similar to: Asterisk 1.6.2.10 video call

I've tried to put a call file to /var/spool/asterisk/outgoing/ to make an outgoing video call, but not succeeded. I could hear the audio, but no video. The asterisk version is 1.4.10, with videosupport=yes The client is eyebeam 1.5.7, with h263 support. Here are some debug messages. It shows the client and asterisk negotiated the video capabilities without problem. However, the 'show

Hi all, I realise that asterisk's codec negotiation has been discussed in the past multiple times. What I haven't been able to understand is how asterisk decides which video codecs to advertise to the other end when canreinvite=no in sip.conf and the initial caller doesn't support video. My tests are quite simple, I use an asterisk with 4 peers all on the same LAN. My sip.conf

Hi, we have 4 asterisk, versions are 1.4.35 1.4.36 1.6.2.18 and 1.4.42 One GrandStream GXV3000 is used for the tests. He is registered to asterisk 1.6.2.18 asa well as 1.4.35. Calling echo test is OK on both servers, get audio and video. Calling echo test from asterisk 1.4.36 bye a SIP trunk from both others servers is also working well. What fail, is video on echo test from asterisk 1.4.42

Hi, I tried to turn on Video and get the following cli-WARNING output -- Executing [8600 at outgoing-kamailio:1] Answer("PJSIP/7000-00000000", "") in new stack > 0x7f46f41ff2e0 -- Probation passed - setting RTP source address to 192.168.8.203:17200 -- Executing [8600 at outgoing-kamailio:2] ConfBridge("PJSIP/7000-00000000", "8600") in new stack --

Hi, We can't read the messages in our mailbox always getting -- <SIP/tootaiAUDIO-00000001> Playing '/var/spool/asterisk/voicemail/default/100/Old/msg0002.slin' (language 'fr') [Oct 11 13:24:50] WARNING[26778]: app_voicemail.c:7802 play_message: Playback of message /var/spool/asterisk/voicemail/default/100/Old/msg0002 failed As you see Asterisk try to read

Playing around with the Grandstream GXV3140. I'm interested in having the video voicemail clips emailed in a format that might be opened by Windows Media Player or even Quicktime. Have been googling around a lot and have tried various bits of OSS to read the resulting .h264 file that asterisk is saving, but having absolutely no luck. A video nut I know took a look at the file and said

Hi all, I am using to Xlite to save video voice mail. when i retreive it, then only video show , no voice is here out. Plz tell me where ,i am wrong , and how i can able to see video plus here audio in voice mail box. I did following configuration In Sip.conf videosupport=yes [phone1] type=friend host=dynamic context= employees mailbox=101 at default

Hi all Maybe somebody has an idea. I'm tracing a very strange phenomena... I've a connection from Asterisk to a SIP PBX. Most calls have a caller ID. Some International calls don't have any. Now it looks like those calls without caller ID never get to the context where incomming calls from this SIP PBX should get to.... Examples: Call with Caller ID: (slightly anonymized)

I am configuring a test Asterisk server (1.8.9.2) to practice setting a single codec globally, to avoid transcoding as much as possible. Since all of my recordings are in gsm format, I am trying to make the SIP clients use gsm everywhere. I am using Ekiga on Fedora 16 x86_64 for my tests. [root at elx2 asterisk]# cat /etc/asterisk/sip_general_additional.conf

Hi, I'm setup the Asterisk 1.4.33 and try test it with the PortSIP SDK( www.portsip.com), but seems the video does not works. When I make the call from PortSIP SDK Demo to GrandStream GXV3140, it's working fine if no video codec selected. If make call with H.264 codec, the PortSIP got "503 service unavailable" response from Asterisk, why? Thanks -------------- next part

how do i troubleshoot no ring tone. It was working and all i added was the lines below now it doesn't ring. Edit sip_nat.conf for proper NAT: localnet=192.168.1.0/255.255.255.0 externhost=pbx.DOMAIN.com (Set your external hostname name here) externrefresh=10 fromdomain=DOMAIN.com (Set your external domain name here) nat=yes qualify=yes canreinvite=no Add extra codecs to

I have 4 asterisk servers. They all have local phones on their local network they manage for SIP based conversations. We then have IAX between them all for inter-asterisk connections. This setup has worked well for nearly 2 years now, minor problems here and there but overall very nice. Recently we acquired some Polycom video conference units. I was able to setup our main server to host all

The Asterisk Development Team would like to announce the release of Asterisk 16.2.0. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk The release of Asterisk 16.2.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release:

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

Surely there must be someone here who can help me with this problem. I have spent weeks trying to get this damned service to work with no luck. I have incoming calls working, but no outgoing. If get outgoing working then incoming don't work. I have sent this problem to this list a couple of times with little or no response, and I _really_ need some help to sort it out. I have an asterisk

Hello, everybody: I'm developing an application using Asterisk and a TDM-400 card. I understand the concept of the difference between GSM and WAV files when using Asterisk, but I'm not happy with the sound quality with the GSM compression. It's merely *acceptable* for a telephone call, but for anything else, it leaves something to be desired. Case in point -- if you compare the

So the call used Alaw as Codec. > Am 13.06.2020 um 17:23 schrieb Luca Bertoncello <lucabert at lucabert.de>: > > Am 13.06.2020 um 13:47 schrieb Michael Keuter: > > Hi > >> Try "sip show peer <peername>" for a phone. > > So: > > mobile phone: > bpi*CLI> sip show peer 0049177xxxxxxx > > > > > * Name :

Am 13.06.2020 um 13:47 schrieb Michael Keuter: Hi > Try "sip show peer <peername>" for a phone. So: mobile phone: bpi*CLI> sip show peer 0049177xxxxxxx * Name : 0049177xxxxxxx Description : Secret : <Set> MD5Secret : <Not set> Remote Secret: <Not set> Context : default Record On feature : automon

Hi list, something crazy here. 2 asterisk on 2 different place (1.4 and 1.8) both having an extension [115], one as type peer (caller side 1.4) and one as friend (callee side 1.8). Phones from both location connect to Asterisk from LAN. Router are Linux boxes. Connection between the 2 sites is done like this: On the callee side [115] ;callee type=friend host=dynamic secret=otherSecret

Dear sir, I got trouble on InnoMedia video phone with Asterisk-1.2.4. If InnoMedia video phone as a caller, then the call will be a success, no any problem. The problem happens: If InnoMedia video phone to be a callee, the call can not make successfully. For instance, Caller 23267668 dialed to callee 23267663, callee 23267663 was ringing. If I picked up the callee's phone, then abnormal