and a trunk release from a few months