similar to: dahdi module disappears from AsteriskNow after kernel update

My AsteriskNow box was updated to Centos 5.6 (2.6.18-238.5.1.el5) and DAHDI doesn't want to load. I've tried building it from the sources, but get this error message: CC [M] /root/Desktop/dahdi-linux-complete-2.4.1.1+2.4.1/linux/drivers/dahdi/xpp/card_bri.o In file included from /root/Desktop/dahdi-linux-complete-2.4.1.1+2.4.1/linux/drivers/dahdi/xpp/xpd.h:31, from

I'm running an AsteriskNow V1.7.1 with both a PSTN connection and fax machine. Both are connected to a DAHDI board. I'd like to route incoming PSTN fax calls to the extension of the fax machine and process non-fax calls through different dialplan.logic. What's the best way to go about doing this? I've looked into Fax for Asterisk, bit I'm not sure that I want it or NVFax

but I need to apply this patch to the tar file in the dahdi-linux-2.2.0.2-1= _centos5.src.rpm and rebuild it, but that , `dahdi-linux` pulls in: dahdi-firmware dahdi-firmware-oct6114-064 dahdi-firmware-oct6114-128 dahdi-firmware-tc400m kmod-dahdi-linux kmod-dahdi-linux-fwload- yum-kmod That of which contain dahdi-firmware and kmod-dahdi-linux-fwload-vpmadt032 = which don't have srpms

After using the CentOS repo's at digium to install dahdi Linux & tools, I got this: Installing : kmod-dahdi-linux-fwload-vpmadt032 WARNING: /lib/modules/2.6.18-164.9.1.el5/dahdi/dahdi_vpmadt032_loader.ko needs unknown symbol voicebus_transmit WARNING: /lib/modules/2.6.18-164.9.1.el5/dahdi/dahdi_vpmadt032_loader.ko needs unknown symbol vpmadtreg_unregister WARNING:

Dear asterisk users, We want setup TE121 digium board: Model: Digium TE121: VoiceBus technology allows the TE121 to use an industry standard bus-mastering PCI Express interface. http://www.digium.com/en/products/digital/te121.php My platform Server: HP Proliant 150 G5 OS: UBUNTU x86_64 GNU/Linux Asterisk: 1.4.21.2 zaptel: SVN-branch-1.4-r4662M When we enable zaptel driver for TE121, the

Hi, Just trying to figure out / solve some echo issues with one of our systems. The server is a Dell R710 running Asterisk 1.6.x and Dahdi 2.2.x The card in the server is a TE121P (with VPMADT032 echo canceller) We are experiencing some weird echo issues with our Cisco 79xx phones, only when we are dialing out via the PRI. The echo is like a side tone, where we can hear ourselves speaking. The

Hello, I'm writing here hoping to have a hint from Asterisk/Digium packager maintainer, Jason Parker (of course that any other's opinion is welcomed). We have installed an asterisk machine using Asterisk and Digium repos. Unfortunately we have found that an Astribank could not be connected due to the lack of the firmware files May 18 14:19:22 tenora1 kernel: usb 1-6: new high speed USB

Is it possible to get .spec or .src.rpms for packages on packages.digium.com? I specifically need to rebuild kmod-dahdi-linux-fwload-vpmadt032 for the kernels available in CentOS 5.10. I see there?s source at downloads.digium.com/pub/telephony/firmware/releases, but .spec files are not included. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc

I'm running Asterisk 1.2.13 on a Solaris 10 X86 box behind an IPCop firewall on a 5Mbps down/512 up cable connection. I'm having sound quality problems when users call in for voicemail and with music on hold. The sound is choppy and muffled while souding pretty good for calls inside the network. I'd appreciate some pointers as to where to start looking to improve things. I've

I'm looking to build the zaptel drivers on a Solaris 10 X86 box. I've found the driver source code on https://svn.sunlabs.com/svn/solaris-asterisk but this source is posted along with Asterisk 1.2.7.1 Does anyone know of a fresher version? Is this code considered "somewhat ready for prime time use"? Thanks, Frank

Hi Asterisk Users, We've been experiencing some tough time regarding a new Asterisk installation connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional VPMADT032 echo cancellation module. For now, I'll focus on something very specific which is summarized on this email's subject. However, here are some general facts for the context: - System pbxfri went

Hi How can i know the version of my vpmadt032 firmware? Thanks Ruben

Running Asterisk 1.6.2.9, DAHDI 2.3.0.1, CentOS 5.5 (update to date as of a week ago), I've installed a Digium AEX800P with 2 X400M FXO Modules and 1 VPMADT032 Module, hooked up to 5 analog lines. I get the error message referenced in the subject in my dmesg output everytime I load / reload DAHDI using the command "system dahdi start/restart". When I make an outbound call over

Alle, I have a major problem. I'm running CentOS 5.5 on some rather old hardware (Dual Celeron 500MHz with 768MB of memory). Sometime in the last week, the DB became corrupted (I noticed when yum update would hang). I've tried running rpm --rebuild with both the 2.6.18-194.17.4 and 2.6.18-194.26.1 kernels and get a segmentation fault each time. Consequently, I'm pretty much stuck

Hi pals, Pardon me if this question sound basic please. This is the first installation where I have to use the analogue card and therefore a little lusty. I have googled a lot, but though there is a lot of information about the above file, none indicate where the file lives. I have a installed asterisk and zaptel software on a fresh installation of CentOS 5. This all from source and following

I just purchased an Amfeltec USB-FXO adapter and am trying to compile DAHDI 2.10 on a Raspberry PI running Pidora 2014 R3. I have all the dependencies but I get an error and cannot finish. Is it even possible to compile DAHDI for the ARM plataform? Here is the error I am getting: root at astpi dahdi-linux-complete-2.10.2+2.10.2]# make make -C linux all make[1]: Entering directory

I'm trying to set-up H.323 support under Asterisk. I built a recent CVS release and the ooh323c code from the asterisk-addons. Everything built and installed and the H.323 stuff loads OK when asterisk starts. What is the easiest way to check if the H.323 code is working? I've edited the h323.conf and extensions.conf files but I'm sure that things aren't right. I've

I'm trying to get a MP-114 FXS/FXO gateway working with Asterisk. It registers fine and I can call between the MP-114 and other extensions, but I'm not having much luck with the FXO ports. syslog shows the problem to be in the MP-114 configuration. Can anyone help?

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> <span class="postbody">Greetings,<br> I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium TE121B PCI express card with a </span>VPMADT032<span

I'm having a problem with my IAXy not always connecting to my Asterisk box. When I pick-up the phone plugged in to the IAXy I get a busy signal. I have to hang-up the phone and wait a few seconds after the orange LED goes out and then try again. When this happens I don't see any connection attempts in the Asterisk -r output. When I do get the IAXy to connect to Asterisk I get a