similar to: Early codec selection / negotiation

hello list i need your help please regarding an issue with snom300 and aastra6731i using asterisk 11.13.0 asterisk snom 300 8.7.3.25 astra 6731i 2.6.0.2019 i have configured the trunks like below 100 in snom300 200 in snom300 300 in aastra6731i 400 in x-lite the calls between x-lite and aastra ====ok inbound and outbound the calls between x-lite and snom300====> ok inbound and

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm setting up an Asterisk system which is connected to an Alcatel 4400 PBX. On the * I permit g729 and gsm as codecs. If I try to transfer a call by hitting the # key, I get this messages and nothing happens on the phone: WARNING[30110]: codec_ilbc.c:175 ilbctolin_framein: Huh? An ilbc frame that isn't a multiple of 50 bytes long from

Hello all, I have installed the .deb packages of the Asterisk v1.8.3.3 from the upstream project on my Debian GNU/Linux Squeeze server and bought the Comodo's PossitiveSSL SSL certificate to be used for my SIP/TLS exercise. After setting up everything and trying to fix this problem, I am still getting a 401 Unauthorized SIP message. So as of this writing, I still cannot successfully REGISTER

You would need to give more information really. Your sip.conf file listing the entries for the phones especially which codecs are permitted. A copy of the 'asterisk -rvvv' console output when you make the call. On 27/03/15 17:05, Salaheddine Elharit wrote: > please no body has som with aastra can help me in this issue > > 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit >

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

Hi all, I face the subject strange behavior: calls arre dropped after 15 minutes on an asterisk 1.8.15.0. Only phones (SNOM300) connected to the Asterisk through OpenVPN seems to have the problem. From CDR, I see for 3 calls from this morning I'm aware of, that asterisk hangup after respectively 899s 894s 898s In logs I see WARNING[8213] chan_sip.c: Retransmission timeout reached on

Hi sorry for asking the same question again: here is my details: I've 50 exten in my sip and I'm using snom300 to my asterisk box this asterisk box is connected to another asterisk box using IAX trunk over 1MB full duplex line. I'm using g729 as the preffered codec. Can you please tell me how many calls can go at the same time without causing the any type of problem. thanks arun

please no body has som with aastra can help me in this issue 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit <salah.elharit200 at gmail.com>: > hello list > > i need your help please regarding an issue with snom300 and aastra6731i > using asterisk > > 11.13.0 asterisk > > snom 300 8.7.3.25 > > astra 6731i 2.6.0.2019 > > i have configured the trunks like

Hi list, We have a strange behavior: a customer Snom300 behind a public FW has contact like contact              : sip:user at x.y.39.147:2048;x-ast-orig-host=169.254.252.1:2048 The phone can place calls but not receive any. Also, qualify give unreachable which seems correct when looking the x-ast-orig-host IP. Problem is that the local IP of this phone is 192.168.1.75 Question: how

Hi, I've had a Snom 300 connected to my Asterisk box at home for 12 months or so now. Recently it lost all its settings and I had to reconfigure it via the built in website. For a few weeks it was fine. Couple of days ago it lost its settings again. I logged in to its web server and thought I would upgrade the firmware. It seems to be running an old version: Phone Type: snom300-SIP

Hello, I am trying to add a sip-trunk to my Asterisk 1.4.15/Elastix 0.9.2 server. The system is in production with local extensions, a zap trunk and a working sip trunk with sipgate.de. My asterisk server is behind a NAT/Firewall, anyhow it registers and works well with sipgate.de on incoming and outgoing calls. I aquired an account with a reseller net-voz.com: I did some testing with the

thank you for your response below the asterisk -vvvr Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [0176XXXXXX at from-internal:1] Macro("SIP/300-00000192", "user-callerid,LIMIT,EXTERNAL,") in new stack -- Executing [s at macro-user-callerid:1] Set("SIP/300-00000192", "TOUCH_MONITOR=1427481319.470") in new stack --

Hello, a person trying to call me by my phone number is getting the error 488 Not acceptable here. I googled that error, seems like this error is normally caused by a failed codec negotation, though I have no clue how I could have read this out of the logs. Anyway, my setup is as follows: Asterisk 1.8.13.0 - NAT - Sipgate SIP Provider The user calling me is also using Sipgate and is calling my

Hi All, I'm running trixbox 2.0. The problem: a remote extension behind a NAT, can call other extensions, can call any other party, can call voicemail, will ring when rung, but when answered there is nothing and the dialling party continues to hear the ring tone. I'm getting this error in the logs: "That's odd... Got a response on a call we dont know about" I see

Hi, I've configured my exten.conf for few exten. But I'm curious to know how long can be my exten like (exten => XXXXXXX.....). Is there any limit for this or not. B'coz I've noticed one strange problem. I'm usnig snom300 as my hard phone to make calls. when my exten length is 14 then calls goes immed. without any problem but when I change length from 14 to 15 call goes but

I am trying to implement a Centralized Call Waiting System. I have red some document about asterisk group features to manage group and category of a sip channel. I have done a lot of test about it but always it doesn't work correctly if I transfer the call. This is the macro code I use for inbound calls. [macro-test] ; ${ARG1} - technology something like SIP ; ${ARG2} - resource.

Hi, We face a strange behavior with Asterisk 1.8.15 and SIP defaultuser definition. in sip.conf [blabla0](natted-phone,ulaw-phone,callgroup1,snom-320) defaultuser=tel-221 mailbox=221 callerid="My CID" dtmfmode=auto ;defaultip=10.0.12.21 CLI sip show peer blabla0 Addr->IP : 10.0.12.21:2067 Defaddr->IP : (null) Prim.Transp. : UDP Allowed.Trsp : UDP

Hi list, How do I make Asterisk 13 (using PJSIP channel) to handle PUBLISH sent from the phones? The trace looks like: ## PHONE -> ASTERISK ## PUBLISH sip:1001 at example.com SIP/2.0 Via: SIP/2.0/UDP 172.31.19.250:2048;branch=z9hG4bK-w2orn21sre9u;rport From: "1001" <sip:1001 at example.com>;tag=98slbhbn16 To: "1001" <sip:1001 at example.com> Call-ID:

Is there a way for voice media clients (like SIP phones and POTS/PSTN phones) that connect their call legs to Asterisk to negotiate a common codec that they both use at their end, so Asterisk doesn't have to transcode? Asterisk would know which codecs each client can use, and which each prefers, then find the one they each have in common so the fewest legs need Asterisk to transcode to their

Hi all, I have deleted and reinstalled samba 3.4.0 and then I got a failure at starting samba .I guess that was because of lacking of smb.conf ( I have deleted it manually and it didn't install it back) And I have decided to install samba4 which gave me also the same failure so I have again installed samba 3.4.0 and I found out an smb.conf file from