similar to: Polycom Blf / Directed Pickup

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Greetings list, We recently installed some Linksys SPA962 + SPA932 sidecars into a client's offices. The BLF functionality works fine, but call pickup using the BLF is something of an issue. Following the advice on voip-info.org, I configured part of their dialplan as follows: exten => _**2XX,1,Pickup(SIP/${EXTEN:2}) exten => _**2XX,n,Dial(SIP/${EXTEN:2},15,tw) exten =>

I'm looking for some ideas of people who have setup a sidecar (eg: Aastra 560M). Obviously it's handy for BLF (to see who's on a call)...but what else? Anyone want to share interesting things they've done with a sidecar? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Hello all Sorry for the repost, but I believe this is essential for Aastra phones to use directed pickup with BLF in 1.2 (and it's still experimental in 1.4 I think). pickup-mgernoth-2006-07-28.patch.txt If anyone knows otherwise than that this is still required in latest 1.2 or 1.4 please reply with success/failure stories. Any info would be appreciated. We can get directed BLF pickup

Hi, Latest SIP firmware for Polycom 601 is 3.1.6. With this, is Directed Pickup supported ? At the moment, when an extension is ringing, I can see BLF turning to solid Red but I can't see it turning to Blinking Red. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

We are having an issue with the SPA962/932 combo where the phone and the sidecar will reboot unexpectedly ? could be onhook, could be on a call, doesn?t seem to matter. I read that certain early firmware revisions could cause this so I?m running what was a week ago the newest available (5.1.18). A call to Linksys support suggested that I ensure that the phones are using a recent firmware version

Hi, I'm banging my head over this. Usually, I'm using a SIP hardphone feature called "Call Pickup Starcode" to enhance BLF with Directed Call Pickup : basically, SIP hardphone (here a Thomson ST2030S) is configured to send an INVITE message whenever a BLF is pressed while blinking. The INVITE is build with the extension number (attached to the BLF that was blinking and pressed)

Hello, On a Asterisk 11.12.0, I'm studying BLF behaviour with Yealink phones. My ultimate goal is to present Operator the name and number of every incoming call so that he/she can if it's worth to pickup a ringing incoming call. I've discovered notifycid option in sip.conf. When a call comes in, I can see that Asterisk is sending two successive NOTIFY messages while the target is

Hello, If the phone of my colleague rings, I can see this with BLF-lamps on my Snom IP-phone. I would also like to see *_who_* is calling. I would like to see the external number on my screen so I can choose whether to pickup the call with BLF. Therefore I have in sip.conf : notifycid = yes With this setting on, I see on my screen : 10 --> 10 10 is the internal extension of my colleague.

Hi, Is anyone aware of a SIP hardphone with Busy Lamp Fields supporting 2 colors (or more) ? This could be very useful to support extended presence, for instance. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090519/0b8f1b62/attachment.htm

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

has anyone done it? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080528/ff622d28/attachment-0001.htm

I'm trying to get the BLF to work correctly on my Polycom phones. I have the buddy watch working correctly, but can't get the BLF to change based on the state... Example: When an extension is ringing, I get the same 'red light' that I get when the extension is actually in use... I was wondering if anyone had any experience with getting the Polycom phone to

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

I have servers setup in versions 11 and 13. Between two 11 servers, I had no issues sharing BLF, and assigning the hints on my Cisco 525G2 phones. I've upgraded to 13 on one of these servers, and now can't share BLF. I get something like... [2017-07-15 22:35:49] NOTICE[3483]: res_pjsip/pjsip_distributor.c:347 log_unidentified_request: Request from '"Travis Ryan" <sip:612

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Hi The blf-crypt password schema mentioned in the docs could be a solution to my auth problem. However, the docs state that actual support depends on the glibc. Mine apparently doesn't. Does support depend on the glibc's version (mine is 2.15-r2)? Maybe someone with access to a box with a good enough glibc could do the following and post the hash for the plain password "test"?

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the