similar to: Ongoing problem with 1.8

Hi, How would I go about troubleshooting this: [Dec 24 07:15:11] WARNING[5228]: chan_sip.c:3397 retrans_pkt: Maximum retries exceeded on transmission a50346a4-bfdc32ed at 192.168.1.95 for seqno 101 (Critical Response) -- See doc/sip-retransmit.txt. [Dec 24 07:15:12] WARNING[5228]: chan_sip.c:3397 retrans_pkt: Maximum retries exceeded on transmission 90bd2c4d-aaaec88 at 192.168.1.95 for seqno 101

Has anyone on this list succesfully managed to get two (or more) TDM04 (with four FXO each) working on a Dell PowerEdge server? If so, which model? Was it a hassle? I'm doing a seven-line installation and a callbank seems like overkill, I just don't want to get suck with a PowerEdge that gets into an IRQ mess. Thanks in Advance, Tom Hayden

I'm trying to debug a NAT issue and I can't make up my mind if the problem is with my Vigor 2800 or Asterisk 1.6.2. I know the Draytek is alleged to suffer from nat 'issues' but I did not have the issue with 1.6.1 - so I'm wondering if something has changed? The Draytek offers 'NAT & Routed' on a single device - so my Asterisk sits on a Public IP, and I have a

when I make a call to the pstn it shows me this error: aximum retries exceeded on transmission 9d4a24f8-b673756b at 192.168.10.19 for seqno 102 (Critical Response) -- See doc/sip-retransmit.txt. [Apr 11 20:35:34] WARNING[3169]: chan_sip.c:1998 retrans_pkt: Hanging up call 9d4a24f8-b673756b at 192.168.10.19 - no reply to our critical packet (see doc/sip-retransmit.txt). bug? voicemail same

Hello folks, since I started with asterisk 1.8.2 I got this messages in my console when finish a call. -- Executing [1610 at from-e1:1] Dial("SIP/xxx-00000027", "SIP/1610,60") in new stack == Using SIP RTP CoS mark 5 -- Called 1610 -- SIP/1610-00000028 is ringing -- SIP/1610-00000028 answered SIP/xxx-00000027 -- Locally bridging SIP/xxx-00000027 and

se?ores alguien le ha presentado este problema al acceder al voicemail o al hacer una llamada a la pstn 1940> Playing 'vm-received' (language 'es') -- <SIP/111-08d91940> Playing 'digits/yesterday' (language 'es') -- <SIP/111-08d91940> Playing 'digits/at' (language 'es') -- <SIP/111-08d91940> Playing

Hello list, I am confronted with the following problem : making a call only leasts for about 30 seconds, then the call is ended. The CLI shows : [May 21 14:31:50] WARNING[25345]: chan_sip.c:1980 retrans_pkt: Maximum retries exceeded on transmission 954539948-5060-2 at 192.168.1.100 for seqno 11 (Critical Response) -- See doc/sip-retransmit.txt. [May 21 14:31:50] WARNING[25345]:

Hi All, I'm currently having trouble with dropped phone calls. The following error message is always in the log. This is a Grandstream GXP-2000 Firmware 1.1.6.16 . The Asterisk box is currently 1.4.22-rc5. The problem has been occurring on other versions also. [Sep 19 15:48:02] WARNING[13657]: chan_sip.c:1958 retrans_pkt: Maximum retries exceeded on transmission 8acaea6dc4c6e9b5 at

hi i got TOS and retranssmission error on receiving SIP call chan_sip.c:2794 retrans_pkt: Maximum retries exceeded on transmission 10CAED68-0F1D-DF82-DA1E-A76C1CB3D8A3 at 172.18.100.72 for seqno 43156 (Critical Response) -- See doc/sip-retransmit.txt. [May 22 13:42:44] WARNING[18021]: chan_sip.c:2821 retrans_pkt: Hanging up call 10CAED68-0F1D-DF82-DA1E-A76C1CB3D8A3 at 172.18.100.72 - no reply to

