similar to: Force different codecs on call base

Hello list, Grandstream GXP2010 phone calling to Snom 320, Asterisk in the middle. Grandstream allows for 8 different codec specifications. I have defined them as 4 x G726 & 4 x alaw. Snom allow for 7 different codec specifications. I have defined them as 3 x G726 & 4 x G729. The SIP peers are both defined as : disallow=all allow=g726 allow=alaw allow=g729 allow=gsm This is the

Hello, We have 2 SIP trunks from Bandwidth.com and if both are in use and someone tries to dial out, they cause another call to get one-way audio (the caller hears us, we cannot hear them). This happens 100% of the time and Bandwidth.com doesn't offer any support. I don't see any setting that tells Asterisk that there are 2 channels available from Bandwidth.com's IP. I'm

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Anyone have an example XML file for the PAP2T? Cheers, j

Hi I'm trying to get the spa 8000 used with a fax machine using t38 passthru i have tried with 1.6.2 and 1.8.3 and is still a no go the provider i use is 012 in israel wich supports t38 (i use it with ffa) could anybody give me a clue how to get this working if it should t38pt is set to yes in sip.conf Thanks, Israel -------------- next part -------------- An HTML attachment was

Hi all, I've an asterisk 1.2.5 running very well for about a 9 months, and suddenly i cannot dial extensions 4XXX from SIP Phones. Now comes the wired stuff... I can dial this extensions from IAX phones as well as from Analogue extensions connected to our legacy pbx, that is installed on front of asterisk. So : Zapata Calls to SIP extensions 4XXX - OK IAX to SIP 4XXX-OK SIP to SIP 4XXX -

Hi C F no asterisk and sip device are not behind same router. actually both are in different countries. how ever when caller and callee are behind same routers voice is just fine (both ways) and i can see re-INVITEs too. but when someone calls from another router then this issue arises. caller can hear the called party but called party can not hear caller. and there are no re-invites issued

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

Hi, I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of this morning 3/30/04 of asterisk, zap and libpri. The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced". When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I can see: [format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data) ==

Hello, I'm wondering if anyone has benn able to successfully get g726-16 passthrouhg to work? I am wanting to use this codec instead of g729 as I'm running out of DSPs using a high complexity codec on the Ciscos. I would think it would work just as g729 does, which has been working fine for me, but it does not. G726-32 does work great however, but it's like Asterisk doesn't

Hello Happy New Year! I succesfully installed the Ports of Zaptel BSD 1.4.0 and Asterisk 1.4.13 (that's the latest in the Ports). To save CPU, I'd like to play PCM WAV files instead of eg. GSM. Per... www.voip-info.org/wiki/view/Convert+WAV+audio+files+for+use+in+Asterisk ... I recorded a sample of my voice using XP's Sound Recorder, then ran the following : sox test_wav.wav -r

With sipura (I tried this with both the 3000 and 841) set to prefer the g726-32 codec, a call from the sipura to asterisk will use g726. Asterisk sip.conf has: disallow=all allow=g726 allow=gsm allow=alaw When the call is from asterisk to the sipura, asterisk will not use g726. It ends up using alaw. I usually use stable but I tried this with head too, and same thing happens. Anybody know how

Hi everybody, A customer requires G726-40 with Asterisk... I know G726-32 is pseudo-standard, but he definitely wants G726-40... Is there any (easy) way, to integrate G726-40 into Asterisk? Has anyone done this before? Any hints? Please help! Due to a misunderstanding, my product manager already offered this to the customer and now i do not know how to do it... Thanks a lot in advance,

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

What is the configuration of H323.conf and openphone in order to run openphone and asterisk together ?

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

Yep I did the same. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Francesco Peeters (Asterisk) Sent: Saturday, 21 January 2006 5:34 PM To: fbraeuer@gmail.com; Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

In the mailing list archives, I found a message that indicates that the IAXy has the ulaw, alaw, and g726 codecs, but I cannot find anything official on Digium's site about it. The Installation Manual has an example iax.conf file that indicates the ulaw codec, so I know that one is good. But we are thinking about using the IAXy over a VPN, to replace our MultiVoip. alaw and ulaw are