similar to: Recommended *WRT router to run Asterisk?

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

On Tue, Dec 2, 2014 at 2:26 AM, Gregory Sloop <gregs at sloop.net> wrote: > I love the idea of a low-power high-performance appliance. A NAS will > work fine for storage, but it's not going to act as a DC etc. [At least > none that I'm aware of and would trust.] > > Even appliances sorta like this, that I've seen, are easily five times the > price. > >

I just set up a WRT54GS and now I can't dial out or in. sip show registry shows: CODE: SELECT ALL Host dnsmgr Username Refresh State Reg.Time draytel.org:5060 N xxxxx 120 Request Sent I seemed to recall that running in cli always showed a response back, but there's nothing now. Using

Has anybody tried running Xen on an ALIX 2D3 board? http://www.pcengines.ch/alix2d3.htm If not, has anybody ran Xen on a seriously underpowered PC? The reason why I love these boards so much is that they run at 5W! Of course, I would only run Xen on these for testing purposes. It would just be nice to have a very low powered system that I can just "blow away" VMs when I

Guys. Anybody using sipuras 2002 knows if there is a way to make the phones connected to it to autodial an extension when the phone is picked up? For example, if the phone is on a police booth (building entrance) and you want the guys to just pick up the phone and make the phone auto dial the receptionist extension without the guys having to dial anything (ala batphone). Is this possible with

Hi, I'm looking for a good network device that does bandwidth management. It can be integrated in a router or stand-alone, but must be SIP-friendly. I`ve tried the DIR-655 (latest firmware is SIP-hostile, and the latest hardware revisions can't downgrade to the version that worked well) and the DI-724GU (SIP-friendly, but bandwidth management is automated and not configurable

Hi all, I have successfully compiled and installed Asterisk on an Alix board (AMD Geode 500 Mhz + 256 Mb RAM) on top of Voyage linux (a Debian variant). I'm using it at home for a month. I wondered how much it could be loaded, so I tested it with pbx-test: I could place up to 15 simultaneous SIP calls before it got no more responsive. All in all a good, stable and cheap solution for home

Hi Everyone, Knowing that running Asterisk on an embedded board like the Alix2d3 requires some fine tuning. Do you know of any good guides out there that does this from beginning to end? Looking to run this in a small office environment. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

OS: Debian squeeze Samba: 3.5.6 # testparm --section-name=global -s 2>&1|grep ALIX returns nothing # grep ALIX /etc/samba/smb.conf netbios name = ALIX works -- Regards Harry Jede

Hi, I've setup a wlan ap using a an alix 2d2 (AMD Geode LX 500 Mhz + AES Offload) and am now trying to encapsulate the wlan traffic into a vpn (tap bridge). Though even when disabling crypto and digest (there is a crypto engine onboard can be setup to handle tinc encryption), the best throughput I get is aroung 2,9 MByte per second (wget+http) (even if the client is run locally). The network

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Yes please for the notes. I re-ran the tests without the smbldap-tools. I installed phpldapadmin and am able to login to the apache page using the cn=admin, dn=mydomain and create entries. This kind of tells me that LDAP is working Then I run the pdbedit -Lv and it lists all the users. The following happens when I add the LDAP bits to smb.conf and restart samba.The issue seems to be with samba

Hello, I just set up Debian Lenny on a PCEngines ALIX. This board have a GeodeLX processor with hardware crypto accelerator, so I patched my kernel to get cryptodev support. Everything is fine when playin with openssl, but openssh just crash when a large amount of data is transfered. A small example: alix:~# scp 100meg.test localhost:/dev/null root at localhost's password: 100meg.test

Hello, Did anyone succeeded in installing Asterisk on OpenWRT system. pls help. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090724/aee7ee12/attachment.htm

Hi, we're testing Asterisk 1 RC 2 behind ordinary router and NAT. Since we're sharing network with web server it seems like voip packets are not coming through fast enough (Digium demo dies after few seconds...). It's the same if I make direct calls (passing Asterisk) so we conclude it's network problem - it also work normally outside our router... I wonder what solutions can we

hai, im still on holiday but i did see some things a bit, also in addition about the smb.conf in classic mode dns forwarder is predecated, so i suggest avoiding the option. this part, you set ssl off but also set the ports to the ssl ports. ldap ssl = off ldap passwd sync = yes /etc/ldap/ldap.conf BASE dc=mydomain URI ldap://sam3dc.mydomain ldap://sam3dc.mydomain:666 use URI

I've given up on getting the other machine to work so I'm looking at building a new one. The machine will be a firewall/gateway running NAT, Web Proxy with Dansguardian, DHCP, DNS, NTP and VPN (~6 clients). I read so much about VPN encryption and the processor needs, now I am unsure if this will work. I can get this for AMD FX-8120 Zambezi 3.1GHz Socket AM3+ 125W Eight-Core Desktop

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

Did anyone see the article? It''s the first time I really noticed that these little Linksys routers are such a fully fledged linux machine with a decent processor and a replacable firmware. I am now itching to get one to replace the multipurpose firewall desktop machine. Has anyone experimented with the current state of the firmware and how advanced you can get with tc rules? For

Hello I'd like to display CID information on users' monitor running Windows. I know I can run a script through the dialplan to send a datagram that is picked up Impulse Technology's free NetCID (www.imptec.com), but I'd rather use an open-source solution. An alternative would be to use a Windows application that would connect to Asterisk's AMI. I don't know if multiple