similar to: Nat Issue - I think

Hi, Has anyone had a problem setting up two registrations (on the same Asterisk server) on one Polycom phone? When the user tries to make a call on the 2nd line, it works fine. But when they try the first line, the CLI says:- Using INVITE request as basis request - 9f5fe9a5-215d0f3a-b2fbe6b7 at 192.168.1.138 Found peer client _202' <--- Which is incorrect, it should be client_201. And

My latency is kind of high and the voice delay is noticeable. The Asterisk server is on a dedicated host outside of the network. I am performing PAT/NAT using a Cisco router. ns1*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status vitel-outbound/rsreese 64.2.142.22 5060 Unmonitored vitel-inbound/rsreese 64.2.142.116

We are running OCFS2 on SLES9 machines using a FC SAN. Without warning both nodes will become unresponsive. Can not access either machine via ssh or terminal (hangs after typing in username). However the machine still responds to pings. This continues until one node is rebooted, at which time the second node resumes normal operations. I am not entirely sure that this is an OCFS2 problem at all

Hi all, Saw on the net the wip5000 SIP wireless phone from Hitachi, a suprising rig. As anyone successfull in making it work with Asterisk? If so, how do you like it? Regards, Francois Random Thought: --------------- Molecule, n.: The ultimate, indivisible unit of matter. It is distinguished from the corpuscle, also the ultimate, indivisible unit of matter, by a closer resemblance to

Good morning, I'm having suddenly cut-offs and I don`t know why. It's been hapenning since I enabled cdr_odbc/func_odbc in my system. We use func_odbc to register some queue member's events (login, pause, etc.) at an external DB ('remoto' connector) and to uptade local tables at a local DB ('local' connector). Currently we are usind cdr_odbc to Postgresql and cdr_addon

Hello list, I have nat=no and qualify=no in my sip peer definition and still my CLI is flooded with : [Mar 12 10:17:26] NOTICE[20278]: chan_sip.c:12985 handle_response_peerpoke: Peer 'mysippeer' is now Reachable. (30ms / 2000ms) [Mar 12 10:17:26] NOTICE[20278]: chan_sip.c:12985 handle_response_peerpoke: Peer 'mysippeer' is now Reachable. (24ms / 2000ms) [Mar 12 10:17:26]

Hi I have a question regarding CTDB RecLockLatencyMs tunable parameter. Is there any relationship between the RecLockLatencyMs property and the RecoverInterval property? Does one need to be larger than the other? Or if RecLockLatencyMs were increased to 5000ms, should some other setting be changed in proportion? We're using a geo-distributed etcd cluster for the CTDB recovery lock and I

Since upgrding to Debian squeeze, the web mail system (Imp4/Horde3) suffers delays every time a new IMAP connection is needed. Tracing the authentication conversation, we find: 08:45:55.270609: 00000000 AUTHENTICATE GSSAPI 08:45:55.271277: + 08:45:55.271761: * 08:45:55.271782: 00000000 BAD Authentication aborted by client. 08:45:55.271815: 00000001 AUTHENTICATE PLAIN 08:46:00.271008: + and the

Hi all, I have to questions about queues. Member is a phone like SIP/myphone and only one member in the queue. At first, DIALSTATUS doesn't return any status. How to now if a call in queue has been answered or if caller just hangup? Second, how to deal with timeout, I have strange behaviors. If I put timeout=60 in queue.conf and I call the queue passing also 60 as timeout value,

Hi, I've just created again the gluster with NFS ganesha. Glusterfs version 3.8 When I run the command gluster nfs-ganesha enable - it returns a success. However, looking at the pcs status, I see this: [root at tlxdmz-nfs1 ~]# pcs status Cluster name: ganesha-nfs Stack: corosync Current DC: tlxdmz-nfs2 (version 1.1.16-12.el7_4.5-94ff4df) - partition with quorum Last updated: Wed Dec 20

I have a call server that runs on a few custom AGI scripts initiating calls and then managing the calls. I'm getting stuck on the detecting silence functions. I wanted to use the silence detecting as a quick method of substituting Answering Machine Detection. However, whenever WaitForSilence is supposed to be detecting silence, it always just ends the interval whether or not there is

I have a call server that runs on a few custom AGI scripts initiating calls and then managing the calls. I'm getting stuck on the detecting silence functions. I wanted to use the silence detecting as a quick method of substituting Answering Machine Detection. However, whenever WaitForSilence is supposed to be detecting silence, it always just ends the interval whether or not there is

Hi, I have a 2-node cluster on 2 Dell PowerEdge 2650. When remove a device path, and both nodes crashed. Any help would be appreciated. Thanks! Roger--- Configuration: Oracle: 10.2.0.1.0 x86 Oracle home: on OCFS2 shared with multipath Oracle datafiles: OCFS2 shared with multipath cat redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 2) uname -a Linux sqa-pe2650-40

Hello, We have a four-node RHEL4 RAC cluster running OCFS2 version 1.2.8-2 and the 2.6.9-67.0.4hugemem kernel. The cluster has been really stable since we upgraded to 1.2.8-2 early this year, but this morning, one of the nodes fenced and rebooted itself, and I wonder if anyone could glance at the below remote syslogs and offer an opinion as to why. First, here's the output of

Hi, we have recently started to use ocfs2 on some RHEL 5.5 servers (ocfs2-1.4.7) Some days ago, two servers sharing an ocfs2 filesystem, and with quite virtual services, stalled, in what it seems on ocfs2 issue. This are the lines in their messages files: =====node heraclito (0)======================================== /Dec 4 09:15:06 heraclito kernel: o2net: connection to node parmenides

Look in the startup logs and see where itnis starting. I'm not at a RH system at the moment, but at work, I have had to do this, so can look there,mor perhaps put Nut on the test RH8 VM I spun up for other rrasons on Friday and work out the syntax. Not sure if the systemd file you are using came in the RPM or not, but if it did, it's almost a crime that this critical detail was overlooked.

Hi, In your ganesha-ha.conf do you have your virtual ip adresses set something like this?: VIP_tlxdmz-nfs1="192.168.22.33" VIP_tlxdmz-nfs2="192.168.22.34" Renaud De?: gluster-users-bounces at gluster.org [mailto:gluster-users-bounces at gluster.org] De la part de Hetz Ben Hamo Envoy??: 20 d?cembre 2017 04:35 ??: gluster-users at gluster.org Objet?: [Gluster-users]

First, the Asterisk settings: ----- sip.conf ----- [general] port=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) context=default ; Default context for incoming calls disallow=all ; First disallow all codecs; Set order allow=ulaw ; also known as g.711 PCMU; allow codecs in

I checked, and I have it like this: # Name of the HA cluster created. # must be unique within the subnet HA_NAME="ganesha-nfs" # # The gluster server from which to mount the shared data volume. HA_VOL_SERVER="tlxdmz-nfs1" # # N.B. you may use short names or long names; you may not use IP addrs. # Once you select one, stay with it as it will be mildly unpleasant to # clean up

This is just code refactoring. --- src/launch.c | 172 +++++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 109 insertions(+), 63 deletions(-) diff --git a/src/launch.c b/src/launch.c index 46d7ab9..84d5e82 100644 --- a/src/launch.c +++ b/src/launch.c @@ -293,9 +293,7 @@ guestfs_impl_config (guestfs_h *g, #endif #if defined(__aarch64__) -#define EARLYPRINTK "