similar to: TE420 issue: card 0 span N: isr2=XX isr3=Y

Hello! Just got new server with TE420. Not all four spans will be used immediately, but spans not configured or not connected blink red light. Is it possible to turn span off, so my colleagues will not eventally tell me that something is wrong with asterisk? :-) Thank you!

Hi! I get high cpu usage on my laptop (yes im running Centos on my laptop) after my last update. At the beginning i though it was libvrtd but after stopping it gnome monitor keep showing high cpu usage although i couldnt find the app that was responsible for it with the top command. I searched my log files and I saw alot of iwlwifi message. I had to turn off wifi in order to stop high cpu

Hello, I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to providers Cisco 2800 with VWIC-1MFT-E1 card. the same card runs fine with another E1 provider. TE420 led's lite green. Message type: RELEASE COMPLETE (90) < [08 02 80 ac] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause:

<rant level="mild"> I tried emailing support and got a rejection notice saying to go via the website, which then wants registered product details before it will let me enter a support request. Unfortunately, the card was bought by my customer, not by me :-( So I'll just have to ask here... </rant> I am currently trying to replicate an existing system build using new

Hi All I am getting a strange prblem while installing TE420 on a Dell Poweredge T100 machine. I get a "TE4XXX: version Synchronisation error " nad the machine hangs which needs a hard reboot . Its a new machine and if i install TE410P then installation is successful. Strangely enough i have a working TE420F on another Dell POweredge T100 machine at a different locaiton ... The DELL tech

I have the following software installed in a Centos Box with a TE420 (5th Gen) card. . Centos 6.5 64-bit . Asterisk 1.4.22 . dahdi-linux-complete-2.9.1.1+2.9.1 . libpri-1.4.14. Even without plugging in the ISDN into span 1, all 4 spans are flashing red. Plugging an E1 into span 1 makes no difference. My system.conf is just simply: loadzone=au defaultzone=au span=1,1,0,ccs,hdb3,crc4 bchan=1-15

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

Hi, Does anybody have any feedback on this new card from Digium? It was announced a couple of weeks ago but now Digium said they ran out and is no longer available for purchase via their web site. I find this kind off odd. If they are out why don't they just says its on backorder or something, rather than pulling it off completely from the store. I am kind of hesistant at this point

Dear members of the list, I have difficulties to obtain sync with a Digium TE420 PCI Express For four entries E1, In my case I am with only 3 E1s available to configure. The telephony operator is BrasilTelecom and Signaling is R2 Digital. The information I have is that are E1s with 32 channels, not have sure. My settings Have been based on the link reference:

Hello everyone. I have a timing slips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 -

Hi, I am running C6.5 64bit on an USB stick connected to a HP DL360G7; It is usually an ESXi host but eg for firmware updates (not available on SPP) I use this local installation. Problem are the lags and unresponsiveness we are seeing for example when running yum update in the installation phase. The whole system stalls but there is no io in vmstat. From what google tells us, this is a

Hi, I'm having problems with a TE420P card, in which I cannot make calls using spans 2 through 4. After a couple of days of working correctly, spans 2, 3 and 4 start failing (can not make calls). The system is configured to work with SS7. After the ACM message goes out, immediately a REL message is returned. I searched for error messages in /var/log/messages and could not find a clue

Asterisk 1.4.32 dahdi-2.3.0.1 Centos 5.5 Digium TE420 CAC channel bank (2) Cisco RVS4000 router Cox 50 Mbps/ 5 Mbps cable modem Flowroute provider codac G-711 90 % CPU idle callwaiting=no When there are 10-15 or more calls up the farend hears a callwaiting like beep every 3 to 6 sec. the duration of this "beep" is very short and would be no problem if it didn?t happen every few

Hi All, I am facing problem with E1 line. I have installed Asterisk (1.4.20.1) on a system with Digium TE420 card (Zaptel- 1.4.10) But every now and then I face problem of down E1's. The log show lot of entries like "pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2" This happens on a regular basis and the E1 becomes up after some time. My

Hi All I'm having some serious kernel panic while using digium cards. It may be related to IRQ shared. Can this cause a lot of drop call and bad voice quality ? Do you guys know if there is a way I can assign one IRQ for each digium card ? Thanks a lot. Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [

So historically I've done one of two things on systems where I've needed to use MeetMe * used a real Digium card, and I've only ever used a TE400 or a TE420 for that purpose, and I know they have the timing chip * used dahdi_dummy, which works well with light load, but I had it running on a very overloaded server and had audio quality issues. I may have had quality issues even with a

Thanks to debugging information from Thomas Mieslinger, I have root-caused the failure of chain.c32 in Syslinux 3.85. I have put out Syslinux 3.86-pre1 and Syslinux 4.00-pre33 which fix the problem. I expect to release a Syslinux 3.86 relatively shortly (ideally in the next two weeks), with bug fixes only. I would like to figure out if there are other bug fixes we can get in in reasonable time,

Yep, another list posting on this topic :) All the messages I've read on this are from people experiencing these errors in quiet times - I get them as soon as I plug a port on our TE410P to an Inter-Tel AXXESS PBX.. and I get them continuously... I'm just sticking an * box in between ISDN30e (we're in the UK so euroisdn) and the PBX.. and whilst the telco ISDN30e side works like

On Wed, Aug 03, 2005 at 11:28:19AM -0500, asterisk-users-request@lists.digium.com wrote: > 10. Inter-Tel AXXESS failure: HDLC Bad FCS (8) on Primary > D-channel of span 1 (Gavin Hamill) > Date: Wed, 3 Aug 2005 15:32:48 +0100 > From: Gavin Hamill <gdh@laterooms.com> > Subject: [Asterisk-Users] Inter-Tel AXXESS failure: HDLC Bad FCS (8) > on Primary D-channel of span

</font> <ul class="D"> <li class="D_off">Two Available PCI Express x8 Slots</li> <li class="D_on">Two Available PCI Express x8 Low Profile Slots</li> <li class="D_off">One Available 64-bit/100MHz PCI-X slot</li> </ul> The list has already answered what goes in what slot so I won't repeat that.