Hello everybody. I have a problem with an integration between an Asterisk (1.4.24.1) on FreeBSD 7.0 and a Shoretel 7.5 server. To make a very long story short, when someone behind asterisk call an extension behing shoretel everything work as expected. When someone behing the shoretel server call someone behind asterisk the first 10 seconds of the call seems ok but then the line is dropped

Hi, im trying to build a UAC and I'm coming up with some trouble whenever I receive a SIP 491 Request Pending Response. This happens because I try to place a call on hold using an Invite request rigth before Asterisk sends me a Re-Invite for the same call. I respond to the 491 response with an ACK however for some strange reason Asterisk doesn't accept the ACK and insists on retransmitting

I have asterisk 1.6.2.11 talking to a cisco 1760 running ipvoicek9-mz.124-25b. whenever a call goes through the 1760's FXO or FXS (in or out) there is a 915 second maximum call time due to asterisk hanging up the call because of a "critical packet" being missed. I read doc/sip-retransmit.txt and I don't see anything there that is helpful to my situation - the asterisk box is

I have a DID from IPKall.com which is forwarded to my asterisk box. Then this extension should call my ip phone using Dial application. Everything works fine, except when I pickup the phone, I can talk, the other party can hear me, but I cannot hear anything the person says on the ip phone. Then after a couple of seconds, the call hangs up. I don't know why. Here is the message I get:

What is the problem with SIP retransmits? ----------------------------------------- Sometimes you get messages in the console like these: - "retrans_pkt: Hanging up call XX77yy - no reply to our critical packet." - "retrans_pkt: Cancelling retransmit of OPTIONs" The SIP protocol is based on requests and replies. Both sides send requests and wait for replies.

Hi All, I've looked through the archives and tried several variations in Google, and I haven't found anything on-point... So I'm hoping someone here may be able to help this relative Asterisk neophyte shed some light on an issue: I have a box running Asterisk 1.4.22 in our lab with several Cisco 7961G phones and an AEX804E card (4 FXO, hardware echo cancellation). The server and all

Sorry everyone, I know this has been hashed over a bunch of times but I can't find anything that pertains to specific cracking and popping on the FXO modules of a TDM04. This happens on inbound or outbound calls. This is the first install I have done with a TDM card for FXO modules so please, be kind if I am missing something really simple. Damn I wish everyone wanted t-1's or

I am getting the following warnings on the CLI when loading Asterisk 1.6.1-rc1: [Feb 12 12:32:34] NOTICE[22261]: timing.c:59 ast_install_timing_functions: Multiple timing modules are loaded. You should only load one. [Feb 12 12:32:34] ERROR[22261]: codec_dahdi.c:398 find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory [Feb 12 12:32:33] WARNING[22261]:

? HI ? I have asterisk 1.6.13 running. My ATA are connected via vpn (openvpn) ? Out going calls from asterisk to the ata works fine Incoming calls from the ata to asterisk cuts off with the error msg ? Maximum retries exceeded on transmission 70854efe-4157e3a8 at 10.168.7.103 for seqno 102 (Critical Response) -- See doc/sip-retransmit.txt. [Dec? 6 13:52:43] WARNING[3921]: chan_sip.c:3858

Hi all, After running for months without issue I've got a situation where incoming SIP calls to my asterisk server are failing while outbound calls appear to be working as expected. The server is a gateway between my home LAN and a broadband cable connection with a dynamic IP. The gateway runs FreeBSD 7.1 and Asterisk 1.6.0.15 (built from ports) and registers to my ISTP no problem. Outgoing

Thank you for the reply. On 8 Dec 2010 at 13:38, Danny (Danny Nicholas <danny at debsinc.com>) commented about RE: [asterisk-users] Configuring Softphone: > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gary Kuznitz > Sent: Wednesday, December 08, 2010 1:27 PM > To: Asterisk