similar to: Asterisk 1.6.2.13 IAX2 Realtime issue

I have 11.4.0 on an Amazon EC2 instance. SIP works fine, but I can't get iax to work. I've opened 4569 in the EC2 Security Group. I'm using the zoiper client. Using tcpdump I can see the zoiper packets coming in on 4569, but nothing shows on the asterisk cli. Frame 33: 79 bytes on wire (632 bits), 79 bytes captured (632 bits) on interface 0 0000 12 31 3b 12 40 84 fe ff ff ff

Hi, I created an IAX2 trunk between my old Asterisk 1.4 server (A) and my new one with v. 16.10.0 (B). The trunk seems to be up, and the calls are initiated, eg. an extension from A can dial an extension in B which rings. However, as soon as the extension in B answers, the call is terminated. This is what I see in the console of B: -- Called PJSIP/4053 -- PJSIP/4053-00000002 is ringing

Hello, I'm trying to conect two 1.6.2.13 Asterisk server with IAX. This is my configuration: Asterisk A: iax.conf register => coiax:pass1 at 69.164.207.166 [smiax] type=friend host=dynamic trunk=yes secret=pass2 context=phones deny=0.0.0.0/0.0.0.0 permit=69.164.207.166/255.255.255.255 qualify=yes Console: iax2 registry 69.164.207.166:4569 N coiax 69.164.197.105:4569

Hello, I'm trying to configure Asterisk with Radius cdr support. Asterisk version 1.6.2.13 Server Radius: Freeradius version 1.X Radius client: radiusclient-ng version 0.5.5 With the Asterisk core debug on 1 when a call terminate, on the console appear this error: Unable to create RADIUS record. CDR not recorded! My cdr.conf is: [radius] usegmtime=yes ; log date/time in GMT

hello, I'm trying to connect Asterisk to Google Calendar. The connection work fine but Asterisk don't retrieve any programmed event present on the calendar. Asterisk version 1.8.20.1 Any hint? Thank you - Bakko

Hi All, I'm having problems getting results from a PHP file. This is what the CLI is showing. -- Executing [111 at internal:1] AGI("Console/dsp", "GoTalk.php") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/GoTalk.php [Dec 14 11:57:25] ERROR[20260]: utils.c:1019 ast_carefulwrite: write() returned error: Broken pipe If I run the PHP file from

Hello, I'm trying to use SIP_HEADER function on my dialplan but I receive this message (on the console): pbx.c:3367 ast_func_read: Function SIP_Header not registered Why? Thank's - Bakko

I just upgraded a very old Asterisk installation to the last 1.2.31 I can find in Asterisk.org site. Now for some reason my IAX clients cannot connect to the server. I can do a "iax2 show peer iaxmodem1" and I get this: * Name : iaxmodem1 Secret : <Set> Context : oficina Mailbox : Dynamic : Yes Callerid : "" <> Expire

There isn't much documentation on adsi, but I called NETXUSA (the vendor of my 480e) and they helped me along. My experience: 1. I really had no experience with ADSI so I had (probably still have) some misconceptions on how the configuration is loaded onto the phone. 2. I set the following in my /etc/asterisk/asterisk.adsi (most of this is the stock asterisk.adsi script): ;

Hi, I'm trying distributed events with Openais but don't work. I made the test with two asterisk box in the same LAN box A: 192.168.142.246 asterisk 1.6.2.13 BoxB: 192.168.142.248 asterisk 1.8.0 openais.conf: # Please read the openais.conf.5 manual page totem { version: 2 secauth: off threads: 0 consensus: 4800 interface { ringnumber: 0 bindnetaddr: 192.168.142.0 mcastaddr:

Hello, I have some problems in placing calls through IAX... It does not work :) in the asterisk console I can't see nothing about dialplan enter or so, IAX debbugging seems to be unuseful... this is my configuration: [612] type=friend secret=123456 notransfer=yes disallow=all allow=gsm allow=ulaw allow=alaw context=from-internal host=dynamic requirecalltoken=no I enabled IAX debugging, but

Hi all asterisk 1.8.23 I have odbc all setup to mysql but cant figure out why the dialplan wont write to the odbc function fubc_odbc.conf [DEVICES] dsn=device-conn ;dsn in res_odbc not odbc.ini readsql=SELECT call.callNum, call.city, devices.callId, devices.id FROM call INNER JOIN devices ON call.id = devices.callId WHERE deviceNumber = '${ SQL_ESC(${ARG1})}'

Hi , Is it possible to have two meetme room in asterisk 1.6 which each one have a different language? I mean, one room the annoucement is in Portuguese an another in english? Today I can change over the sip.conf and it is valid for all room. regards! Att, Flavio Roberto Miranda MSN:flaviormiranda at hotmail.com Skype: flaviormiranda -------------- next part -------------- An

Hello *'s, I have question regarding Quintum Tenor AXT800 VOIP gateway can anyone integrate it with asterisk if anyone what is the scenerio i have scenerio which is quite simple but i am confused about it whether it is possible or not : I integrate it with asterisk for interanet no PSTN at all just only IPphones and analog phones connected on FXS port.Is it's neccassary to cannect with

Hopefully this is really a generic question about IAX and doesn't turn out to be something specific to Teliax, because they haven't been too helpful so far. All they can tell me is that my login shows "status unknown" on their end, which prevents me from receiving inbound calls on my Teliax number. Outbound calls through the same server work fine, which rules out most networking

Hi i have a small problems on two Asterisk Server 1.6.4 : The first sent the call to the second, and in the second, i have a error : [Nov 15 15:30:12] ERROR[5113]: chan_iax2.c:4529 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address IP_FIRST_ASTERISK in the calltokenignore list or setting user 04TELNUMBER requirecalltoken=no on the second

I had two asterisk servers connected with each other, both were 1.4.22 but I've upgraded one to 1.4.37 and now I get a message when I try call from asterisk-1.4.22 to asterisk-1.4.37 ERROR[4539]: chan_iax2.c:4330 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.140.1 in the calltokenoptional list or setting user guest

Hi all, Just hit this problem for the first time: WARNING[17712] chan_iax2.c: Too much delay in IAX2 calltoken timestamp from address 10.25x.xxx.160 When I ran "iax2 show peers" everything comes up as unreachable, no calls are passed between the servers (as would be expected) but there is no problem with DAHDI / SIP channels. At the same time there are no network issues (can ping all

Hi Everyone, We use the top buttons on Aastra 55i to login and logout from Queues. This is the order: Button 1 = Login to English Queue Button 2 = Login to Spanish Queue Button 3 = Logout of English/Spanish Queues There are indicator LEDs on each of these buttons. Is there anyway we can send a SIP request or some other communication to get the Aastra 6755i phone to keep the LED for login set

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the