similar to: Question about EuroBRI final 2 digits

Deutsche ?bersetzung folgt / German version following ===================================================== Hello, i have Asterisk running with 2 ISDN-Cards. One AVM Fritz for connection to german ISDN and one HFC-compatible-Card (NT mode) for connection to ISDN-Phone (later: ISDN-PBX). Here is my actual installation: ISDN -> Fritz - ASTERISK ? HFC-NT <- ISDN-Telephone If i pick up my

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Hi There, I have an asterisk an a Digium 4 Port E1 Card On E1 Port No. 1 I have the Telekom PRI On E1 Port No. 2 I have an Alcatel PBX that cannot be changed So I have setup my asterisk between Alcatel and Telekom In extension.conf i configured: [telekom] exten => _9149.,1,Dial,ZAP/g2/${EXTEN}; exten => _9149.,2,Hangup This works great, all incoming calls are directly routed to alcatel

We recently had our PRI installed, we currently have 100 toll-free's pointing to it. I have almost everything working great but.. I have setup the first few numbers we want to use coming in from the PRI and they work great, but.. What I want to do is setup an extension with pattern matching to answer for any numbers called that are pointed to our system and PRI but not yet in

Hi all, I have had (what I consider) an odd request. The installation I'm working on now is an office on a multi-floor building. They 're looking for some kind of solution with the phone system to provide door control. We are a non-profit so of course I'm looking for something VERY inexpensive. I'm sure /someone/ has done something like this. I'd appreciate any ideas. Cassius

Hi, ? The current SCCP image on the 7942 phone is :SCCP42.9-0-2SR1S. We are trying to convert/upgrade the phone to SIP version of the firmware i.e : cmterm-7942_7962-sip.9-0-3 (Firmware is downloaded from the cisco support site). We have unzipped and placed all the files in the /tftp (root directory) of tftp server. Following files are also placed in the tftp directory. ? The Upgradation /

Hi list, I'm having a problem with CallerID names not showing up when calls come in. I have dialplan code to store the callerid(name) away and it is blank (null). However, the voicemail variable ${VM_CALLERID} has the name field populated. For example, here is some of the dialplan code: 2. Set(CALLER_ID_INFO_ALL=${CALLERID(all)}) 3. Set(CALLER_ID_INFO_NAME=${CALLERID(name)}) 4.

Hello all, I am using Linksys SPA942 in my current installation activity. I see a peculiar behavior: A call is made and the SPA942 uses its speaker. When the far end of a call hangs up , the SPA942 stays off hook, and after a time plays a fast busy. The user then has to press the line presence button to hang up the phone. I think I must be missing some sip.conf parameter. My sip.conf is pretty

Hi ALL, still having trouble getting Ast 12 to run. I got it compiled and built but now when I try to run, I'm getting a missing library error that seems to be in error (see below). The .so file DOES exist with correct permissions. [root at Asterisk12 ~]# asterisk -rvvv asterisk: error while loading shared libraries: libasteriskssl.so.1: cannot open shared object file: No such file or

Hello, I'm a graduate student. We are setting up an IVR system for research purpose on a BRI channel. (We can't afford PRI line as its cost is about 10x of the BRI). The line will be connected to the CTI card. Using asterisk server we will be recording the calls. I'm confused about whether we should apply for point-to-point connectivity or point-to-multipoint. P2P costs more than

Is there a recommended way to find out the cause of DIALSTATUS = CONGESTION for PRI/BRI channels? Currently I am evaluating the DIALSTATUS variable and I also count the active ISDN channels for the ISDN trunk in question. Counting the active ISDN channels seems somewhat clumsy as the mapping to a specific trunk must be done by hand (or write even more code). I have a setup where outgoing calls

Hi, I've been learning asterisk for a couple of weeks now - and it worked for me as faar as standard configurations where concerned (sip/iax outbound/isdn4linux & capi with AVM Fritz!, Digium X100P FXO). Now I recently I'evaluating to use asterisk as a replacemnt for our companies (15 employees) legacy pbx system and I'm experiencing multiple problems with the hfc isdn cards:

Hello, I'm trying to build Asterisk12 on a Centos 6.4 VM. The configure script is erring out with: ? checking for uuid_generate_random in -luuid... no checking for uuid_generate_random in -le2fs-uuid... no checking for uuid_generate_random... no configure: error: *** uuid support not found (this typically means the uuid development package is missing) I have installed (using yum) uuid, uuidd

Hello all, I'm having a problem with my intercom function that I use for under-chin paging. I'm running 1.6.2.13 on this server, and we use Linksys SPA-942's for our general phones. I have a global defined which has all the SIP channels concatenated together - this is ${ALL-PAGE-EXTS}. The problem comes when a user is on the line, and someone else uses the intercom function to page

I am integrating a new server (Asterisk 1.8.2.3, DAHDI 2.4.0) with VOIP only trunks, and this server only has soft phones. When I dial an extension and the phone is not registered, I don't get any ring or progress indications, and eventually the Dial() times out and drops into voicemail (as expected). CLI output: -- Executing [s at macro-StdExten:6] Dial("IAX2/barneveld-2036",

Hello List, is someone operating a DID /P2P / Anlagenanschluss with more than one HFC-Based ISDN-Card ??? I have now 12 hours of setup-troubles behind me with Colt-Telekom, where we did not get it working with two HFC-based cards. Here the setup: - 2 HFC-ISDN-Cards (the one from Conrad-Electronic) - bri-stuff.0.0.2 (with the asterisk-sources from the download.sh-skript) - two NTBAs from

Hi Achim, thank you for your effort! I did a couple of tests, from W8.1 with x64 driver which where rather old and therefore disignated for W7x64. But this went stale as well. Therefore I'll give it a try by using a W7-WS for uploading the drivers. Franz >>> Achim Gottinger <achim at ag-web.biz> 06.06.2017 15:27 >>> Hmm after another try an windows 7 client 32 and

>>> Rowland Penny <rpenny at samba.org> 23.05.2017 12:39 >>> On Tue, 23 May 2017 12:08:59 +0200 Franz Gansberger via samba <samba at lists.samba.org> wrote: > > > Why ? profiles is a windows thing and NFS isn't > >> The Samba-AD is virtualized, therefore the storage is an a different >> machine. >Allow me to introduce you to the

hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another