similar to: Intermitent voice issues

Hi all, This issue is giving me a lot of grief with my customers. I have 5 asterisk servers running in production, each one with almost 70 simultaneous calls at peak hour. Most of my customers complain that their calls drop after 20 seconds or so. After running through my cdr's, I see that the number of 20 second calls is MUCH larger than any other number. (see below) billsec count(*) 1 924

I'm trying to get my asterisk server to reinvite. I have two asterisk servers with public IP's. My users (behind NAT) register on one server (I'll call it server 1), and for some calls they are transfered over to the other server (server 2), because that server has the E1's. I want server 1 to be in the signaling path for billing reasons, but handling the media stream is killing

Much to my surprise I tried to debug an AGI script today with "agi debug" on the Asterisk CLI and it did not work. Plus, I could find no reference on lie of it being removed. Is there another name for that command? I scanned the CLI help but found nothing similar. Both my 1.6 boxes do not have the command but my 1.4 box does. Thanks! Alex

I have asterisk 1.0.2 and a Sipura SPA-2000 (firmware 2.0.6(c) ). Today it started to log "registration failed" at intermitent periods. It registers fine, after a few minutes it can no longer register, then after a few minutes it registers fine again. I am wondering if there is a known issue with either asterisk or that sipura firmware. Victor Perez

Some of the computers in our network keep having trouble connecting to samba I was able to restore the connectivity by placing the computer and IP address in the host file. Immediately after that the client was able to connect. It is my understanding that when Samba is using WINS if the WINS server fails to respond within a certain length of time then these are the types of errors I will get. Is

Hello : One Win95 client, connected over a SLIP connection to an SCO Openserver 5.0 has been working fine until System Administrator has updated OS Version to Unixware 7.1.0. On this server (Unixware 7.1.0) , I've installed Samba 2.0.2 to access all Win9x shares. All shares on the LAN (connected via TP 10Mb cards) work fine, but when I print any job to Win95 client connected via SLIP

Hi, I''ve been looking at Ruby on Rails for an in-house project where I work. After I got everything setup correctly (apache, fcgi, mysql, etc) I''ve started to run into "lost connection to mysql" errors. I googled to try and find a solution, but most of the problems people seem to be having are constant and simple to fix. I haven''t found anyone talking

Hi all, I have 2 Linux machines running winbind attached to a Windows 2003 server in AD mode to resolve users and groups via nss (nscd is disabled for passwd and group info). In an intermittent way winbind stops resolving group names, for instance the 'id' command returns just the GID and no name for the primary user group and executables trying to resolve members of groups cannot

I am currently suffering various SIP attacks. I am using the following extension to record the caller's IP address: exten => h,n,set(CDR(srcip)=${CHANNEL(recvip)}) However, in recent attacks, this IP address is not correct, and I believe that they are spoofing it. I am using asterisk 1.6.2.15. Does the CHANNEL(recvip) variable record IP show in the SIP header instead of the real, UDP

I have an issue where at odd times, maybe after 3 days, maybe after a week, people suddenly cant do domain logons. Unfortunately the machine is 50km away so i'm sure theres more details I can glean once I can interogate the users a bit more. Things I have noticed: Anyone currently logged in can still work fine. A restart of samba fixes the issue (till it hapens next). ps ax shows smbd and

Hi all, I am having a curious problem. I use two cdr backends, csv and MySQL. These are my settings: Call Detail Record (CDR) settings ---------------------------------- Logging: Enabled Mode: Batch Log unanswered calls: Yes * Batch Mode Settings ------------------- Safe shutdown: Enabled Threading model:

I have a computer I am using to host a virtual machine. Centos 6, for both, 64 bit. The host machine's network connection seems fine. No problems. Trying to access the virtual machine is usually fine. but then, poof, ssh, http, ftp, all lose connection for about a minute. Then they come back up. I looked in all the logs on both machines, could find nothing, but not sure where to look. My

Hello We are using SLAMD (Distributed Load Generation Engine, www.slamd.com) to benchmark our dovecot server (ldap auth). We are simulating 2.000 simultaneous logins and 20% of them fail. We saw the following errors in the log: Apr 12 09:40:07 buzon dovecot: auth: Error: ldap(correo,192.168.4.153): Request queue is full (oldest added 1 secs ago) Apr 12 09:40:07 buzon dovecot: auth: Error:

Hi all, I've been trying to add a custom mysql field to my CDR's, but I must be doing something wrong. I am using asterisk 1.4 and asterisk 1.6, in extensions.conf I add: exten => h,1,Set(CDR(q931)=${HANGUPCAUSE}) This extension is executed, I can see it in the asterisk console. I have added a new column in my MySQL database called q931. However, the new field does not show up in

Hello everybody. I have a provider that has 3 asterisk boxes which I must balance my calls against. At the moment, I route different destinations to different boxes but this causes lots of problems. Without resorting to OpenSER or other proxies (as my provider also uses IAX), is there a way I can load balance outgoing channels in Asterisk? For example an IAX peer like: [iax_provider] type=peer

I purchased a Grandstream 4 FXS Gateway and my *XXXX extensions are not working. I disable the special features and changed the DIAL to {X*#+} but not luck. I can dial any other number, receive calls and so on. This is the only thing that seems to be an issue. Has anybody found a way around this problem. Reference: GXW-400x IP Analog Gateway Series Documentation:

I''m pretty new to javascript, and scriptaculous, but I know what I want to do. I want to make it so that when a person clicks a link, the previous content of the div fades out, and the new content fades in. This is what I''ve got for my function: <script type="text/javascript"> //<![CDATA[ function loadmerch(im) { new

hi, i''ve just started using script.aculo.us visual effects, lots of fun. i was wondering what the best and most efficient way would be of achieving something along the lines of fade anything technique (FAT, http://www.axentric.com/aside/fat/) whereby an element''s background fades away from one color to the element''s native background-color. (for example, you get

Well, I seem to have developed a strange issue with the GPL PV drivers in Windows. I''m running Xen 3.2 on SLES 10 SP2 and running some Windows XP HVM domUs. Most (12-15) of my Windows machines work just fine. Two of them, though, have started exhibiting a strange behavior with intermittent network connectivity. Basically, the network starts up and connects initially. After some

Hey guys, I''m new here and just checked out Prototype with Script.aculo.us and have to say it''s a great experience once you get the concept. However, I''m not very experienced with JS so I''m a bit stuck on something I think is quite easy to solve: What already works: A searchfield is observed by a DelayedObserver, a list of contacts is updated vie Ajax updater.