similar to: Problems with ZAP Channels

Good afternoon, I'm trying to write a simple callback context, but i need to hangup an incoming call and then call the origin number back, the problem is that asterisk stops processing the call after Hangup() application then it is not able to dial the origin number back. Sorry for the grammatical erros. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Good Morning, I'm thinking about buying the asterisk six-months online course, Have somebody here that bought that course? What is your opinion? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110606/3008703d/attachment.htm>

Good morning, I have a digium wctdm24xxp in my asterisk box, i am not able to see the callerid when the call is incoming from the fxo line, i live in Brazil, how can i change the signaling from fsk to dtmf? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list First of all could you please explain loop-start and ground-start for me? What are they used for? Next, I have the following configurations: dahdi-channels.conf : context=pstn-channels signalling=fxs_ks channel=>130 context=phone-channels signalling=fxo_ks channel=>127 chan_dahdi.conf : [channels] cidsignalling=dtmf cidstart=dtmf signalling=fxo_ls pulsedial=no

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Folks, I've got one of those GPO 1950's rotary dial phones that I'm trying to get working in the UK. I've got pretty much everything working with my TDM400, the phone rings and I can receive calls but I cannot dial with the rotary dialer. I have set pulsedial=true or whatever the exact setting is and I can dial from the phone by lifting the receiver and tapping out the number on

hi, i have problem with pass-through faxing with this scenario hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.2.X(xen virtual) - linksys ATA i can fax to fax2mail on hylafax but after upgrade asterisk2 to 1.4 faxing is not working hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.4.X(xen virtual) - linksys ATA configuration is same do you hava any idea what is

Hello All I'm using asterisk 1.1.X and MFCR2 lib version 0.03pre2. when i call to E1 (connected with asterisk), chan_unicall don't detected event incoming call and show error. error messages: *CLI> Warning, flexibel rate not heavily tested! Rx CAS bits 0x9 [ 10000/ 0/ 0] Line unblocked -- R2 Channel 4 unblocked Rx CAS bits 0x9 [ 10000/ 0/ 0] Line unblocked -- R2

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Hi All i'm using sangoma card. connected to E1, my wanpipe file as #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Fri May 27 00:25:04 GMT+7 2005 # # Note: This file was generated automatically # by /usr/sbin/wancfg program. # # If you want to edit this file, it is # recommended

Hi, I'm having a problem calling international numbers with debian's Asterisk 1.0.7 w/ zaptel 1.0.9 in Moscow. Russia doesn't seem to have touchtone dialing, so pulsedial is enabled on my TDM400P interface. Local numbers work fine, but when it comes to long distance or international, I'm lost. The prefix for these should be 8 (wait for dialtone) 10 (country code) (city code)

Is anyone having/had a problem with a TDM400P card hanging up on STD outbound calls as soon as the called party answers. I'm guessing that * is responding to the STD pips in some way. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you

Hi, I'm currently running asterisk 1.0.9-r1 and zaptel 1.0.9_p1-r1 (the current gentoo ~x86 versions), with the UK CallerID patches from http://www.lusyn.com/asterisk/patches.html applied. The Zap interface itself seems to work fairly well - although it's a little quiet, there is no echo. Unfortunately, there's also no CallerID. My zapata.conf is as follows: [channels]

Hi all... I have a problem with caller id on my asterisk server. here is my configuration : centos-5, asterisk 1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2 ibm X-3200 series, xorcom astribank (16fxo, 8fxs), 16 line telco (hunting) everything fine until I try to feed my app with caller id. My extensions.conf : [incoming1] exten =>

My outgoing FXO calls are answered but have no audio in either direction if I have callprogress=no in chan_dahdi.conf. If I change to callprogress=yes then the audio returns. My chan_dahdi.conf file is listed below. Can anyone point-out why callprogress=no isn't working? #cat /tmp/a [trunkgroups] [channels] language=en context=incoming toneduration=40 ;usedistinctiveringdetection=yes

(Sorry of this appears in the list twice, but I wasn't sure if it was blocked or not) Hi there, I'm having a problem with my TDM-400P which has been working like a charm up until very recently. It started to fail last week, and so I was hoping someone could illuminate me with some information as to why. Its configuration is as follows: ------------ FXS (green) module is in position 1,