similar to: T1 PRI shows yellow/red alarm

Hi there, I've got two Asterisk hosted PBX servers with Digium TE210P cards attached by a E1 cable to Port 1 on each. On startup, both cards flash red, alternating between ports 1 and 2. When server #1 loads the Zaptel module and drivers, Port 1 status LED goes green. When server #2 loads the same module and drivers, Port 1 status LED goes completely blank. Unloading the wct2xxp

Hi, I'm trying to get a TE212 working on a Dell PowerEdge 1850 running Debian etch using the latest release of libpri (1.4.0), zaptel (1.4.2.1) and asterisk (1.4.4). The initilization of the Octasic echo canceller seems to fail when the wct4xxp module is loaded. [...] VPM450: echo cancellation for 64 channels Failed to open chip, code 00103017! VPM450: Failed to initialize [...] By looking

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

hi i'm trying to configure a TE205P on asterisk@home i've edited /etc/sysconfig/zaptel adding this line: MODULES="$MODULES wct2xxp" now, when the system is loading, i can see that the wct2xxp module is loaded correctly but if i try the command: /usr/local/sbin/genzaptelconf i get: STOPPING ASTERISK STOPPING FOP SERVER Generating '/etc/zaptel.conf' Generating

Hello, I am installing a TE210P card, but i can't find the wct2xxp module, can somebody help me to configure my card? Thanks Manuel -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060119/1e3af3fb/attachment.htm

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

Hello, What's wrong ? make install ..... options torisa base=0xd0000 alias char-major-196 torisa alias wcfxs wctdm alias wct2xxp wct4xxp if [ -d /etc/modutils ]; then \ /sbin/update-modules ; \ fi depmod: *** Unresolved symbols in /lib/modules/2.4.27-2-386/misc/wctdm24xxp.o depmod: *** Unresolved symbols in /lib/modules/2.4.27-2-386/misc/zaptel.o depmod: *** Unresolved symbols in

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

Before I reinvent the wheel, is anyone implementing any monitoring of PRI (or T1) Red or Yellow alarms? I would like to get notified ASAP if this occurs. Or possibly automate the fix since "service zaptel reload" seems to fix my random issue. I was thinking of using tail of the full log file, but my concern is that if there is too much traffic, I will miss the alarm, or if there is

Hello Approximately every 15 minutes I'm getting the following error (on all channels): [Apr 7 01:34:27] WARNING[6530]: chan_zap.c:6628 handle_init_event: Detected alarm on channel 31: Yellow Alarm [Apr 7 01:34:27] WARNING[6529]: chan_zap.c:2388 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel anyway! [Apr 7 01:34:27] == Primary D-Channel on span 1 up

i get this message with a red signal on TE110P card: ***************** TE110P: span configured for... Calling startuo (flug is 4099) wcte1xxp: Setting yellow alarm ***************** what does mean ? thank you :)

Dear list I am facing strange issue. i have 16 PRI setup. out of 16 there are 2 cables which are giving me yellow alarm in if they are in card number 1 and works fine if i put in card2 what could be the error is it card faulty?? -- Akib Sayyed Matrix-Shell akibsayyed at gmail.com akibsayyed at matrixshell.com Mob:- +91-966-514-2243 -------------- next part -------------- An HTML attachment

Hello everyone. I have server with 2E1 PCI card, asterisk 1.4.35, dahdi 2.4.0, libpri 1.4.12-beta2. One PRI trunk looks to PSTN and take a clocksource from telco. Another trunk looks to PBX with DECT system. Some outgoing calls from asterisk to PSTN drops. The last message that exists before hanging up process is: DEBUG[28467] channel.c: Got a FRAME_CONTROL (8) frame on channel DAHDI/... This

Hi, Ok, I put the new TE410 into our system last night - This is the second TE410P card. There is also TDM400P in Slot 5 with IRQ 9 which is shared with aic7xxx (SCSI) According to "cat /proc/interrupts", the new card is in the second slot using IRQ 11 (the first card is in slot 1 on IRQ 10 - but always has been). With only the original card install, there has been no issues with

Folks, I really hope you can help me here - I'm beginning to tear my hair out! About 10 days ago my company moved to a new office. As a result of this, we've plugged our PBX box, which has happily been running for the last three years, into our new E1 line. Since then, I've been seeing intermittent yellow alarms. Obviously, since this was working fine in the old office, the thing to

How would you categorize a Yellow Alarm sensed by the Asterisk side in a Legacy PBX integration? We have a Mitel SX200 connected to an Asterisk(1.2.4) with a TE110P. Twice today (first time in over a month) we received a Yellow Alarm on the TE110P. I have been able to clear it easily by restarting zaptel. Thanks in advance! -------------- next part -------------- An HTML attachment was

I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS). These connect to a Digium TE210P card. I'm running kernel 2.6.10 and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today. The results are the same for all versions: Right after I reboot, and modprobe wct4xxp, my analog phone connected to port 13 of the first channel bank (first FXS port) gets a dial

Hi, On a Asterisk 1.8.12 system working OK for months (>100k calls proceed), users are complaining for bad audio. My setup is: PSTN <--E1/PRI ---> Asterisk <--- E1/PRI---> Siemens HiPath <---E1/PRI ---> PSTN asterisk -rx "dahdi show version" DAHDI Version: SVN-trunk-r10414 Echo Canceller: HWEC asterisk -rx "pri show version" libpri version: 1.4.12 A

I've seen this consistently on three systems, with three different cards, and multiple versions of DAHDI. At first I thought the issue only occurred on newer, Nehalem-based, systems, but I reproduced it on a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the

Hello list, For a customer I need to detect blue alarms on his T1 trunks. His server is in running asterisk and zaptel 1.4. I have a tool to generate all sorts of alarms, but on generating blue alarm, zaptel recognizes them as red alarms. This is not good for us as we need to get blue alarm as blue alarm. I checked using: cat /proc/zaptel/* zttool Are these versions of asterisk and zaptel